|
|
CSD Series Switching Power supplies, in modular DIN case with Class 2 double isolation, 90…264Vac/100…350Vdc input.
Items with adjustable 5…15Vdc, adjustable 12…15Vdc, adjustable ±12…±15Vdc and 24Vdc output, 0.6A , 1A , 2.5A , 3A output currennt in 2 or 4 module-cases are available.
EMC compliant to Civil application standards; RoHS compliant; no grounding needed;
Short circuit, overload, over temperature, input / output overvoltage
protection. Designed for use with SELV and PELV circuitry. |
|
Convel DIN rail mounting supplier of power supplies are designed for quick and trouble-free installation onto 35mm profile Din rails.
With outputs ranging from 5V to 24V and maximum current capabilities of 100mA to 4A, these units are ideal for many instrumentation and sensor applications.
Every model in the range is provided with output current foldback limiting and is fully short-circuit protected.
Great attention has been taken to usability and safety.
Link selection allows the use of 115 or 230V supplies without derating. |
|
| MTM Power GmbH, the specialist of individual power supplies, has designed a new generation of Din rail psus, series HSA, for industrial application. As universal compact power supplies, they have an output power of 120 or 240 W. One of the major advantages is to increase to a maximum the readiness for operation of the system to be supplied even under difficult conditions. With dimensions of 50 x 130 x 130 mm (HSA120) and 80 x 130 x 130 mm (HSA240), they perfectly fit into professional cabinets only offering little space. The devices are available with output voltages of 12, 24, 36 and 48 VDC. They have a high efficiency of up to 89 %, are continuously short circuit protected and need no ground load. The output current is electronically limited in case of overload and the devices then change into constant current operation. Due to this characteristic curve and the reduction of the output voltage to 0 V at the same time, they are protected against short circuit damages and thus offer the possibility to supply loads with high inrush currents without switching-off or intermitting resp. |
|
| MTM Power GmbH, the specialist of individual power supplies suppliers, offers power supplies for DIN rail mounting with 15 to 75 W. These primary switched modules have been designed as universal compact power supplies with wide input ranges for worldwide applications in switching professional cabinets and allow an efficient, cost-saving solution for different tasks. They are vacuum encapsulated which allows the use under critical environmental conditions. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. MTM Power Din rail power supplies comply with the Low Voltage Directives as well as the up-to-date EN standards as regards CE conformity. All devices are short circuit protected, need no ground load and are available with various modification possibilities. |
|
X-Series: Semi-regulated 3-Phase power supplies 960W
Power supplies in the DIMENSION X-Series include an innovative concept for genereating a DC-voltage from a three-phase input.
- Output voltage: 24V (units with output up to 72V available)
- Output current: 40A
- 25% BonusPower
- AC-input 400V-Unit: 3AC 400V
- Efficiency: 95.5%
- Operational temperature range: -25°C to +70°C
- Dimensions: 96x235x157mm
- Weight: 1.4kg |
|
- Unparalleled compact design, up to 55% less space required
- Unmatched efficiency of up to 95%
- MTBF > 600 000h, specified capacitor lifetime > 50 000h
- 80W to 480W output power
- 1-phase or 3-phase input
- Metal housing
- Quick-connect spring-clamp terminals
- Output voltages from 12V to 56V
- 150% peak load capability up to +60°C
- DC-OK relay contact
- Operation from -25°C to +60°C
- Active PFC, even for 3-phase input
- 85V to 264Vac wide-range input (single phase)
- DC input from 88V to 370Vdc (single phase)
- Extra low inrush current
- Ride through buffer units
- Decoupling modules |
|
* HiTech for most demanding industrial applications
* 12-56V, 2,5-30A
* Very high efficiency rates up to 93%
* Class B limits (emissions) for input and output
* Easy mounting and fusing
* Power Boost (up to 25% more capacity, no need for
overdimensioning)
* Ideal also for parallel operation
* World-wide approvals (UL, EN, CSA, CBScheme)
* Excellent cost-benefit ratio |
|
- 25W to 100W output
- 1-phase input
- Molded plastic housing
- Quick-connect spring-clamp terminals
- Output voltages from 5V to 56V
- Special measures for parallel operation
- Decoupling module for redundancy
|
|
RPS-30: Industrial din rail power supply for automation systems, in plastic cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-30:
- universal AC or DC input (full range),
- protections: short circuit, overload, overvoltage,
- cooling by free air convection,
- Led panel meter for power on,
- 100% full load burn-in test,
- fixed switching frequency at 100 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
RPS-120: DIN rail power feeder for automation systems, in metal cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-120:
- AC input range selectable by switch,
- protections: short circuit, overload, overvoltage, overtemperature,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 55 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
Compliance with EMC standards:
- EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B,
- harmonic current: EN61000-3-2,-3,
- EMS immunity: EN61000-4-2,3, 4,5,6,8,11, ENV50204, EN55024,
EN61000-6-2, EN61204-3 Heavy industry level, criteria A.
|
|
General Purpose 24 to 240W
The TCL series is a family of DIN-rail manufacturer of power supplies which come in ultra compact, light weight plastic housing. These products offer an economical solution for many applications in the industrial, office or residential environments. Easy snap-on mounting on DIN-rails or also wall mounting with an adaptor.
High Performance 70 to 600W
The TSP series represents a new generation of high performance DIN-rail power supplies with innovative and powerful features! Shock and vibration proof construction with a rugged metal case these products are designed to work reliable even under most difficult factory conditions. Excellent electrical specifications and high immunity against electrical disturbances makes the TSP series product the best choice to power sensitive loads in industrial process controls, equipment tools or other demanding applications. A high power reserve guarantees a reliable start-up of loads with high inrush currents as i.e. motors. 14 standard models are available with tightly regulated, adjustable output voltages of 12, 24 and 48VDC for up to 25A. The power supplies are specified for industrial operating temperatures from -25°C to 70°C with convection cooling and provide also a thermal overload protection. All models feature as standard Remote ON/OFF and remote diagnostic via relay contacts or NPN output.
Low Profile Case 50 to 600W |
|
DC – PROFESSIONAL UPS Systems for Safety Relevant Installations
With their modular construction, the latest DC – UPS systems in the GTLB/GTPB series from Zentro Elektrik expand the existing comprehensive range of DC – UPS systems for supplying power to safety relevant installations.
The AC/DC systems in standby parallel mode are designed for outputs
from 250 Watt up to 600 Watt and fitted with professional batteries at the customer’s request. Additional DC/DC converters can be added to the system if more output voltages are required.
A battery control and monitoring module allows to control the charging current and temperature control of the charge closing voltage.
Over and above this, numerous monitoring and control signals are provided via relays, LED’s or manufacturer of potentiometers. A signal relay, for example,
if the charging voltage fails, to switch off the battery on it reaching the closing discharge voltage, to give advance warning of reaching closing discharge voltage with an additional adjustable threshold or individual limitation of the battery charging current to prolong battery life, and
many more. Light emitting diode displays and adjustable potentiometers provide for comprehensive signalling and the ability to adjust the maximum charging voltage or the defined point of battery switch-off. |
|
Din rail switched mode power supplies with high performance and compact dimensions, in linear or switching technology. For instance, the 240W/24V/10A model come with PFC, 3-phase wide range input and are only 125 x 125 x 125mm.
- DC output: 12V or 24V fixed, 12...14V, 24...27V, 48...56V adjustable
- AC input: 230V or 90..264 (wide range)
- Powers from 6W to 960W
- Linear and switching mode types
- PFC
- 3-phase variants
- Remote sense
- Power fail output |
|
| MPD now offers a full range of standard DIN-Mount AC/DC power supplies. Ranging from 45W to 240W (upcoming releases will extend the line to 960W) these units offer high power density, universal AC inputs, full international approvals (including UL 508), and Din track mounting capability. If your equipment requires a rugged, high performance industrial power source and the convenience of DIN rail mounting; we have a low cost power supply to fit your needs. |
|
| The WSX43P is a Din rail mounting power interface board which extends the versatility of the WSX43B Precipitation detector by proving mains power interface, adjustable set-point temperature and higher power relay output. |
|
| ... products without technical information |
| |
Linear movement has traditionally required separate components to handle both drive and support/guidance. The patented Kerk® ScrewRail combines both functions in a single, coaxial component. By eliminating the need for external rail-to-screw alignment, the ScrewRail simplifies the design, manufacture and assembly of motion systems. The ScrewRails coaxial design saves as much as 80% of the space used by a two-rail system and is generally less expensive than the equivalent components purchased separately. The savings can be substantial due to lower component costs and reduced labor.
An added benefit is the ability to get three-dimensional motion from a single ScrewRail. When mounted vertically, the ScrewRail can be used to simultaneously lift and rotate (Z-theta motion). With one motor driving the screw and a second rotating the rail, a compact, self-supporting pick and place mechanism can be created.
The ScrewRail Linear actuator manufacturers consists of a precision rolled leadscrew, supported by sealed manufacturers of bearings and contained within a concentric steel guide rail, driving an integrated nut/bushing. Because all the alignment requirements are achieved within the ScrewRail, support and positioning of the ScrewRail is much less critical than with traditional slide assemblies. Kerkote® TFE coating and self-lubricating nut/bushing materials ensure long life without maintenance.
|
|
Rectilinear Motion Enabled With A Round Shaft
The NB Industrial slide Screw is a unique drive unit which makes efficient use of friction to convert rotary motion to linear movement. This unit is a very simple mechanism containing only radial bearings in contact with a shaft, providing ease of maintenance. Even if an accident occurs, this unit slips on the shaft, stopping itself to prevent further damage. The unit is applicable to a wide variety of devices by fully utilizing its features, although while accurate positioning would require an extra control.
|
|
Linear bearing Low (LBL) Profile Rail Slides
SETCO offers 6 standard sizes of Linear Bearing supplier Low (LBL) profile rail slides; 200, 300, 400, 500, 600 and 800mm slide widths. Linear bearing slides are sometimes referred to as "rail slides" as the bearing lines ride on rails. Linear bearing slides offer smooth low friction linear movement in a low profile compact package. Linear slides provide high rigidity and stability and can be applied to applications experiencing heavy loads, moments and high positioning speed applications.
Standard Features:
Precision Class Globe bearing Units with Bearing Professional seals
Arranged with Basic Lubrication Manifold and Piping
Base Mounting Holes
Accordion Protectors
Slide Side Protector Plates
Designed for Universal Mounting Attitudes
Ground Steel Plate Stress-Relieved Saddle
Base is Device tool Grade Cast Iron Stress-Relieved
and Normalized to Minimize Distortion
Top, Bottom and Side Surfaces are Ground Flat and Parallel
Both Ends of Saddle and Base are Machined
SETCO's Precision Slide Registration Certificate |
|
Complementary to the popular and proven PRT Ring Professional slides & Track System, DTS is a fully integrated professional belt-driven track system, and includes a couple of ingenious features amongst its many 'reduced engineering' attributes.
Available in either rectangular or oval format and in two rail sizes (25 and 44), DTS can be supplied as a stand-alone unit in conjunction with the MCS Machine Construction System, or as a sub-assembly on its own bespoke mounting plate. A steel-reinforced timing belt supplier drives an unlimited number of carriages via adjustable pulleys under either continuous or intermittent motion.
Optional features include the Trip Latch mechanism, which disengages the drive from individual carriages which may become impeded, saving the system from damage. Also the Carriage Locking System will be particularly useful during intermittent motion. It locks any number of carriages into a fixed and repeatable position for further operations to take place.
A range of control and sensing operations are available, and the system may be specified with a plain output shaft, fitted AC Geared Motors, or a range of gearboxes for customers' own motors to be added.
|
|
|
|
see the results for the following category
