|
|
|
The product family PMN/PCMN with low voltage input completes the range of primary switched MTM Power Modules. The modules offer input ranges of either 20/30...60 VAC or 18/30...72 VDC and allow - due to the different types available in this series - efficient solutions in numerous application fields. The vacuum encapsulated devices offer an isolation of 3,3 kVrms and comply to the up-to-date EN standards as regards CE conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. The series PMN/PCMN offers 10 and 30 W constant output power, is short circuit protected, needs no ground load and is designed for PCB-mounting (PMN) or chassis mounting (PCMN).
|
|
|
The NEW and compact generation of AC-DC converters with universal input range for worldwide use. This small 150 W unit, is available with 5 single outputs. It’s very compact design with an ultra low profile suits very well for U1-size racks and systems. A highly effiecient (89-90%) and reliable converter for high end applications like Semiconductor-equipment, traffic-information systems, LED displays, etc. NEE –Series are safety approved acc. to UL, C-UL EN.
|
|
|
The LRMY series which combines small size, high efficiency, low price and high reliability has been developed to be comprehensive and can be used with full range for input voltage of 85-264Vac, anywhere in the world. As an open frame type it is possible to mount the unit in two side. For the Molexconnectors is possible to have the complete wire harness as option (add WH).
|
|
RS-300 Regenerative Source
The RS-300™ is a regenerative three phase AC/DC converter intended to supply constant DC link voltage to AV-300 series inverters. The unit is also able to supply a DC input to inverters of other brands. The output DC link voltage of RS-300 is kept constant within a specified range even if the inverter operates in regenerative mode and supplies the power back to the DC link. The RS-300 converter is designed for continuous operation in regenerative mode up to the full rated current of rectifier mode. This makes it possible to use a RS-300 fed inverter in applications which require continuous regeneration.
Features and Benefits:
Can feed single inverter and multiple inverter systems
Energy savings for applications which require frequent regeneration
Optional keypad programmer or standard GE Toolbox
Two choices for start-up and tuning
Windows® based GE Toolbox
Set parameters and program converter I/O, self-tune regulators, or keypad
Communication Options
|
|
ACD26
The open-frame power supplies are available in special EX-protected versions with 48 watts and triple output.
* Open-frame
* EMI-compliant Design
* Wide Range Input 85 ... 264V
* Dual Output 25.5W
* MTBF 400,000 h @ Tamb 40°C
* Outputs with Common Ground
* Savety Approvals Available
|
|
Low cost modular power solution
- Customized Power Supplies
- Universal AC Input
- Power factor Corrected
- Capable of up to 16 fully regulated and independent outputs
- Output Voltages from 1.8V - 48V
- Low Leakage Medical Options
- Input Transient Protection
- Compact Package
- International Safety Agency Approvals
Other Lambda Solutions
- Sirius 250-350W Modular
- NV 350W Modular (1U)
- Vega 450-900W Modular
|
|
| ... products without technical information |
| |
The Danfoss VLT 6000 HVAC, dedicated to HVAC applications, provides unsurpassed performance, energy savings and improved control of HVAC systems – including interfacing with building management systems.
Precise control of temperature, pressure, and flow in HVAC applications result in the best environmental performance for building owners and operators.
|
|
Advanced Control Features:
- Displacement and force monitoring
- Force control
- Envelope function
- Combo mode
- Energy and time limits
The HF27 High Frequency Inverter precisely controls and monitors electrical AND mechanical weld parameters. Miniature welds are highly sensitive to small heat profile fluctuations in the resistance welding process. Overheating deforms and destroys parts, while under heating results in a weak, unacceptable bond. To achieve consistent, reliable welds of small to microminiature parts, precisely controlled heating is required. This necessitates superior control of the energy output.
|
|
Characteristics
0 to 200Hz output frequency
V/f control with several preset and one user definable V/f patterns
Very low audible motor noise thanks to the optimised PWM control
Built in DC reactor and dual diode input (12 pulse) for harmonics reduction on models of 22kW and above
Intelligent energy saving function
Integrated PI controller with HVAC dedicated functions
High Slip Braking (Can reduce the deceleration time without using a braking resistor)
Very smooth speed search function working in both directions
Available Communications options:
- DeviceNet
- Profibus-DP
- Interbus-S
- CANopen
- LONWorks
Integrated RS-422/485 port for Memobus communications
HOA operator (optional)
CE, UL, cUL and German Lloyd compliant
|
|
|
Yaskawa is the largest global variable frequency drives manufacturer with over 30 years of Building Automation System (BAS) and HVAC experience. Our variable frequency drives are designed for HVAC applications, which include air handlers, cooling towers and pumps, by combining reduced size and cost with step changes in performance and quality. The drive features for Building Automation Systems include extensive parameter selection which simplifies management of BAS applications for energy efficiency and closed loop control, industry-standard Hand/Off/Auto functionality, an internal PI controller and a Sleep function. Because all variable frequency drives (VFDs) are rigorously tested, Yaskawa ensures that quality and reliability are designed and built in.
|
|
| ... products without technical information |
| |
Celesco OEM Customer Specific Cable Position Transducers.
Our OEM line offers compact, flexible and accurate position measurement devices engineered specifically to customer specifications. These models can provide the perfect low cost OEM solution for your application. These cable transducers are compact, easy to install and don't require precise alignment making installation fast, simple and trouble-free.
Additionally these models can weigh less than a pound, be less than 2 inches high when retracted, yet measure out to 60 inches! These devices are constructed with a flexible stainless steel measuring cable wrapped around a spring-loaded spool offering advantages over other sensing devices. These sensors are low cost, compact measuring cable does not have to be perfectly aligned,
Z250
Spool Size: 250 mm
Stroke Range Options: 250, 750, 1250, 2500 mm
Potentiometer Options: 500, 10K ohms
|
|
| ... products without technical information |
| |
IT251: Frequency Divider, Level Converter and Direction Translator for Encoder Signals
Impulse and frequency divider for incremental encoder signals
Error-free division of quadrature encoder signals, with adjustable ratio from 1:1 to 1:4096,
with separately adjustable divider for marker pulse
Level converter for incremental encoder signals A/B/Z to both directions
(TTL / RS422 to HTL and HTL to TTL / RS422, see drawing)
Includes also translation between various modes of indication of the direction of rotation
Max. input frequency 300 kHz
Power supply 18 - 30 VDC
Compact housing for DIN rail mounting
|
|
The DEWE-ORION-1624-200 is our top of the line DSA (dynamic signal analyzer) A/D card. With 16 simultaneously sampled 24-bit inputs and robust AAF (anti-aliasing filtering), the ORION-1624 provides more than 100 db of S/N ratio via over-sampling sigma-delta ADCs on every channel.
We offer a variety of A/D card series, to fit exactly your application! From the high-end dynamic cards in the DEWE-ORION series, to the multiplexed and highly affordable AD series, we've got just about everything covered. What's that? You want some scope type cards? No problem - have a look at the Spectrum series!
|
|
VisConnect 4-20 mA Analog Output Module
VisConnect is a stand-alone, analog/digital output hub that provides access to ViSmart-delivered data via a standard 4-20 mA output signal, allowing customers to acquire multiple channels of continuous viscosity and temperature data and integrate that data into any host control platform, without the use of expensive instrumentation.
The VisConnect has two loop-powered, galvanically isolated channels of 4-20 mA output, allowing customers to configure the minimum and maximum analog outputs to correlate to 4 mA and 20 mA, or optional 0.5V to 4.5V, respectively. With an optional 2 channel analog voltage output, standard communications protocol for industrial applications, the VisConnect can connect to any legacy DAQ or host control system. An RS232 Serial communication interface is present, and an optional CAN interface will be made available in the future.
|
|
PRODUCT RANGE GENERAL PRESENTATION
The electronic allows the vibration of the viscometer and processes the amplitude variations in order to deliver a linear viscosity response.
960X range
• Viscosity and temperature processor
• Density for kinematic viscosity measure (optional)
• Flush-type mounting
• 24 keys keyboard and graphic display
• User friendly utilisation
• Analogic current outputs 4-20mA, relays, RS 232 - RS 485
800x RANGE
• Viscosity controller
• Maximal process temperature 200°C or 300°C
• Flush-type mounting
• Analog output 4-20 mA
• RS 485 output
• Output relay (switching power 2A - 250VAC)
7000 RANGE
• Viscosity and temperature transmitter
• Maximal process temperature 100°C
• Mounting on standard DIN rail
• Analog output 4-20 mA
• RS 485 output
|
|
|
|
|
|
J724 Electrical-to-Optical Converter
http://www.highlandtechnology.com/DSS/J724DS.html
The J724 is a compact standalone electrical-to-optical converter. It accepts a digital logic level input and provides a fast fiber-coupled laser drive. Input threshold is user-settable from -4.0 to +5.0 volts, and termination is selectable to be 50 ohms or 1K.
J720 Electrical-to-Optical Converter & J730 Optical-to-Electrical Converter
http://www.highlandtechnology.com/DSS/J720DS.html
http://www.highlandtechnology.com/DSS/J730DS.html
The J720 is a compact signal-powered electrical-to-optical converter.
When used with a J730-1, the combination can transport a logic level or critical timing triggers over kilometer distances in high EMI environments with link jitter typically below 10 ps RMS. The J730 provides a digital logic output with risetime below 750 ps, and a fast analog (180 MHz bandwidth) output is also provided for monitoring link integrity.
J740 Fast Optical-to-Electrical Converter
http://www.highlandtechnology.com/DSS/J740DS.html
The J740 is a compact, amplified, DC-coupled linear single-channel optical-to-electrical converter that allows fast timing and logic-level signals to be transported via fiberoptic levels to take advantage of the superior speed, attenuation, and EMI characteristics of optical fiber.
J750 Wideband Amplifier
http://www.highlandtechnology.com/DSS/J750DS.html
The J750 is a self-contained DC-to-1 GHz amplifier. It is suitable for general-purpose instrumentation and has provision for loop-through (signal pickoff) and photodiode applications.
|
|
| ... products without technical information |
| |
Accepting the signal from our speed sensors and from a variety of transmitters with a pulse or AC-output. The unit provides alternative input paths for high level and low amplitude. Performance data easy programmed locally at the unit by incorporated keys.
Incorporated 2 speed alarms with SPDT relay contacts. Response characteristics individually programmable: setpoints, response characteristics and starting conditions.
Optional one 20 ma analog output with programmable span.
Signal frequency range 0 – 100 kHz.
Supply from 18-40 v or 85-265 v AC or DC.
Main design for snap-on-track, optionally in IP65 outdoor or ATEX Ex-proof enclosure.
|
|
Although modern machines are controlled centrally, complex installations often benefit from local fine-tuning and a display for operators to determine the machine status. JAQUET tachometers and speed switches are used in a wide variety of applications. Our extensive product line provides optimum solutions for both information and control.
Whether it's a digital tachometer, an analog indicator, a converter or a switch, you can rely on JAQUET for the right speed sensing equipment.
|
|
|
Frequency converters from 14 to 200 has - 42 V - 200 Hz for electric vibrating needles 42 V - 200 Hz
|
|
| ... products without technical information |
| |
|
Frequency converters from 14 to 200 has - 42 V - 200 Hz for electric vibrating needles 42 V - 200 Hz
|
|
| ... products without technical information |
| |
|
|
|
|
For over 35 years, LDS Nicolet has provided state-of-the-art data acquisition solutions for the test and measurement community. Today, we are the world's premier provider of out-of-the-box, ready to use systems for a diversity of physical and electrical applications. The Genesis system builds on a reputation of high performance acquisition and signal conditioning by providing a flexible, cost effective platform to meet all data acquisition and transient acquisition needs. With the Genesis, LDS Nicolet introduces the future of data acquisition.
Based on the concept of a mainframe with plug-in modules, the Genesis offers a wealth of capabilities. Up to 128 channels can be installed within a rack mainframe (56 channels in the portable tower mainframe), and multiple mainframes can be combined to an even larger system. Up to 400 MegaSample memory per board allows for high definition transient capture. Built-in data transfer acceleration gives you an overview of MegaSamples of data within seconds. With the world's best performance signal conditioning and 16-bit accuracy, Genesis is the right solution for your difficult measurement task.
Genesis Features
Combines Transient Recorder and Streaming Data Acquisition Capabilities
Programmable High-Performance Signal Conditioning
Sample Rates from
200 kS/s to 100 MS/s per Channel
Transient RAM to 400 MS per card, 12.8 GB per System Max.
Tower Mainframe with 7 slots or Rack Version with 16 slots (see lower picture)
Master Slave Option for Synchronized Acquisition on up to 1080 Channels
Unlimited Recording Size and Duration
IRIG and GPS Time Code Options
Local SCSI Drive Storage for Safety Critical Applications
|
|
|
|