|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
High Voltage Power Supplies - rugged, compact, reliable instruments for just about any high voltage application.
With up to 20 kV output capability, a GPIB computer interface, and 0.001 % voltage regulation, these high voltage power supplies have become the industry standard.
There are several models to choose from, with outputs ranging from 1.25 kV to 20 kV.
|
|
|
With the ability to accept worldwide ac input voltages using eight different ac input cords and worldwide safety agency approvals, the NP family is the top choice in rectifiers. The NP family consists of a wide variety of scalable 48V building blocks including the NP0800, NP1200, NP1500, and NP2500 and a 24V building block, the NP1300. The NP0800, NP1200 and the NP1500 are 2 RU tall, while the NP1300 and the NP12500 are 3 RU tall. The rectifiers and shelf are also NEBS approved. Rapid customization of the rectifiers is possible with the use of Network Protocol Cards (NPC). A complementary shelf is also available that holds up to three modules.
|
|
|
|
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
|
KSI offers cap charging power supplies tailored to meet your needs by configuring modular designs that are already very close to your exact requirements.
|
|
| ... products without technical information |
| |
Satellite Paste Applicators are designed to complement an existing heat source, such as furnace or induction. These freestanding units apply single, multiple, or "ring shape" paste deposits onto assemblies. Cycling is automatic and error-free with an operator removing the pasted part and loading it into the adjoining heat source.
Applicator guns can also be mounted to a robot to apply a detailed combination of paste dots and stripes to a particular part. After the pasting cycle, the part is joined to its companion members and fixtured to the subsequent heating and cooling sequence.
Dual station system utilizes rotating mandrel technique to apply 360° stripe of Fusion Paste onto part joint area.
|
|
SPECIAL
This product line gathers all automated or semi-automated systems, designed and built for complete or partial applications, on specific request for custom equipment, syandalone or integrated.
|
|
ECO
Micro-jet dosing systems for:
- lubro-cooling substances for processes like shearing, drawing, drilling, tapping, cutting, etc.
- lubrication of particular kinematic mechanisms and/or components
Products: lubricating oils, evaporable oils, cooling liquids, detaching fluids, protective coatings, etc
|
|
| ... products without technical information |
| |
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
| ... products without technical information |
| |
- Paper Packaging at Unrivaled Speeds
Creates custom-length paper pads at up to 150 per minute – making it the fastest paper system on the market
- Versatile
Can be used in a variety of packaging techniques, including cushioning and blocking and bracing
- Environmentally Responsible
TigerPad™ material contains 85% Post Industrial and 15% Post Consumer recovered fibers equaling 100% recycled fibers
Patented, single-motor design results in lower power consumptions than other paper systems
TigerPad™ material is lofted, strong and durable requiring less material to provide “more” protective packaging performance
- Dependable and Durable
Requires minimal service, which means greater uptime and a more profitable packaging operation
- Effortlessly Integrate into your Current Operation
Ideal for workstations – materials can be taken straight from the system or batched into bins. Smaller footprint is easy to position anywhere
|
|
PadPak Cushioning System
PadPak® is a versatile product that can accommodate most packaging needs and applications such as cushioning, wrapping and blocking and bracing.
PadPak converters create cushioning pads from single or multi-ply kraft paper. Inside the converter, the paper layers are crimped together, trapping air inside the layers to form a cushioning pad. PadPak converters vary in size and configuration to accommodate any packaging environment or application. PadPak is created through the PadPak® AutoPad® , PadPak Jr.® , PadPak® Pad-N-Pak® Workstation or PadPak LCTM converters.
AutoPad®
A HEAVYWEIGHT FOR CUSHIONING APPLICATIONS
Versatile - several modes of operation allow for batch production or in-line, just-in-time use for most cushioning applications
Adjustable - converter is easy to rotate and is height adjustable to adapt to packing environment needs
Adaptable - multiple stand options and various accessories and customizations available
|
|
|
|
|
|
Fillpak® Voidfill System
FillPak® is a patented voidfill system that converts kraft paper at a very high speed into an economical, clean alternative to other voidfill materials. Single-ply, fanfold kraft paper is converted into a PaperStar? configuration, which is geometrically the most effective way to fill a void. FillPak is created through FillPak®, FillPak TT®, and FillPak MTM converters.
FillPak: EXTREMELY FAST AND EFFICIENT VOIDFILL
Fast - top converting speed is 55 inches per second
Versatile - integrates easily into a voidfill or pick and pack operation
Economical - more cost effective than other voidfill materials
Efficient - seven packs of paper can be stacked, taped together and converted for maximum uptime and throughput
FillPak TT: VOIDFILL WHERE AND WHEN YOU NEED IT
Fast - converting speed is 60 inches per second
Compact - designed for companies with multiple packing stations
Adaptable - can be converted into a battery operated unit when electrical outlets are not available
Versatile - can be easily configured as a floor or a table stand
Lightweight - entire converter only weighs 55 lbs. making it easy to move around
FillPak M: GOOD THINGS COME IN SMALL PACKAGES
Compact - minimal area for setup and storage; ideal for low volume or indiviual pack station needs
Clean - paper packing material is neatly guided into the box without any overfilling or spillage
Quiet - no motor makes the unit appropriate for non-industrial settings
Innovative - Ranpak's patented fanfold paper eliminates the "drag" experienced when using paper rolls
|
|
The new Easypack Spiral Pro™ is a high-speed motor driven version of the Spiral system producing tubular lengths of cushion void fill packing on demand.
High volume output is controlled by a foot switch with the flexible cushion material dispensed straight into the transit box.
The small, neat machine takes up minimum space so that every packing bench can have its own dispenser.
- Produced from 100% recycled and biodegradable paper
- Provides effective all round protection for goods using top, bottom and side fill
- Flexible tubes are easy to shape and form
- The tubular material is readily coiled to support heavy items
- The dispenser is fully adjustable for height, tilt and swivel
|
|
Epsilon™ is a cost effective system producing flexible, shock absorbing void fill and protective cushions from 300m rolls of single ply, 100% recycled paper. It generates a high bulk pack using the minimum amount of material.
The Epsilon™ system is suitable for both low and high volume users. Cushions generated from 300m length rolls of single ply paper make loading easy, and extend the time interval between roll replacement.
- Resilient paper cushions provide ideal all round protection and shock absorbing void fill for goods of any shape, size and weight
- Costs reduced by use of longer rolls of single ply paper with no need for total fill
- Environmentally friendly 100% recycled paper is recyclable and biodegradable
- Sturdy, high quality packs maintain their shape and resist compression, ensuring safe transit of goods
- Recycled paper does not mark polished surfaces
- Neat, clean packaging is readily unpacked and liked by people receiving the goods
|
|
|
The Meech Model 904 is a constant voltage power supply, designed to provide a 7kV source for Meech AC ionising equipment. It is adjustable to operate at 100-120v or 200-240v input voltages and is available in either 50Hz and 60Hz versions to suit local conditions. The 904 utilises a modified shape of output wave form and is uniquely designed to allow automated manufacture for increased reliability and extended product life.
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
The Model 977v3 Pulsed DC Controller has been designed to operate with the full industrial range of Meech Pulsed DC static elimination equipment. It is light and compact but able to cope with the most technically demanding industrial applications. In addition to the ability to control power output, frequency and polarity, the 977v3 also offers alarm and remote monitoring and control functionality. A new feature of the 977v3 is an 8- way DIN for connection of an ion balance sensor and feedback system. Patent No. ZL200530000278.0
|
|
|
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
|
|
|
|
see the results for the following category : 
