|
|
|
|
|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program the 19" Euro Card with up to six different, galvanically isolated outputs with 6 or 8 TE. With the MTM Power Card of the series MPK1, an unexpected variety of possibilities can be created for 19" applications. Approx. 1.000 different power supply variations as
19" plug-in can be realised. As in a construction kit, the 19" power supplies can be individually assembled with the three basic components front plate, PCB and connector as well as the vacuum encapsulated modules of the series PMA, PMAS, PMN, PMG and PML. The MPK1 offers 2 mounting positions for PCB modules with an output power of 5 to 48 W, either with single, dual or triple outputs. The MPK2 has one mounting position for modules with an output power of 50 to 100 W and up to three outputs. With the MTM Power Card, power supply variations can be realised in seconds. If requested, a separate LED for each output can be included on the front plate. All modules with the same input voltage can be combined with each other. As customised power supplies have the same dimensions and pinning, even these can be combined with standard modules.
|
|
|
The MTM Power series PMA19 35 has been designed for the use in 19" racks. Due to the very slim case with only 4 TE, the PMA19 35 require very little space within the complete system. The devices have been designed as universal compact power supplies with input voltage ranges of 85...264 VAC and 80...375 VDC for worldwide application. The switching frequency is 80 kHz and they are equipped an internal fuse at the input. The nominal outputs of 5 V, 12 V, 24 V and 48 V are adjustable. Despite the compact design, the devices fulfill all common safety and EMI standards, are prepared for Class I and have a high efficiency. They are continuous short circuit and overload protected and optionally available with a power fail signal.
|
|
Open frame
- 3 or 4 output voltages
- VME bus signalling
- Fan monitoring
Power systems
- From 300 W to 1000 W output power
- (n + 1) redundancy
- Design in 3 U subrack
19"
- AC/DC switched mode power supply
- AC/DC linear control systems
- AC/DC converts
|
|
Absopulse's modular power systems are comprised of plug-in (Eurocard) converter and rectifier modules, and 19" and 23" shelves including motherboards and power distribution panels. These modular designs allow for easy servicing in the field.
Our modular systems offer:
- Output power up to 5kW per 19" shelf
- Almost any input/output and mechanical configuration
- N+1 redundant operation and hot-swap
- Multiple outputs
- Expandability - as power requirements increase, more modules can be added.
- Reconfiguration option
|
|
AC/DC power-supply units
The wide range of AC/DC power-supply systems supplied by
Zentro-Elektrik includes devices with one or several output voltages, switched mode or series-regulated devices, modular power-supply systems, including units with hot-swap features and a large selection of power-supply systems in general.
They can be used in various applications as individual devices or redundant system solution or even as battery chargers and DC UPS units.
|
|
Features :
- 1U low profile
- 19-inch rack mounting
- Control and monitor up to 3 RCP-1000 units
- Suitable for all kinds of RCP output (12V,24V.48V)
- Digital meters for output voltage, output current, and internal temperature on front panel
- Potential meter for adjusting output voltage of RCP-1000 unit on front panel
- Relay contacts and LED indicators for AC fail, DC fail, and over temperature warning
- Removable fixing accessory
- 3 years warranty
Description : RCP-MU is the monitoring and control unit used for the RCP-1000 series rack power. It can decode the l2C signal sent by RCP series and display through digital meters or relay contact signals. RCP-MU can also turn ON/OFF or trim the output voltage of RCP-1000 remotely that make the basic control more easily.
|
|
|
|
|
|
1U low profile 19" rack mount power solution consisting of 1 to 3 hot-swappable RCP-1000 units that, up to 3000W, can be provided in a single rack. Featuring active PFC and 10.67W/in2 extremely high power density. With the ability to provide rated output wattage even at 100VAC input, due to its high efficiency design, and three output voltage levels that can allow 12V@180A, 24V@120A, 48V@63A to be selected as the front end power configuration. The racks can also be paralleled together (up to 3 racks) for higher wattage output applications
* Universal AC input
* Built-in 5V/0.3A auxiliary power
* Built-in active PFC function, PF>0.96
* Short circuit, over load, over voltage & over temperature protections
* Forced air cooling by built-in DC fan with fan speed control
* Low profile:1U height
* Active current sharing up to 3000W (3 units)in 19" rack
* Remote control for single unit
* Built-in remote sense function
* Output voltage trimming function
* Hot-swap operation
* Optional I C serial data bus
* AC OK & DC OK signal
* Internal ORing diode
* Option of AC Inlet or Terminal block on Rack
|
|
|
Unipower Telecom's Radian Series are hot-swappable, modular rectifiers which produce up to 1200 watts output. There are 18 different models with different output voltages and power levels. The modules are ultra-compact with power density up to 17 watts per cubic inch.
|
|
AC/DC Power Supplies for 19-inch
Multiple output 60 - 300 watts
Plug-in Power Supplies for your 19-inch application.
|
|
Single output 60 - 360 watts
Plug-in Power Supplies for your 19-inch application.
AC / DC POWER SUPPLY
PRIMARY SWITCHED MODE
SINGLE OUTPUT
P 60 SERIES
– 19" plug-in module
– Wide range input 90 – 264 VAC
– Mains buffering 140 ms
– Power Fail signal
– Output permanent short-circuit proof and SELV according to EN 60950
– Overvoltage protection
|
|
|
A range of multi function products specifically designed to suit the requirements of all combined heat and power, co-generation, diesel and gas engine generator applications. This high quality product portfolio offers the generator set manufacturer and panel builder a flexible mix of contemporary and traditional products, including a comprehensive range of generator set controllers, integrated digital power metering, and a one stop solution package of measurement, protection and control instrumentation.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
