|
|
PS24V8AG-110 and PS42V6AG-110
• Enclosed linear unregulated power supplies
• PC-type AC power cord
• 4 pin AMP connector on output
• Internally fused on both primary and secondary side
• Toroid transformer for minimal voltage drop and minimal EMI
Includes 1, KITDC1- connector kits
SHUNT42V100W
• Provides protection against Back EMF
• Automatically gates on at >49 VDC
• 27 Ohm 100 Watt Resistance
• Connects in parallel with above enclosed power supplies
• Pin-out is same as enclosed power supplies
• Dimensions are same as enclosed power supplies
The SHUNT42V100W can be inserted between the DC power supply and the SmartMotor to monitor the power voltage. If the voltage exceeds the threshold, the shunt gates on to clamp the voltage to safe level.
This is designed for the 42V supplies but it can also be used for 24V supplies.
Includes 2, KITDC1- connector kits
Use with cable CBLDC1
|
|
IDEC switching power supplies offer worldwide approvals, universal voltage inputs, fused inputs, auto-resetting overload protection and two different styles.
DIN Rail Mount
PS5R Slim Line
30W, 60W, 90W and now 120W and 240W models are available in a slimmer footprint than traditional power supplies. UL508 listed and approved for Class I Div 2 hazardous locations. The new 120W and 240W also comply with SEMI F47 sag immunity requirements.
PS5R Standard
UL508 listed switching power supplies with worldwide approvals and convenient mounting with output capacities up to 240W.
Metal Frame
PS3L
Traditional metal-frame power supplies with worldwide approvals and output capacities up to 300W with 5, 12, 24VDC versions.
|
|
|
Eaton's 3G series of Powerware rectifiers were designed to meet the growing demands of our customers. Increased power density significantly reduces CAPEX requirements and space utilization. Improvements in system flexibility include horizontal and vertical mounting (solutions for space critical applications), universal AC inputs, and a high degree of scalability for changing future requirements. The 3G series of rectifiers are based on the design architecture of the previous generation of rectifiers to maintain the characteristics of extremely high reliability in the field. Long life, efficiency, and greater power density reduce environmental impact, as well as CAPEX and OPEX concerns.
|
|
|
|
|
|
RPS-30: DIN rail power supply for automation systems, in plastic cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-30:
- universal AC or DC input (full range),
- protections: short circuit, overload, overvoltage,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 100 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
RPS-120: DIN rail power supply for automation systems, in metal cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-120:
- AC input range selectable by switch,
- protections: short circuit, overload, overvoltage, overtemperature,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 55 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
Compliance with EMC standards:
- EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B,
- harmonic current: EN61000-3-2,-3,
- EMS immunity: EN61000-4-2,3, 4,5,6,8,11, ENV50204, EN55024,
EN61000-6-2, EN61204-3 Heavy industry level, criteria A.
|
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
|
|
DHP Series
480W Single Output DIN Rail Mount Power Supplies
- Single phase or Three phase input versions available
- Wide range AC input with power factor correction
- Designed for Rugged Industrial Applications
- Convection cooled
- Built in signals
- Three Year Warranty
Other Lambda Solutions
- DLP 75 to 240W Single output
- DPP 15 to 100W Single output
- DSP 10-100W Single output
- DLP-PU 20A Redundancy Module
- MC/MZ 6 to 30A Single & Three Phase EMI filters
|
|
The POWERTERM range of dc power supplies is specifically designed for industrial instrumentation applications. Use of carefully selected long-life components and conservative design parameters ensure increased reliability even in harsh conditions. Convenient DIN rail mounting and plug-in terminals on some models make these power supplies ideal for powering instrument panels
universal ac inputs 85-264Vac on all models
removable terminal blocks on most models for easy system maintenance
enclosed housings with protected terminals for safe mounting in serviceable areas
|
|
AC/DC Power Supplies up to 1000 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
AC/DC Power Supplies 15 - 250 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
AC/DC Power Supplies up to 500 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
AC/DC Power Supplies up to 2000 watts
Single output
Your compact Power Supplies for wall mounting.
|
|
|
The DeviceNet protocol dramatically reduces costs by integrating up to 62 devices on a 4-wire trunk network. Communications data is carried over two wires with a second pair of wires carrying power. Discrete and analog devices may be connected into the DeviceNet protocol.
|
|
|
AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts.
|
|
ULTRA-COMPACT 1U x 2U FRONT ENDS / RECTIFIERS
UP TO 650W OUTPUT WITH HOT-SWAP
FEATURES:
- Front End or Rectifier Versions
- 5V, 100mA Standby Output
- Hot-Swap or Chassis Mount
- Dual A/B AC Inputs
- Dual A/B DC Outputs
- 12, 24 or 48 VDC Outputs
- Class B Conducted EMI
- DC Good LED
- I²C Serial Data Bus Option
- Up to 9.5 Watts/Cubic Inch
- 1U x 2U Profile: 1.6 x 3.3 Inches
- Staged Pin Engagement
- ORing Diode on Output
- 19" Rack/Shelf Holds 4 Units
- Active Current Sharing
- Universal 85 to 264VAC Input
- SEMI F47 Compliant at Hi-Line
|
|
240, 600, 1200 W, Industrial, Prepared for N+1 Fault Tolerant operation
DC power supply
High quality Industrial Power Supplies
Built-in series diode and undervoltage alarm circuit, for use in N+1 Fault Tolerant (redundant) systems
Very reliable, MTBF 500 000 - 1 000 000
Protected against all overload and short circuit conditions
CE
|
|
|
The Series D100 DC Dual Output Power Supply is designed to deliver a highly regulated voltage. This supply is ideal for transducers that require a regulated DC voltage for operation, and can also be used where a dual supply is required, such as with the Series 1000 O/D or Model 605 ADT.
|
|
The fleXPower range allows for simple configuration of a custom modular power supply with up to fourteen outputs. The chassis consists
of either ten, twelve or fourteen slots, and modules are either two or three
slots wide.
- 400-2400 Watts
- Industrial/IT & Medical Approvals
- Configurable for Fast Time to Market
- SEMI F47 Compliant
- Flexible Series & Parallel Capability
- Output Voltages up to 150 VDC
|
|
Features:
- Output Modify Range:3V~200VDC
- Full documentation for safety application available (Please contact us for details.)
- RoHS Report
- ISO 9001:2000 TUV Certification
- Part Number Rule
- Split rail, Series, and Parallel, Redundant use, and Remote sensor connection circuit
- Additional services provided for your convenience.
- In house test facility for EMI and RoHS F.O.C!!
|
|
- Worldwide Medical Approvals
- Single, Dual, Triple and Quad Outputs
- Small Size - Only 7" x 4" x 1.5"
- Power Fail Detect & Remote On/Off
- Universal AC Input with Active PFC
- High Reliability - 350k Hours MTBF
- 100 Watt Convection-Cooled Rati
|
|
Active Power Factor Correction EN61000-3-2 Harmonic Compliance Active AC Inrush Control 2U X 3U Form Factor 7.5" Long 12.6 / in3 +12VDC Output
+3.3VDC Stand-By Hot Plug Operation N + 1 Redundant Internal OR'ing Fets Main & Stand-By Active Current Sharing Built-in Cooling Fans (60mm x 38mm) I2C Communication Interface Bus EERPOM for FRU Data Green LED Status, Power OK Amber LED Status, Power Failed Internal Fan Speed Control Fan Failure Output Signal INTEL, SSI Std Logic Timing INTEL, SSI Std. FRU Data Format AC Shutdown <85VAC or 170VAC
|
|
|
|
|
|
Enterprise Network Power Solutions
3G Enterprise Power Solutions - EPS2 Series
Eaton 3G Enterprise Power Solutions (EPS) offer high density and highly configurable, advanced power protection for IT network/wiring closets, communications/VOIP/PoE network systems, low powered telecommunications, and other mission-critical applications.
Data Power Solutions
The Eaton Data-Voice- Video Power Solutions range of DC power systems is designed for telecommunications network applications requiring compact, efficient and flexible DC power supplies.
3G Enterprise Power Solutions - EPS5 Series
Eaton 3G Enterprise Power Solutions (EPS) offer high density and highly configurable, advanced power protection for IT network/wiring closets, communications/VOIP/PoE network systems, low powered telecommunication, and other mission-critical applications.
Enterprise Extended Battery Module
The Eaton Enterprise Extended Battery Module (EBM) is designed as an optional integrated backup power source to the 3G Enterprise Power Systems, providing secure power during AC grid failure for anything from orderly shutdowns through to extended runtimes for continuity of service. Multiple battery modules can be connected together to achieve increased backup capacity for a given output demand.
|
|
Eaton APR48-3G Access Power Rectifiers are designed specifically for network access applications such as cellular base stations, customer premises equipment and road-side cabinet installations.
The new generation 3G architecture of the APR48-3G Access Power Rectifier has improved space utilisation so rack space can be maximised for use with telco equipment and not power equipment. The APR48-3G size has been reduced by approximately 50% with an increase of power output by 20%, over the previous model. This more than two-fold increase in its power density allows as little as 2U of rack space to be occupied by power.
Operating with the Eaton SC100 or SC200 series of system controllers, the APR48-3G rectifier modules will provide years of cost-effective, and trouble free service for your 48V network access equipment.
|
|
|
|
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
Open Frame Switching Power Supply
Caracteristics
- Open frame switch-mode power supplies which can be manufactured with different features according to the technical needs of the buyer
- Comelit carries out the design of the circuit, technical testing and the attainment of approval certification
|
|
Condor has a broad range of products for OEM industrial and instrument applications with power levels from 6 to 6000 watts. Our line of commercial products are available in standard, modified and custom configurations. We've successfully designed the power for many products for over 25 years including: elevator controls, test equipment, laboratory instruments, embroidery machines, document feeders, engraving equipment, and money order dispensers.
|
|
|
|
