|
|
|
Operating as a constant voltage power supply, the 105 is very simple to use. The adjustment knob and hi–lo range switch control the output, which is variable in 10-volt increments from 20 to 250 volts. One, two-position switch toggles the bright LED display from indicating output voltage to output current. The 105 is equipped with an over current detector for maximum safety. Like all Thermo products, the 105 is protected by our four-year warranty.
|
|
|
|
|
|
CPC6314 325W DC Power Supply with IPMI Management
The CPC6314 Hot-Swap DC Power Supply, part of our Advanced Managed PlatformTM product offering, combines high power capacity with standards-based IPMI management capability and a reliable, modular package to become the power supply of choice for systems requiring DC power input. This CompactPCI® 3U x 8HP form factor supply is ideally suited for telecommunications, industrial automation and a variety of embedded computer applications where redundancy and hot-swap are required.
The input voltage range is -36 to -72V DC. Four outputs are capable of providing a total of 325W for +3.3V DC, 5V DC and ±12V DC with independent output regulation. This supply implements management functions such as system control, monitoring and status reporting through an IPMI-based intelligent communications bus. The CPC6314, meets the electrical and mechanical requirements of the PICMG® specification for CompactPCI systems. It uses a 47-pin Positronic power connector to provide efficient, effective, high current DC connectivity and is UL, CSA, IEC recognized TUV CB Certificate and CE Marked.
The CPC6303 250W Hot-Swap Power Supply is available as an AC alternative.
Highlights
325W output power
Hot-swap, N 1 load sharing
47-pin input/output connector
Protection features
Input fusing
Input reverse polarity
Overvoltage
Overcurrent/short circuit-auto recovery, all outputs
Overtemperature warning and shutdown
Fault isolation
IPMI-compliant system management functions
Status LEDs-fault, input OK
Status output signals-(DEG#), (FAL#)
Main output remote sense ( 3.3V, 5V, 12V)
Built-in EMI filter
Eurorack-compatible module
Injector/ejector handle
|
|
|
|
|
|
MicroTCA Power Modules :
Emerson Network Power's MTC600 series power modules provide a compact self-contained power solution for MicroTCA systems. The modules can support shelves, cubes and other system implementations, and are fully compliant with the PICMG MicroTCA.0 Revision 1.0 specification.
Rated at 600 watts output power, MTC600 power modules implement all the incoming power conversion, power management and power protection functionality necessary for supplying a fully populated MicroTCA system.
MTC600 MicroTCA power modules are available in dc-input and ac-input versions. The ac-input version has the following key attributes:
- Compact, high power-density, single-width 12 HP high module
- 90 to 264 Vac input, suitable for use with single-phase supplies virtually anywhere in the world
- 16 output channels, each capable of delivering 12 V @ 7.6 A payload power & 3.3 V @ 150 mA management power
- Provides sufficient power for 12 AdvancedMCs, 2 MicroTCA Carrier Hubs and 2 Cooling Units
- Supports N+1 output redundancy and hot-swap operation
|
|
Our products are listed in two sections reflecting the characteristics of the modules. The two sections cover DC/DC Converters and DC/DC Regulators Point of Load.DC/DC Converters are designed for standard telecom input voltage ranges and industrial input voltage ranges spanning from 9-75 Vdc. These products are generally isolated between input and output and are tested with 1500 Volts or more.
DC/DC Regulators - Point of Load use input voltages up to 16 Vdc and are generally used as point-of-load power supplies.
|
|
• 80 Watts
• 1-3 Outputs
• Medical Approvals
• Both Line and Neutral Fused
• Low Leakage Current
• 4000 VAC Isolation
|
|
Power Supply module NT250
- Power supply of modules via backplane
- Supply voltage: 18 .. 34 VDC
- Monitoring of supply voltage
- Power-fail signal for processor module
- Galvanic isolation
- Output power: 45 W
- Buffer time: 10 ms
|
|
With focus on the industrial and traction inverter market the PrimePACK™ IGBT Module is the new trendsetter in the power range up to several megawatts. Also for renewable energies and commercial agriculture vehicles (CAV) the PrimePACK™ module match to highest reliability and lifetime demand. Intelligent chip layout and well-engineered busbar construction offers a smart solution with optimized heat spread and lowest stray inductance. Due to slim shape of the module baseplate a reduced cooling area is needed. Latest mounting technologie of the PrimePACK™ IGBT Module allows automized assembly steps which reduce the system costs significant.
Our contribution to your success at the glance:
* Improved thermal properties
* Low stray inductance
* Wide range of operating temperatures
* Integrated NTC with high isolation
* 600A/1200V-modules with SiC-Diodes and fast-switching IGBT2 available
|
|
SPH1013 and SPH500 power supplies with 72V
Our new, robust and highly-efficient DC-Power Super Slim power supplies improve the performance of your drive applications. Use the parallel switching facility offered by these modules to boost output.
SPH1013-4821 + SPH1013-7214
* Input: 3 x 340 - 550VAC
* 1000 watts - Output: 48V + 72V
* Power Boost up to 200 %
* Parallel switchable with back feeding voltage
* wall or DIN-rail mountable
* 24V model also available
|
|
|
|
|
|
Characteristics
DC Power Supplies R&S NGSM are versatile supply and measuring units for testing electronic car components by simulating real operating conditions. In addition to a wide field of car electronics, it can be used in mobile radio, car hifi applications and mechanical engineering. Due to its compact design, the units take up only one half 19" width. A 19" adapter is available for mounting the R&S NGSM into test racks.
Application-specific characteristics
Car electronics
R&S NGSM is a precise and, thanks to its versatility, an extremely economical tool for use in the production of electronics. With the aid of an IEC/IEEE bus or RS-232-C interface (optional), the power supply can readily be integrated into in-line production systems. The startup curve in line with DIN40839 can be adapted to other factory standards by reprogramming it. High surge currents typically occur in applications such as central lock-ing or ABS, but with a pulse current of up to 30 A, R&S NGSM32/10 is ideally prepared for these applications.
Mobile radio systems
The high resolution for current measurements allows the maximum operating time of a mobile phone to be accurately predicted; typical voltage drops during the startup of a car - which have to be tolarated by telephones operated at a car net can be simulated.
DC Power Supply R&S NGSM is insensitive to the RF voltage conducted from a device under test or radiated from a nearby antenna.
|
|
|
Power Management IC solutions ranging from standard ICs to high performance plug-in, power brick, digital power and integrated power modules.
|
|
|
|
|
|
The modular AMKASYN servo inverter series KE/ KW consists of a compact supply module (KE) and different compact inverter modules (KW) in various power ranges.
Features:
- Power range up to 120 kVA
- Modular design
- Nearly limitless module arrangement
- Number of servo axes at a supply module is limited only by total power
- Cooling with coldplate technology
- Regenerative feedback optional
- Variable encoder technology standard encoder inputs for resolver, square or sine-wave encoder, EnDat, Hiperface pulse forwarding
- Multifunctional networking via powerful ACC bus
- PLC functionality optional
- Fieldbuses:
- SERCOS
- Profibus DP
- CAN
- EtherCAT
The most important advantages at a glance:
- Reduction of control cabinet space through compact devices
- Cost savings through possible integration of control cabinet in machine
- Cost-optimized solutions through modular system design
- Complex networked machines possible through precise synchronization
- Simple implementation of motion control functions through integrated PLC
- Integrated safety functions to category 4
|
|
Model ORION-D4602P
460W+460W mini-redundant switching power supply with active PFC
Mini-redundant power supply suitable for 2U/4U and larger chassis
Active PFC, full-range input
Two independent AC inputs
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power connector for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-A4001
400W 1U ATX power supply with active PFC
Low profile power supply suitable for 1U and node chassis
Active PFC, full-range input
Support for dual Intel® Xeon™ processors
Total output of +5V and +3.3V is 50A
Max. +5V standby output is 2A
|
|
Performance:
The high-quality design of Comdel's XDC 1000 assures ultra reliability, while the small size fits easily into your system. What's more, with the XDC's flexible options and controls, you don't need to purchase a new power supply every time you make a change in your system. Current and voltage control capabilities are standard with each supply.
Applications:
Comdel's XDC is the ideal supply for reactive PVD sputtering, DC Bias and hard-coating applications.
Features:
Compact, lightweight, 3 1/2" rack-mount DC generator
Accurate output control by voltage or current
Self-limiting circuitry that eliminates short-circuit failures
Low stored energy that reduces arc damage
Front Panel, continuously variable control of output voltage and current
Calculated MTBF: 30,000 hrs. minimum
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
Single Phase Power Supplies
Based on the experience we have built over the past 30 years, we are offering a wide range of power supplies which provide many features to meet customer requirements. We have compact standard Power Supplies and as well versions with display, which provide additional information such as maintenance forecast monitoring, or total run time, both with under-voltage alarm. The slim housing features two under-voltage alarms which indicate lifetime. Last but not least, we offer our modular power supply with multiple configurations and features.
Three Phase
The 3-phase power supplies are available from 120W up to 960W at 24VDC. The key features of this family are the slim and compact housing and its high efficiency. All with natural ventilation.
|
|
|
Eaton has an extensive line-up of 24VDC switch mode power supplies to fit almost any application. Available with a variety of features including DIN rail and panel mount, Class 1 Divison 2 ratings, parallel capabilities, and many others. Choose from the basic and inexpensive ELC power supplies, the general purpose & heavy-duty industrial PSG series, or the high current boost (outrush) and feature-rich PSS series.
|
|
TELE is your reliable source of DC power
TELE offers you a wide range of power supplies with a variety of voltages and functions together with very high efficiency, covering compact DC supplies, installation-type units and regulated switch-mode power supplies. The regulated switch-mode power supplies provide a wide input voltage range and electronic short-circuit protection against overloading.
|
|
|
With the ability to accept worldwide ac input voltages using eight different ac input cords and worldwide safety agency approvals, the NP family is the top choice in rectifiers. The NP family consists of a wide variety of scalable 48V building blocks including the NP0800, NP1200, NP1500, and NP2500 and a 24V building block, the NP1300. The NP0800, NP1200 and the NP1500 are 2 RU tall, while the NP1300 and the NP12500 are 3 RU tall. The rectifiers and shelf are also NEBS approved. Rapid customization of the rectifiers is possible with the use of Network Protocol Cards (NPC). A complementary shelf is also available that holds up to three modules.
|
|
PS24V8AG-110 and PS42V6AG-110
• Enclosed linear unregulated power supplies
• PC-type AC power cord
• 4 pin AMP connector on output
• Internally fused on both primary and secondary side
• Toroid transformer for minimal voltage drop and minimal EMI
Includes 1, KITDC1- connector kits
SHUNT42V100W
• Provides protection against Back EMF
• Automatically gates on at >49 VDC
• 27 Ohm 100 Watt Resistance
• Connects in parallel with above enclosed power supplies
• Pin-out is same as enclosed power supplies
• Dimensions are same as enclosed power supplies
The SHUNT42V100W can be inserted between the DC power supply and the SmartMotor to monitor the power voltage. If the voltage exceeds the threshold, the shunt gates on to clamp the voltage to safe level.
This is designed for the 42V supplies but it can also be used for 24V supplies.
Includes 2, KITDC1- connector kits
Use with cable CBLDC1
|
|
IDEC switching power supplies offer worldwide approvals, universal voltage inputs, fused inputs, auto-resetting overload protection and two different styles.
DIN Rail Mount
PS5R Slim Line
30W, 60W, 90W and now 120W and 240W models are available in a slimmer footprint than traditional power supplies. UL508 listed and approved for Class I Div 2 hazardous locations. The new 120W and 240W also comply with SEMI F47 sag immunity requirements.
PS5R Standard
UL508 listed switching power supplies with worldwide approvals and convenient mounting with output capacities up to 240W.
Metal Frame
PS3L
Traditional metal-frame power supplies with worldwide approvals and output capacities up to 300W with 5, 12, 24VDC versions.
|
|
|
Eaton's 3G series of Powerware rectifiers were designed to meet the growing demands of our customers. Increased power density significantly reduces CAPEX requirements and space utilization. Improvements in system flexibility include horizontal and vertical mounting (solutions for space critical applications), universal AC inputs, and a high degree of scalability for changing future requirements. The 3G series of rectifiers are based on the design architecture of the previous generation of rectifiers to maintain the characteristics of extremely high reliability in the field. Long life, efficiency, and greater power density reduce environmental impact, as well as CAPEX and OPEX concerns.
|
|
Features:
- NTS500 Series WebSheet
- Total Max Power: 500 W
- Input Voltage: 85 V to 246 V
- Output Voltage: 12 V to 48 V
- Outputs: Single
- Size (L x W x H): 7.000" x 4.000" x 1.500"
- Warranty: 2 years
- Operating Temperature: 0 to 50C
Special features:
- Active power factor correction
- IEC EN61000-3-2 compliance
- Remote sense
- Power fail and remote inhibit
- Optional fan cover (-CF suffix)
- PM Bus compliant
- Digital I2C interface
- 2 year warranty
- Single wire current sharing
- Built-in EMI filter
- Low output ripple
- 5V standby
- 12V fan output
- Overvoltage protection
- Overload protection
- Thermal overload protection
- DC power good
- Built in OR-ing diode / FET
- POE Isolation on the NTS508
|
|
iVS series ac-dc power supplies
Emerson Network Power's iVS™ series of modular ac-dc power supplies is very similar to the VS series, but provides increased output power and functionality. Customers are now able to configure power supplies with up to 4,860 watts output capability, and to monitor and control many attributes of the power supply via I2C. The series offers 7 types of modules, including single, dual and triple output units, with individual power outputs of up to 1,500 watts. The iVS™ series offers 25 standard output voltages, from 2 Vdc to 60 Vdc, and can provide up to 24 outputs.
|
|
|
|
|
|
RPS-30: DIN rail power supply for automation systems, in plastic cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-30:
- universal AC or DC input (full range),
- protections: short circuit, overload, overvoltage,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 100 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
RPS-120: DIN rail power supply for automation systems, in metal cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-120:
- AC input range selectable by switch,
- protections: short circuit, overload, overvoltage, overtemperature,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 55 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
Compliance with EMC standards:
- EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B,
- harmonic current: EN61000-3-2,-3,
- EMS immunity: EN61000-4-2,3, 4,5,6,8,11, ENV50204, EN55024,
EN61000-6-2, EN61204-3 Heavy industry level, criteria A.
|
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
|
|
DHP Series
480W Single Output DIN Rail Mount Power Supplies
- Single phase or Three phase input versions available
- Wide range AC input with power factor correction
- Designed for Rugged Industrial Applications
- Convection cooled
- Built in signals
- Three Year Warranty
Other Lambda Solutions
- DLP 75 to 240W Single output
- DPP 15 to 100W Single output
- DSP 10-100W Single output
- DLP-PU 20A Redundancy Module
- MC/MZ 6 to 30A Single & Three Phase EMI filters
|
|
The POWERTERM range of dc power supplies is specifically designed for industrial instrumentation applications. Use of carefully selected long-life components and conservative design parameters ensure increased reliability even in harsh conditions. Convenient DIN rail mounting and plug-in terminals on some models make these power supplies ideal for powering instrument panels
universal ac inputs 85-264Vac on all models
removable terminal blocks on most models for easy system maintenance
enclosed housings with protected terminals for safe mounting in serviceable areas
|
|
AC/DC Power Supplies up to 1000 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
AC/DC Power Supplies up to 500 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
|
|
