|
|
POWERDRIVE: Variable speed Drive - 45 to 1300 kW
Motor control :
- U/F Induction mode
- Open loop vector control mode
- Close loop vector control mode
- Synchronous
Main supply :
- Three phases 400 V - 45 up to 900 kW
- Three phases 525 V - 160 up to 1300 kW
|
|
T-T Electric proposes a series of Titan Drives with a power range of 0,75 to 300 kW for the wall-mounted version and 400 to 800 kW for the stand-alone cabinet version.
Titan Drive includes numerous functions as standard in order to precisely meet all application requirements.
4 controls in 1 drive - the ultimate drive for all applications:
1 Standard V/f control
2 V/F control with PG feefback
3 Sensorless flux vector control
4 Flux vector current control with PG feedback
TITAN Drive can be applied to a wide range of applications from servo-like precision machinery to multiple motor drives.
|
|
|
|
|
|
SINAMICS GL150
The rugged converter for synchronous motors up to 75 MW
The LCI-converter (load commutated inverter) SINAMICS GL150 extends the SINAMICS drive family to highest power ratings.
SINAMICS GL150 is designed as a drive converter for single-motor applications with variable and constant torque characteristic. The converter is available in air- and water-cooled design and achieves power ratings up to 74 MW (water-cooled design). Higher ratings are available on request.
SINAMICS GL150 is used for speed-variable operation as well as for start-up operation of large synchronous motors and generators. The typical speed range extends up to approx. 6000 rpm. When used as start-up converter the speed-range is limited by the synchronous line frequency. Within this range a speed control range of 1:10 or 1:100 can be realized. Due to the topology regenerative (4Q) operation is possible without additional measures. The drive converters SINAMICS GL150 drive converters offer an economical drive solution for highest power ratings of 74 MW and beyond, which can be adapted to specific customer needs with a wide range of optionally available components and accessories.
|
|
Variable speed transmission assembled on engine: TECHNOVAR.
the TECHNOVAR is a frequency converter which adapts on all the standardized standard engines. It is fixed on the top, side ventilator to be cooled. Simple to implement, it allows a variation speed to obtain a flow with constant pressure or a variable pressure with constant flow with a high degree of accuracy of adjustment. The parameter setting is easy and the visualization of the data is done locally on screen with liquid crystals. Very useful to optimize the operation of the centrifugal pumps with substantial energy saving on the installations of overpressure, treatment of water, heating, air-conditioning or of systems of filtration or opposite osmosis.
Range of power:
- On engine up to 22 kw.
- In mural version up to 45 kw.
Available in all the current tensions and frequencies.
|
|
ARIDYNE®2 is Emerson Motor Technologies’/USEM’s new rugged yet simple to setup range of Sensorless Vector Drives. With our 100+ years of motor design and manufacturing experience, who better to trust with your VFD requirements! We understand motor system performance and reliability better than anyone and have put that knowledge into bringing you this friendly yet powerful AC drive – the VARIDYNE®2.
Applications: Ideal for Pumps, Blowers, Conveyors, Mixers, and much more
Operating Environment:
* Ambient temperature -10°C to 40°C
* Electromagnetic Immunity complies with EN61800-3, EN61000-6-1 and EN61000-6-2
* Humidity 95% maximum (non-condensing)
* Electromagnetic Emissions complies with EN61800-3 (second environment) as standard.
* Complies with (with optional footprint EMC filter) EN61000-6-3 (residential) and EN61000-6(industrial) generic.
|
|
|
The variator alternative course PowerFlex 4 is smallest of the Powerflex range. It is a powerful variator of frequency while remaining of an obstruction very compact. With a response time very court of the digital entries, this variator answers the majority of the requirements in order for engines. All these variators are delivered with a guide of the multilingual user and a CD-ROM of reference.
|
|
| ... products without technical information |
| |
... see all the products in the category
AC drives
|
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float.
|
|
STALL TORQUE:
10 to 600 Nm
POLARITY:
12, 24, 30 poles
RATED SPEED:
200 - 300 - 400 - 500 - 1000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
high torque density and high performance
CE certification
cURus certification
OPTIONS:
feedback by encoder/resolver (Heidenain, Stegmann, Tamagawa)
hollow shaft
frameless
water cooled
|
|
H-modyn: Individual drive solutions for application and industry sector-specific customer requirements
The H-modyn machines for induction motors, synchronous motors and generators are suitable for use in the whole of the process industry. Either Oil & Gas, Offshore, Chemical, Steel, Water or Wastewater, Air separation, Pulp & Paper, or others - every branch will find the right machine.
In these industry sectors, with a high power requirement, these machines are preferably used for the following applications:
* Compressors
* Pumps
* Generators
* Refiners
* Blowers
and more
|
|
HT-direct motors are permanent-magnet synchronous motors that can provide high torques at low speeds directly at the driven machine. High efficiencies and good power factors can also be achieved at low speeds as a result of the permanent magnet rotors.
The HT-direct motors are offered as a harmonized system together with SINAMICS drive converters.
The HT-direct motor / SINAMICS drive converter represents a drive solution with a long service lifetime but with low lifecycle costs and high efficiency for applications with low operating speeds.
|
|
| ... products without technical information |
| |
|
The megatorque motor ps series delivers unprecedented performance , including a maximum rotational speed of 10 and position sensor
|
|
Mounting size: 60mm, 80mm and 90mm
Output power: 20, 40 and 90W
Speed range: 100 - 2000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-230V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type.
|
|
FAST-BACK 75 ® (& size 100) (New)
Brushless drive+motor, all-in-one fully digital. Torque range from 1.1 to 7.5 Nm. 220 VAC power supply. Motion controller with CAN BUS fieldbus interface.
Integrated motor in a fashionable design. The decentralized structure gives you much more freedom in designing your machine’s installation layout. Commissioning and service are much simpler. Many advantages such as cables and control cabinet space reduction. EMC line filter suppression and dumping circuit are integrated.
|
|
The TORQUECHAMPION® direct drive system is the new highly dynamic drive system from LTi DRiVES for precise, fast and maintenance-free positioning.
* Its short length and lack of gearing means it takes up a minimal amount of space.
* The peak torque of the MIC motor is available up to the maximum speed, making positioning faster.
* The hollow shaft permits simple feed-through of cables, hoses or laser beams through the motor.
* The integrated measurement system with 8,388,608 increments per revolution and single-turn absolute information means no reference running is required.
* The MTC motor is an external-rotor motor. It can be coupled with a high degree of torsional rigidity without gearing directly to the mechanism. This means it has no gear play and suffers no wear, needs to maintenance and offers very high drive dynamics.
|
|
milling spindle
with three-phase motor or synchronous motor drive
No refrigeration needed
Attachment of the spindle unit with housing, flange Pinole
Rugged construction with hardened and ground spindle
Tool fixture SK40, HSK63
Speed range up to 6,000 rpm
Drive power to 27kW
Spindle bearing inner diameter 70mm
Labyrinth seal with sealing air connection
Automatic tool change with hydraulic actuation possible
Internal coolant supply or minimum quantity lubrication possible
|
|
General Description
The FAN8434 is a camcorder one-chip motor driver IC. It is composed of capstan motor driver , drum motor driver and loading motor driver
Features :
* Capstan motor drive block
- 3-phase, linear BLDC motor driver with 3 hall sensors.
- Built-in FG amplifier.
- Forward and reverse rotation function.
- Built-in amplitude limiter.
* Drum motor drive block
- 3-phase soft commutating sensor less drive method.
- Built-in FG amplifier.
- Built-in PG amplifier.
* Loading motor drive block
- Single phase H-bridge driving method.
- 4-mode selection function(forward, reverse,
brake,standby).
* Common block
- Built-in TSD(thermal shut down)
- Built-in 4-normal op-amp.
|
|
|
The PIC-SERVO SC Motion Control Chip is a complete servo motion control system based on the PIC18F2331 microcontroller. It executes all of the real time processes (PID servo filter, motion profiling, commutation, error monitoring, communications) needed for controlling your motor. The simple serial NMC communications protocol lets you easily connect your microcontroller or PC host computer to multiple controller chips.
|
|
MSK offers a large selection of high performance parts for driving or controlling motors. From simple, compact bridges to complete brushless DC torque amplifiers. Our high performance, high reliability products are used on such critical applications as the gimbal drive for the PAC-3 (Patriot Advanced Capability 3) Missile's millimeter wave radar and the thermal imager on the Bradley Fighting Vehicle. Other programs include the steerable antenna on the Predator and Global Hawk UAV's, and many more.
- Output Current from 5 Amps to 600 Amps
- Supply Voltage Range from 55 Volts to 1200 Volts
- Both Hermetic and Plastic Encapsulated Modules (PEM) available
- Fully Isolated Versions Available
|
|
Integrated Circuits
Trinamic offers comprehensive IC solutions to control and drive electric motors. We focus on developing Application Specific Standard Products (ASSPs) for motion control. These dedicated ICs offer an economic approach to time critical motion control tasks thus lowering total system cost.
Extensive experience in IC design and drive technology enables us to effectively serve our customers. Our applications range from high volume automotive and computer peripherals to industrial embedded systems.
|
|
HVICs
* General Purpose ICs
* Single Driver ICs - High Side
* Single Driver ICs - Low Side
* Dual Driver ICs - Low Side
* Dual Driver ICs - Independent Low and High Side
* Dual Driver ICs - Half Bridge
* 3-Phase Driver ICs - Independent Low and High Side
* 3-Phase AC Motor Controller ICs
|
|
|
|
|
|
TMC454
Description
1-axis stepper motion controller with S-ramps and encoder feedback
The TMC454 is the direct successor of the TMC453 and is 100% software compatible.
The TMC454 is a high-end motor controller for all common 2-, 3-, and 5-phase stepper motors. It provides encoder feedback for high reliability or high position resolution drives. A large set of motion control features is included on this IC. The various function blocks are hardwired and „ready-to-use“. All processes can be serialized using the instruction based interface. A complete linear & S-shaped ramp generation unit is integrated within the TMC454. All dynamic parameters can be adjusted for a given application in a very broad range. The CPU is relieved from all time critical tasks like ramp calculation or microstep generation. Thus CPU and software engineer can focus on higher level motion control
jobs. In many applications, the TMC454 reduces the time time-to-market, and it saves costs for software development and hardware engineering. The TMC454 turns stepper motors into easy to use peripherals!
The TMC454 is upwards function compatible to its predecessor TMC453.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
