|
|
GE Motor Control Centers Serve Many Applications
Our low voltage and medium voltage motor control centers are suitable for applications such as pulp and paper, mining and metals, utility, chemical, oil and gas, mass-production manufacturing, and water & waste water. Since 1940, GE motor control centers have been designed and manufactured with demanding applications like this in mind. Our MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards. |
|
Spectra Series 8000 Line
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads. In many facilities today, these motor loads often are precision HVAC systems responsible for cooling sensitive electronic equipment - servers, routers, switches, pc's, etc. Any power outage or fault event could severely damage this equipment and ultimately bring all operations to a halt - resulting in huge financial losses.
Since 1940, GE Motor control centers have been designed and manufactured with demanding applications like this in mind. Built using Six Sigma quality guidelines, GE MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards. |
|
... see all the products in the category
AC drives
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 30Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 110/115V AC or 220/230V AC
Marking: CE, UL and cUL
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 20Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 200 - 230V AC or 100 - 115V AC
Marking: CE, UL and cUL |
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 6.3Nm
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
Microstep driver.
Also available with electromagnetic brake.
Low noise and low vibration.
Driver with vibration control circuit to dramatically reduce vibration over the whole speed range.
Energy-saving mode (only with electromagnetic brake).
Geared type
Mounting size: 60mm - 90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 0.35Nm - 12Nm, backlash 0.167° - 0.75°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 0.8Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 200 - 230V AC
Marking: CE, UL and cUL |
|
• Integrated Bipolar 1.8° Step Motor with Driver/Controller
• NEMA Size 17 Frame
• Holding Torque of up to 85 oz-in
• Input voltage of 7 to 28 VDC
• Output currents of 0.1 to 1.5 Amps Peak
• Step resolution of full step, 2x, 4x, 8x, and 16x microstepping
• Maximum speed of 250 kHz
• Up to 16 MHz of Step Clock Frequency
• Two digital limit switches, left and right
• One general purpose input (digital or analog)
• One open collector output capable of outputting 100mA
• Low power dissipation – no heat sink required
• Stand alone operation with no connection to PC
• Incorporated with TMCL Programming Language
• Up to 16 kBytes of Memory (2048 TMCL commands)
• Programmable settings for acceleration and velocity profiles
• Control commands such as Jump and Subroutines available
• Calculation and compare commands implemented
• StallGuard™ feature available
– capable of detecting a stall without encoder
• RS485 communication
• 3 stack lengths available |
|
Power supply: 24 V DC
Marking: CE, cUL
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
High-Torque type
Mounting size: 20, 28 and 42 mm
Max. permissible torque: up to 0.42 Nm
High-Resolution type
Mounting size: 28, 42 and 60 mm
Max. permissible torque: up to 2.3 Nm
Geared types:
Taper hobbed gear: max. holding torque up to 4 Nm, permissible torque 0.2 Nm - 4 Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 8 Nm, permissible torque 0.2 Nm - 8 Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 8 Nm, permissible torque 3.5 Nm - 8 Nm, 2 gear ratios of 1:50 and 1:100.
|
|
Mounting size: 60mm, 80mm and 90mm
Output power: 20, 40 and 90W
Speed range: 100 - 2000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-230V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type. |
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
PMD's Motor Control IC is an extremely compact single axis drive controller for demanding applications using a brushless DC motor.
The MC73110 Motor Control IC provides high performance digital current loop, velocity loop and commutation for brushless DC motors. This intelligent single-axis drive controller operates in internal velocity profile mode, velocity mode with an external velocity command signal, or torque mode with an external torque signal. |
|
| The PIC-SERVO SC Motion Control Chip is a complete servo motion control system based on the PIC18F2331 microcontroller. It executes all of the real time processes (PID servo filter, motion profiling, commutation, error monitoring, communications) needed for controlling your motor. The simple serial NMC communications protocol lets you easily connect your microcontroller or PC host computer to multiple controller chips. |
|
| ... products without technical information |
| |
RA™ Shielded Cup Mount
Effective vibration isolation for different types of machines with rotating movements.
Compressors
Pumps
Generators
Engines
The RA™ Mount loads the rubber profile in shear and compression obtaining good vertical flexibility with the advantage of horizontal stability. For even better isolation, the alternative RAEM™ or M™ can be chosen.
Its unique construction and the latest production methods make the RA™ Mount a high performance mount with the following advantages:
- Rubber features are utilized effectively combining compression and shear
- Tight tolerances on dynamic stiffness rate for accurate vibration calculations
- Wide load rating options
- Corrosion protected to cope with arduous environments
- Strong base material withstands loads without deformation |
|
RA™ Shielded Cup Mount
Effective vibration isolation for different types of machines with rotating movements.
Compressors
Pumps
Generators
Engines
The RA™ Mount loads the rubber profile in shear and compression obtaining good vertical flexibility with the advantage of horizontal stability. For even better isolation, the alternative RAEM™ or M™ can be chosen.
Its unique construction and the latest production methods make the RA™ Mount a high performance mount with the following advantages:
- Rubber features are utilized effectively combining compression and shear
- Tight tolerances on dynamic stiffness rate for accurate vibration calculations
- Wide load rating options
- Corrosion protected to cope with arduous environments
- Strong base material withstands loads without deformation |
|
|
|
see the results for the following category
