|
|
|
|
|
|
SINAMICS GL150
The rugged converter for synchronous motors up to 75 MW
The LCI-converter (load commutated inverter) SINAMICS GL150 extends the SINAMICS drive family to highest power ratings.
SINAMICS GL150 is designed as a drive converter for single-motor applications with variable and constant torque characteristic. The converter is available in air- and water-cooled design and achieves power ratings up to 74 MW (water-cooled design). Higher ratings are available on request.
SINAMICS GL150 is used for speed-variable operation as well as for start-up operation of large synchronous motors and generators. The typical speed range extends up to approx. 6000 rpm. When used as start-up converter the speed-range is limited by the synchronous line frequency. Within this range a speed control range of 1:10 or 1:100 can be realized. Due to the topology regenerative (4Q) operation is possible without additional measures. The drive converters SINAMICS GL150 drive converters offer an economical drive solution for highest power ratings of 74 MW and beyond, which can be adapted to specific customer needs with a wide range of optionally available components and accessories.
|
|
GE Motor Control Centers Serve Many Applications
Our low voltage and medium voltage motor control centers are suitable for applications such as pulp and paper, mining and metals, utility, chemical, oil and gas, mass-production manufacturing, and water & waste water. Since 1940, GE motor control centers have been designed and manufactured with demanding applications like this in mind. Our MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards.
|
|
|
|
|
|
The GE Limitamp motor control center provides an economical means of centralizing motor starters and related control equipment. It permits motor control starters, feeders, isolator switches, distribution transformers, interlocking relays, programmable control, metering and other miscellaneous devices to be obtained in a single floor-mounted structural assembly fed from a common enclosed main bus.
Limitamp motor control centers are constructed of standardized heavy gauge vertical sections housing vertical and horizontal buses and compartmented starters. Sections are bolted together to form a single line-up assembly. The entire center may be powered by incoming line connection at a single point.
Typical applications are in paper, steel, cement, rubber, mining, petroleum, chemical, and utility-type industries. Limitamp control is also used in water and sewage plants and public buildings for air conditioning, pumps and compressors.
Features and Benefits
* Visible blade disconnect switch
* Proven, high reliability vacuum contactors (2 million operations)
* Quick-make / quick-break disconnect switch
* Modular, flexible enclosure construction
* Extensive protective relays from GE Multilin®
* Epoxy insulated bus available
* Drawout and stationary contactors
* 1 high and 2 high arrangements
* UL / cUL available on most units
* Large isolated low voltage compartment
* No rear access required
* Matching line-up with all existing Limitamp installed equipment
* Construction Options
- Main bus: 1200A, 2000A, 3600A
- System voltages: 2400V, 3300V, 3600V, 4160V, 4800V, 6600V, 7200V
- Contactor sizes: 400A, 800A
- Enclosure types: NEMA 1, 1A, 2, 3R, 12
- Bus bracing: 50 KA symmetrical
|
|
To compete in a global economy, you need all the parts of your operation working together at maximum efficiency. This includes your motor controls. If you control motors with decades-old technology, you are missing a significant opportunity to gain a competitive edge in your market. Rockwell Automation NEMA Motor Control Centers (MCC) feature intelligent motor controls in a versatile enclosure that help you compete and win in a world economy and the safety features also help you meet your safety goals.
You can save installation and integration time, reduce downtime, increase efficiency and improve process control with our intelligent motor controls from Rockwell Automation. CENTERLINE MCCs feature the following motor controls:
Across-the-line starters with E3 solid-stateoverload relays
SMC and SMC-Flex soft starters
PowerFlex variable frequency AC Drives
|
|
You can save installation and integration time, reduce downtime, increase efficiency and improve process control with our intelligent motor controls from Rockwell Automation. CENTERLINE MCCs feature the following motor controls:
Across-the-line starters with E3 solid-stateoverload relays
SMC and SMC-Flex soft starters
PowerFlex variable frequency AC Drives
What sets these intelligent motor controls apart from traditional motor controls is their ability to capture important performance information about your motors and deliver this information via built-in networking to where it is most valuable.
|
|
|
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads.
|
|
|
|
|
|
AC Magnetic Motor Controls:
AC controllers for use with new or existing wound rotor or squirrel cage motor drives featuring contactor type secondary control or solid state four quadrant speed regulation. They are ideal for motor primary or secondary controls, eddy current brake hoist, counter torque hoists and life bridge controllers. Also available are adjustable frequency drives. Hubbell AC Motor controllers are designed to meet your specifications and constructed to fit you space.
DC Magnetic Motor Controls:
The most complete line of standard and custom controllers. All controllers are front wired, from connected and front accessible in NEMA rated contactor sizes 0 through 8 for EOT crane control, dynamic lowering and reverse-plugging installations. Also available are mill auxiliary controllers, special circuits to meet custom installation requirements and special construction to meet customer specifications.
AC/DC Solid State Motor Controls:
Hubbell's S²MC Solid State Stepless Motor Controls are ideal for controlling overhauling loads such as lift bridges, bridge cranes, bucket/grapple cranes, portal/whirly cranes, turbine cranes, tramways, and coke oven drives.
Utilizing AC induction motors (squirrel cage and wound rotor) the line of S²MC controllers are available in both primary thyristor (4920 series) and secondary thyristor (4940 series) through 500 hp, or more, and capable of operating on 208/230/380/460/575, 3 phase VAC, 50/60 Hz. The line of S²MC controls have been successfully applied on hundreds of applications for over 15 years.
|
|
Spectra Series 8000 Line
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads. In many facilities today, these motor loads often are precision HVAC systems responsible for cooling sensitive electronic equipment - servers, routers, switches, pc's, etc. Any power outage or fault event could severely damage this equipment and ultimately bring all operations to a halt - resulting in huge financial losses.
Since 1940, GE Motor control centers have been designed and manufactured with demanding applications like this in mind. Built using Six Sigma quality guidelines, GE MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards.
|
|
POWERDRIVE: Variable speed Drive - 45 to 1300 kW
Motor control :
- U/F Induction mode
- Open loop vector control mode
- Close loop vector control mode
- Synchronous
Main supply :
- Three phases 400 V - 45 up to 900 kW
- Three phases 525 V - 160 up to 1300 kW
|
|
Variable speed transmission assembled on engine: TECHNOVAR.
the TECHNOVAR is a frequency converter which adapts on all the standardized standard engines. It is fixed on the top, side ventilator to be cooled. Simple to implement, it allows a variation speed to obtain a flow with constant pressure or a variable pressure with constant flow with a high degree of accuracy of adjustment. The parameter setting is easy and the visualization of the data is done locally on screen with liquid crystals. Very useful to optimize the operation of the centrifugal pumps with substantial energy saving on the installations of overpressure, treatment of water, heating, air-conditioning or of systems of filtration or opposite osmosis.
Range of power:
- On engine up to 22 kw.
- In mural version up to 45 kw.
Available in all the current tensions and frequencies.
|
|
T-T Electric proposes a series of Titan Drives with a power range of 0,75 to 300 kW for the wall-mounted version and 400 to 800 kW for the stand-alone cabinet version.
Titan Drive includes numerous functions as standard in order to precisely meet all application requirements.
4 controls in 1 drive - the ultimate drive for all applications:
1 Standard V/f control
2 V/F control with PG feefback
3 Sensorless flux vector control
4 Flux vector current control with PG feedback
TITAN Drive can be applied to a wide range of applications from servo-like precision machinery to multiple motor drives.
|
|
|
The variator alternative course PowerFlex 4 is smallest of the Powerflex range. It is a powerful variator of frequency while remaining of an obstruction very compact. With a response time very court of the digital entries, this variator answers the majority of the requirements in order for engines. All these variators are delivered with a guide of the multilingual user and a CD-ROM of reference.
|
|
|
|
|
|
Unidrive SP Modular 45kW – 1.9MW
200V/400V/575V/690V
Modular high power performance AC drive
The Unidrive SP Modular Drives Range offers the same advanced feature set as the panel mount drives but with additional power system fl exibility. Drive modules may be arranged to provide a common DC bus system with or without an active input (regenerative, 4 quadrant operation). Very high current motors may be controlled using a multi-drive modular arrangement.
Applications
The Unidrive SPM drives are suitable for applications in both commercial and industrial applications where power scheme flexibility and regenerative energy saving provides an operational advantage.
Benefits
Unidrive SP Modular offers maximum power system design flexibility. Drive modules can be connected together in a variety of ways to create common DC bus systems, active input systems for returning excess energy to the power supply and parallel drives for high power motors. All drive modules are compact for easy handling.
Modular building blocks
The Unidrive SPM range comprises key modules that can be combined elegantly to achieve your design criteria with maximum economy.
|
|
|
|
|
|
Commander SK
General Purpose AC Drive
0.25kW to 132kW (0.33 to 200HP) 100V / 200V / 400V / 575V / 690V
COMPACT TO FIT...
Commander SK is a compact drive -
A compact footprint with space saving features.
Commander SK gives you back valuable space with its compact footprint and extra features that can eliminate the requirement for additional components such as EMC filters.
In simple applications the onboard PLC feature saves you money by removing the need for an external PLC and power supplies. Integrated fieldbus options minimise the need for external I/O to interface with the drive.
SIMPLE TO USE...
Commander SK is an easy drive - easy to connect, easy to configure and easy to install.
Easy to connect - All connectors are generously sized and clearly labelled.
Easy to configure - The configuration settings you need for most applications are detailed on the front facia of the drive.
Easy to install - Flexibility allows you to install the drive in the best way for your application: All drive sizes can be mounted on a flat surface; DIN rail fixing integrated on small sizes; Provision for through hole mounting is standard above 4kW. This allows the heat from the drive to be dissipated externally meaning the size of the cubicle can be greatly reduced
Power to perform
Commander SK performs - Reliable and productive with exceptional motor performance as you would expect from a Control Techniques drive.
|
|
|
|
|
|
Affinity
Dedicated HVAC/R Drive for Building Automation and Refrigeration
1.1kW to 132kW (1.5hp to 200hp) 200V / 400V / 575V / 690V
IP20 (NEMA 1) and IP54 (NEMA 12)
Affinity – A dedicated HVAC/R drive
Affinity is Control Techniques’ dedicated HVAC/R drive, designed specifically to meet the needs of consultants, contractors and owners of commercial buildings. A comprehensive product line incorporates special drive functionality and accessories to simply and efficiently solve your HVAC/R applications.
Drive for a sustainable future
Affinity addresses the challenges for both today and the coming years. It is created with more than 30 years of drives experience and based on new research that considered the current and future issues and trends in the HVAC/R industry. Affinity incorporates the features you need to be at the forefront of building technology in relation to sustainability, reliability, communications and performance.
Helping you to save energy, day after day
Affinity allows you to minimise wasted energy throughout your buildings by optimising the pump or fan speed to match the environmental conditions within the building. This helps to reduce your energy costs and your carbon footprint. Software tools help to analyse the potential energy savings and can provide the justification to make the capital investment with a known payback period.
|
|
|
|
|
|
Unidrive SP
Free Standing
Fully Engineered Cabinet Drives
90kW to 675kW (150hp to 1000hp)
380 to 690V 3 phase
Unidrive SP Free Standing is a range of compact AC drives for high power motors in the range 90kW to 675kW.
The hard work has been done
Unidrive SP Free Standing drives are fully engineered and tested drive cabinets for AC input AC motor output configurations. Proven design and international approvals release your engineering resources to focus on your application.
Ideal for fans, pumps, extruders
Unidrive SP Free Standing drives are suitable for higher power applications, both commercial and industrial.
Much more compact
Unidrive SP Free Standing drives are up to 50% smaller and are significantly lighter than competitors’ ‘compact’ drive cabinets. This makes Unidrive SP Free Standing the obvious choice where space is a problem.
Proven reliability
Unidrive SP Free Standing utilises mass produced modules of proven design and reliability. The modules and cabinets are assembled using a sequential build process that eliminates build variation and provides consistently high quality. Excellent thermal and electrical design and computer modelling has ensured the drives have a long and productive life with trouble free operation.
Easy to maintain
Compact size and innovative design enables the drive modules to be easily accessed and removed for servicing or replacement. Standard modules ensure ready availability of components.
The Unidrive SP range
Unidrive SP Free Standing is a part of the Unidrive SP family of high performance drives: Unidrive SP Panel Mount 0.37kW - 132kW & Unidrive SP Modular 45kW – 1.9MW
|
|
IndraMotion MLD
the solution of automatism integrated into the variator for the mono and multiaxis applications. Compact and modular structure for decentralized architecture based on the platform IndraDrive hardware
|
|
|
Baldor Drives now offers a complete solution to your motor control needs. From basic analog soft starts to full fledged Vector technology, Baldor offers high performance products in an easy to use interface. Drives start at 0.37kW and continue up to 600kW (800Hp). Custom controls can be built up to 1125kW (1500Hp). Each control is designed and manufactured to be the most reliable on the market. Baldor also offers drives from IP20 open type through to fully enclosed IP66 hosedown type units.
|
|
|
|
|
|
An Intelligent Solution for Every Drive Task
Mitsubishi Electric delivers innovative, open, flexible and reliable drive solutions geared to the special needs of individual markets and customers.
FR-S 500 Series
• Small, compact design
• One-touch Digital Dial for simple operation and configuration
• V/f control
• RS-485 interface
• PID controller
• Motor potentiometer
• Active current control
FR-E 500 Serie
• Compact class dynamic vector frequency inverter
• SLV control method for high torque in the low speed range
• Active current limiting
• Profibus DP, CC-Link, RS-485 interface
• Integrated brake transistor
FR-A 500 Serie
• A high-end drive solution
• SLV, V/f and closed-loop control methods
• Profibus DP, CC-Link, DeviceNet, RS-485 interface
• Automatic motor specifications identification and Online Autotuning
• Soft PWM control
FR-F 700 Serie
• Simple configuration and operation with the one-touch Digital Dial
• Extensive control and data management features, incl. servicing timer
• OEC (Optimum Excitation Control) technology for maximum energy savings
• LonWorks, Profibus DP, CC-Link, DeviceNet and RS-485 interface
• USB port (optional)
• Integrated EMC filter
|
|
The frequency inverter for harsh environments NORDAC SK 750E
With its high IP 54 class of protection, the SK 750E is optimally equipped to meet the requirements of distributed drive control.Allowing for alternative mounting options (wall or motor as appropriate) the device can smoothly be integrated into the existing machine and system architecture.The NORDAC SK 750E is a robust drive control package available with outputs between 5.5 and 22 kW, for connection to supply voltages between 200 and 480 VAC.
|
|
|
|
|
|
The NORDAC SK 500E by NORD - an inverter of (almost) unlimited possibilities!
The SK 500E frequency inverter in book size allows for intelligent configurations to be implemented at a very favourable price.With its high functionality and numerous options the scope of possible uses is virtually unlimited.
Even the basic type has got a multiplicity of features sufficient for the majority of requirements:
four sets of parameters switchable online
sensorless vectorial current control ensuring torques of up to 400%
automatic motor parameter identification
5 control inputs to be parameterized for various digital and analogue control functions
2 digital outputs, 1 analogue output
integrated braking chopper and control of an electromagnetic motor brake
PID controller and process controller
RS 232 & RS 485 interface
32 fixed frequencies (binary-coded)
motor potentiometer function
limit switch control
flying start
Wherever drive control is of the intricate kind the SK 520E with its extra features and options will cope: encoder interface (TTL)
CANopen interface
2 additional digital inputs
2 additional digital outputs
integrated safety features as per EN 654-1 cat. 3. Stop categories 0 and 1 to be available soon
|
|
|
The NORDAC trio SK 300E is a combination of geared motor and highly functional frequency inverter which enables process-oriented, decentralized system configurations to be implemented very conveniently. Designed to ensure maximum ease of handling and operation the inverter is user-friendly in every respect. The inverter is provided with what can be described as an "electronic type plate" which the motor will read and permanently store with the effect that the inverter data are not lost to the motor even if the inverter is removed. As the inverter can be upgraded with a number of modules within the scope of a well thought-out concept, appropriate control components are available to establish the optimal configuration for any process to be controlled.
|
|
After many years of experience with motor-mounted frequency inverters, with the release of the SK 200E NORD has now introduced a new series of devices which enable a wide range of decentralised drive technology solutions. These robust, reliable and economic systems are suitable for extensive plant, e.g. conveyors, and were specially optimised for price-sensitive market segments. Similar to the SK 500E Panel Mount family, an application-oriented performance level is available which offers the same high quality functionality. Expected features of decentralised components such as robust design, integration of plug connectors, rapid replacement and decentralised modules for communication and I/O signals ensure reliable integration of distributed drive units at the field level.
Scope of supply - SK 200E:
1~ 115 V 0.25 – 0.75 kW
1~ 230 V 0.25 – 1.1 kW
3~ 230 V 0.25 – 4.0 kW
3~ 480 V 0.55 – 7.5 kW
|
|
EDS800 mini universal inverter(0.2-1.5KW)
EDS1000 series multi-function universal inverter(0.4-55KW)
EDS1100 series special for drawing machine inverter(1.5-55KW)
EDS1200 series special for cone winding machine inverter
EDS1300 series intermediate frequency(1000HZ) inverter
EDS2000 series high performance universal inverter(2.2-400KW)
EDS2860 series special type with integrated energy save and control for injection molding machine(7.5-55KW)
EDS2080 series types of bypass/variable frequency integrated energy save and control machine(7.5-400KW)
We are looking for agency/reseller/distributor all over the world. Look forward to good news from all of you if you are interested in doing business with us.
|
|
ARIDYNE®2 is Emerson Motor Technologies’/USEM’s new rugged yet simple to setup range of Sensorless Vector Drives. With our 100+ years of motor design and manufacturing experience, who better to trust with your VFD requirements! We understand motor system performance and reliability better than anyone and have put that knowledge into bringing you this friendly yet powerful AC drive – the VARIDYNE®2.
Applications: Ideal for Pumps, Blowers, Conveyors, Mixers, and much more
Operating Environment:
* Ambient temperature -10°C to 40°C
* Electromagnetic Immunity complies with EN61800-3, EN61000-6-1 and EN61000-6-2
* Humidity 95% maximum (non-condensing)
* Electromagnetic Emissions complies with EN61800-3 (second environment) as standard.
* Complies with (with optional footprint EMC filter) EN61000-6-3 (residential) and EN61000-6(industrial) generic.
|
|
Frequency inverters for 3-phase asynchronous motors from 0.18 to 2.2 kW
Description
100... 120 V / 200... 240 V single phase
200... 230 V 3-phase, 50/60 Hz
Speed regulation by flux vector control
Speed range from 1 to 20
Protection of drive and of motor
Robustness even in severe environments from -10 to +50°C
Through wiring and connection using captive screws: simple replacement of electromechanical solutions
Compact, side by side mounting
DIN rail mounting possible
Integrated class B EMC filter or available as an option
Very low leakage current of drive compatible with 30 mA differential circuit-breaker for assured protection of personnel
Baseplate mounted version available
|
|
Variable Speed Drives
GE Consumer & Industrial introduces a complete new line of feature packed drives.
|
|
With their cutting edge technology, the Gefran-Siei ARTDrive series of inverters incorporates all the needs of systems integrators, panel builders and machine manufacturers to guarantee the best control solutions in modern industrial automation systems.
A wide range of motor ratings, power supply settings and sector-specific configurations make this a universal solution for all control architectures.
|
|
|
|
|
|
INGEDRIVE® is a family of low- and medium-voltage, modular AC drives, for demanding single-motor or multi-motor applications. They can handle and control synchronous motors, asynchronous induction motors, and permanent magnet motors. These drives are suitable for four-quadrant operation, driving and braking in both rotation directions.
INGEDRIVE®’s modular design enables it to cover a wide range of powers and voltages while its intuitive structure makes it easy to use and maintain.
Years of experience have made it possible to incorporate advanced vector control via optic fibre for two-level rectifiers and inverters for low-voltage equipment and three-level ones for latest generation semiconductors, IGBTs, HV-IGBTs and IGCTs, the result being a safe, flexible and user-friendly interface.
INGEDRIVE® is available with powers from 250 kW up to 27 MVA, and from 400 V up to 4.16 kV, offering great performance, robustness, reliability, and long life expectancy.
The family’s energy-efficient design is a huge factor in reducing energy consumption.
|
|
- DIGIDRIVE SK: variable speed drive - 0.25 to 132 kW
Motor control : U/F Induction mode, open loop vector control mode
Main supply :
Single phase 110V up to 1.1 kW
Single phase 230V up to 2.2 kW
Three phases 230V up to 30 kW
Three phases 400V up to 132 kW
Three phases 575V up to 110 kW
Three phases 690V up to 132 kW
- UNIDRIVE SP: Universal Variable Speed Drive - 0.37 to 132 kW
Motor control : U/F Induction mode, open loop vector control mode, close loop vector control mode, servo, synchronous
Main supply :
Single phase 230V up to 1.5 kW
Three phases 230V up to 45 kW
Three phases 400V up to 132 kW
Three phases 575V up to 110 kW
Three phases 690V up to 132 kW
- PROXIDRIVE: IP66 Variable speed Drive - 0.37 to 7.5 kW
Motor control : U/F Induction mode, open loop vector control mode, close loop vector control mode, servo
Main supply :
Three phases 230V up to 4 kW
Three phases 400V up to 7.5 kW
|
|
... see all the products in the category
AC drives
|
|
|