|
|
|
|
|
|
M-Series Servo Motors
ORMEC’s M-series AC brushless servo motors provide high torque-to-inertia ratios and excellent continuous torque and peak torque performance in a compact design. These industrial quality servo motors incorporate high performance neodymium permanent magnets and a highly efficient stator winding design which results in excellent power density while maintaining low cogging characteristics.
Key Features
* Continuous Stall Torques from 1.4 to 248 in-lb (0.16 to 28 N-m)
* High Peak Torques from 4.4 to 557 in-lb (0.5 to 63 N-m)
* Output Power from 50 to 4,400 Watts (0.07 to 5.9 HP)
* High Maximum Speeds from 3,000 to 5,000 RPM
* Incremental Encoder resolutions up to 24,000 counts per revolution
* Optional Absolute Encoders feature multi-rev operation up to 1,048,576 cts/rev
* Class F Insulation over Class B temperature rise provides additional thermal headroom
* Minimum Torque Ripple & Cogging for smooth low-speed performance
* Totally Enclosed Non-Ventilated (TENV) standard IP-65 except shaft opening
* Optional Fail-Safe holding brakes
The M-series servo motors also completely eliminate brush wear maintenance problems, and feature extremely durable construction which includes heavy duty bearings. Rugged MS connectors provide reliable interconnections to both motor and optical encoder.
|
|
Series FXM:
This synchronous motor series with permanent magnets offers unmatched dynamic characteristics, sturdiness and great acceleration capability.
Velocity feedback is obtained through an encoder.
They may also have an optional brake and/or shaft with keyway.
|
|
# Peripheral operation, minimized installation needs
# Versions for operation at 24VDC and 48VDC
# Compact and powerful design
# Versions with CANopen interface acc. to CiA DSP 402 V2.0
# Versions with incremental output 1024/rev. RS422 A-,B-,Z-signal
# Dynamic speed control and positioning
# To combine with planetary gear GPK45/55 (1-, 2-stages; up to i=49:1)
# Parking brake available
# High protection class IP54 (IP65 as an option)
# Maintenance free and robust
# Customer specific design
|
|
|
Our AC synchronous servomotors have a very high power density and enable highly dynamic positioning drives with an excellent price/performance ratio. For maximum flexibility, the servomotors are compatible with the standard servo connection dimensions. The AC synchronous servomotors are equipped with an absolute sensor system: SinCos® Singleturn (SRS, SKS) or SinCos® Multiturn (SRM, SKM). The encoder system with the Hiperface® interface enables auto-initialisation of the motor and current controller parameters. This greatly simplifies the commissioning procedure of the drive system.
|
|
Technical Data: FMD motors
- Nominal torque: 0.5 Nm to 68 Nm
- Rated speed range: 2000 to 6000U/min
- Flange dimensions: 58, 70, 92, 115, 142 and 190mm
- Protection class: IP65
|
|
Brushless three-phase synchronous servo motors with permanent magnets.
- Static torque 0.1 to 115 Nm.
- Particularly high power density
- Large rotational speed control range
- High dynamics and precision
- Maintenance-free
- Optionally with brake
Customer-specific solutions: high rotational speeds, special flanges, special shafts etc.
|
|
|
|
|
|
DSD - the servo motors for highly dynamic applications
The six installation sizes for the DSD-range of Baumüller offer a suitable solutions for almost every application in the automation.
The servo motors for highly dynamic applications with the highest requirements of acceleration capacity and the best start-stop qualities, such as for:
packaging machines
textile machines
plastic machines
handling machines
special machines
small robots
DSD 28-100 - Dynamic Motors
high torque accuracy
high speed
almost no cogging effect
compact frame size with high power density
maximum dynamic response due to excellent torque - inertia ratio
smooth housing surface – not easily soiled
sleek, uniform housing
permanent field synchronous servo motors
main connection via terminal box or connector (DSD 28 - 45 only via connector)
IP44, other protection type on request (DSD 28 - 36)
IP65 non-ventilated, IP54 surface-ventilated with fan (DSD 45 - 100)
encoders: resolver 2-pole, SinCos-encoder (optional)
more encoders available on request
all types optionally with brake
|
|
While smaller in size, gives highest dynamics and output power.
The servomotors presented here are only a small part of the wide Groschopp product range.
|
|
Meeting stringent requirements in terms of response, precision and excellent power-to-size ratio.
The motor sizes have been carefully graded and offer rated torques from 0.8 to 64 Nm (0.25 to 10.0 kW) and peak torques of up to 191 Nm. As a result, finding the optimum motor for any drive task is easy.
|
|
The LSH Servomotor - the power pack
Nominal torque 0,2 Nm up to 20 Nm
Based on the new winding technology, the so-called concentrated winding, the new LSH generation of motors improves power density by between 30% and 70% relative to conventional technologies. For the user that means as much as a 100% improvement in dynamics, and more compact installation combined with smooth running.
The LST-Servomotor - the versatile one
Nominal torque 0,1 Nm up to 24 Nm
Featuring conventional winding technology, the LST motor combines all the advantages of a 6-pole synchronous servomotor.
* Well suited to speeds up to 9000 rpm. Special windings are possible on request.
* High overload capacity even at standstill based on efficient heat distribution in the stator packet.
* Increased rotor moment of inertia for torque adaptation.
|
|
Motor model No. Unit Q4AA1811KB
Rated Output kW 11
Rated Rotation Speed min-1 1500
Max. Rotation Speed min-1 2000
Rated Torque N·m 70
Continuous Stall Torque N·m 70
Inst. Max. Stall Torque N·m 190
Rated Armature Current Arms 54
Continuous Stall Armature Current Arms 53
Instant. Max. Stall Armature Current Arms 155
Torque Constant N·m/Arms 1.42
Induced Voltage Constant mv/min-1 49.7
Per-Phase Armature Resistance Ohm 0.025
Rated Power Rate kW/s 780
Electrical Time Constant ms 31
Mechanical Time Constant ms 0.23
Rotor Inertia (INC) ×10-4 kg·m2 63
Sensor: Reduced Wiring INC P/R 2000
Mass-including Red. Wiring INC kg 60
Motor Operating Temp 0 to 40 °C
Rel. Humidity Maximum 90% RH (no condensation) Maximum 90% RH (no condensation)
Cooling Fan Motor W 39/33 200V AC +10% Single phase 50/60Hz
|
|
MAD Series – Air-Cooled Asynchronous Servo Motors
With modern development and production processes, a significant performance increase can be achieved in contrast to previous models. Unparalleled performance: Drive and fan motors offer an IP65 protection rating
MAF Series – Liquid-Cooled Asynchronous Servo Motors
The MAF series with liquid cooling provides high sustained performance in a compact package. Robust and maintainable. The quick-release coupler with integrated leakage protection can be disconnected under full coolant pressure. The encoder systems are accessible from the outside and simplify on-site service.
|
|
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
|
|
| ... products without technical information |
| |
|
|