|
|
|
EMC/EMI filters on the DC side of PV inverters contribute significantly to the compliance with the EMC directive and to an increased system reliability. With the introduction of the FN 2200 range of filters, Schaffner presents the most compact solution in the market today. It is based upon the combination of innovative technology with years of application specific experience.
|
|
|
Schaffner ECOsine™ harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric system capacity better, and are the key to meet Power Quality standards such as IEEE 519.
|
|
Single-Phase EMI/EMC Filter
Single-phase filters for chassis or DIN-rail mounting are key for EMC compliance of higher power office equipment and low to medium power industrial applications. A broad selection of electrical and mechanical features allows a specific choice and deployment for countless applications.
|
|
Three-phase and neutral line filters are a compact solution for the interference suppression on the mains input of cabinets and control units of equipment, ranging from industrial applications like machine tools to sensitive medical installations. These typically involve separate and often
insufficiently filtered frequency inverters and SMPS, causing current imbalance and significant interference problems. As individual elements they may be interference-suppressed already. The conjunction of several switching components in the same cabinet and a non-EMC conscious cabling will rise the demand for an additional EMC filter on the mains input of the whole installation. Many times this is the only way to get the CE mark for the cabinet in accordance with the EMC directive.
|
|
|
EMC filter solutions for industrial applications like motor drives and machine tools. Furthermore, these types of filters are also suitable for mainframe computer systems, large uninterruptible power supplies, medical equipment, wind turbine power stations and a vast array of other threephase power electronics.
|
|
|
|
|
|
Find the ideal method to filter the AC or DC power entering your system to prevent radiated or conducted EMI with Spectrum Advanced Specialty Products’ line of standard power filters and custom power solutions. We differentiate ourselves from typical filter suppliers by offering our customers an integrated approach to EMC problem solving through consulting, diagnostic testing and manufacturing. Our power filters are designed in multiple configurations to cover a range of industrial applications. Available in single and dual stage, these power filters have excellent attenuation for high voltage impulse and are ideal for meeting broad frequency applications. As a high reliability product, we also offer low leakage and non-magnetic options. The result is an EMI power filter to lower your costs and reduce your time to market.
• Application-specific designs for the military, commercial, industrial and medical markets
• Available to meet MIL-PRF-15733 and MIL-STD-461 standards
• RoHS compliant
• Bolt-in or snap-in model varieties available
• Effective EMI performance from 100 kHz through 1.0 GHz
• Operating temperature range of -40°C to +85°C without derating
• Current ratings to 300 Amps
• UL approved and SEMKO approvals pending
|
|
three-phase filter with neutral FVTO-IV Series double phase
Features:
General purpose filter
* For frequency converters / PDS.
* Footprint mounting.
* High attenuation.
* Small size.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 1300Vdc 2s.
* - Li-›Lj: 2250Vdc 2s. Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
PFT Series - Three-Phase + Neutral Line Filters - for General Use
Features:
Characteristics
* Three phase with neutral filter.
* For switching applications.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 1300Vdc 2s.
* - Li-›Lj: 2250Vdc 2s. Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
FVNSB: Three phase + neutral filters for industrial applications
Features:
Three phase one stage filter
* For industrial machinery units.
* Compact size.
* With neutral line.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 2750Vdc 2s.
- L-›N: 2250Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
STF: Three phase + neutral filters for solar technology applications
Features:
Three phase with neutral filters
* Single stage.
* Solar photovoltaic applications.
* Compact model to save space.
* Low leakage current.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vdc 2s.
- L-›N: 2250Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
FVDT 3-Phase for Frequency Converters without Neutral (150A-900A)
Features:
Three phase double stage filter
* Double stage ultra compac three phase filter.
* High performance for frequency converters.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 2250 Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
FVST 3-Phase for Frequency Converters without Neutral (6-110A)
Features:
Characteristics
* Three stage single phase filter.
* For fast switching applications.
* High current.
* High voltage versions available on request.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 2250Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
FVDT-D 3-Phase for Frequency Converters without Neutral (6-28A)
Features:
Characteristics
* Three phase double stage filter.
* Low leakage current.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 2250 Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
HCWMGF Series: Three phase filters for wind mill applications
Features:
Three phase filters
* High power filters for rated currents up to 2500A.
* Attenuation loss for class A compliance.
* Optional protective cover for busbar.
* High voltage for IT networks.
Applications
* High power converters and inverters.
* UPS.
* Renewable energy equipment.
General specifications
* Maximum operating voltage: 720Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3100Vdc 2s.
- L-›N: 3000Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
FVSB Three pase double stage filter
Features:
Three phase double stage filter
* For industrial equipment.
* Small size.
* Easy to install.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 2250 Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
FVDT 3-Phase for Frequency Converters without Neutral (up to 150A)
Features:
Three phase double stage filter
* Double stage three phase filter.
* High performance for frequency converters.
* High current.
* High voltages available on request.
General specifications
* Maximum operating voltage: 520Vac.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 2250 Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
|
|
|
LCR's Single Phase Industrial EMI filters (RFI filters, EMC filters) attenuate electrical noise generated from industrial, telecommunication, commercial, military and medical electrical and electronic equipment. These EMI filters attenuate mains-borne electromagnetic interference from 100 kHz upwards to very high frequencies.
|
|
Protection Filters are used on distribution networks which have a high THD (Total harmonic distortion), when the final target is to compensate the power factor at the fundamental frequency.
Its purpose is to avoid overloads due to harmonic currents in the capacitor, deflecting them to the network.
Protection filters are made with serial reactors and capacitors. The tuned frequency of each unit is adjusted between the fundamental and the lower harmonic present in the net, which usually is the 5 th order.
In this way, the filters present high inductive impedance for all the harmonic frequencies.
|
|
Characteristics
Protection IP00
Standards = IEC60289 (UNE20-144)
Electric choke protection = class H
Overvoltage factor p=7%
Resonnance Frequency = 180 Hz
Inductance tolerance = 3%
Dielectric strength = 4 kV
Admissible overload = 1.2 In
Lineality inductance to 1.6*In
Max. ambient temperature = 40°C
Constructive characteristics
Termic class = B (130°C)
Wire copper class F (155°C) and H (180°C)
Magnetic plate V400
Protection thermostate 100°C
Impregnation class H (180°C) with high level solid elements varnish.
|
|
|
LCR offers a broad range of standard off the shelf Power Entry Filters and Filtered Power Entry Modules. In addition, LCR also offers standard off the shelf Power Line Filters (Power Inlet Filters). All of these EMI filters are available in both general purpose and low leakage current medical versions.
|
|
|
LCR's 3 Phase EMI filters (RFI filters, EMC filters) are typically used in Power Electronic products. These EMI filters attenuate mains-borne EMI generated back into the power line. LCR's 3 phase EMI filters also protect sensitive electronics and make them less susceptible to surges, Electrostatic Discharge (ESD) and other harmful voltage and current surges. Typical applications for these EMI filters (RFI filters, EMC filters) are in three-phase industrial drives, controllers, frequency converters and industrial machine tools.
|
|
|
The GEMTRAP® line of fixed, harmonically suppressed capacitors permits the installation of power factor correction capacitors on systems with nonlinear load components. The GEMTRAP® system can be tuned to any desired frequency but is normally tuned to the 4.7th harmonic.
|
|
| ... products without technical information |
| |
|
|
