|
|
ACCEZ-1000-AUT
ACCEZ-1000-AUT is a kit composed for a proximity reader and a standalone controller for 1.000 users.
The programming is done through 2 internal buttons and a display screen of 3 characters. Has got one relay output and also allows connecting an exit push-button that activates the relay. The activation relay is temporized and can also be configured as bistable.
The reader is supplied with 1 card and 1 tag free, considered as “masters” that allow memorizing more cards when they have been previously approached to the reader. The keyboard and the display allow easily adding or removing cards from the memory in case of lost or theft. The terminal blocks are connectable simplifying the connection, and once connected to the equip a cover protects the controller letting the display visible.
|
|
COMPASS access control system
• A MODEL FOR EVERY NEED.
> Multiple application possibility thanks to the broad range of cards managed (up to 6000) in standalone mode.
> The wide range of components and accessories makes it possible to create a product to measure for every need.
• SMART TECHNOLOGY.
> Parameter variations are made without interrupting operation of the system.
• SAFE USE.
> Identification of the cards is carried out in an environment which is separate from the reading one, thereby guaranteeing the system's inaccessibility even if the card reader is tampered with.
|
|
|
|
|
|
Stand Alone Touchplate Card Reader
The 26SA standalone access control unit provides an effective and inexpensive solution to access control requirements without the need for secondary controllers, software or expensive cable runs when interfaced with a CPEAPE auto gate. A "touch" of the card on the stainless steel face plate allows the 26SA to read the card and grant access to the parking facility.
DESCRIPTION
Self Contained
3500 Card Capacity
Touch Card Slotless Reader
No Control Panels or Secondary Electronics
Easy To Install
Low Power Consumption
Non-Volatile Memory
Timed Anti-Passback (1750 Card Maximum)
SPECIFICATIONS
The 26SA card access control unit utilizes state-of the art electronics in providing a unit that is both inexpensive and fully programmable. The patented slotless reader is protected from weather and vandalism. Simply place the card on the stainless steel touch plate and the card is read instantly and without error. A green light indicates that access has been granted.
Power Requirements:
The 26SA operates from 8 to 24 volts, AC or DC, and consumes less than 200 milliamps.
Outputs:
Latch SPDT Contact, 115V AC or 28V DC, 3A Maximum.
Alarm Shunt SPDT Contact, 115V AC or 28V DC, 2A Maximum.
Tamper SPDT Contact, 115V AC, 2A Maximum (Optional).
Environment:
Ambient Temperature -40°C to 70°C.
Humidity 0% to 90% relative humidity (Non-condensing).
Operational:
Memory E2PROM (non-volatile).
Because the ENTRACOMP® 26SA has non-volatile memory, reprogramming after a power loss is a thing of the past. Validating and voiding of cards as well as other programming functions are easily accomplished from outside the housing using a few cards.
Card Capacity 3500 Cards.
Up to three facility code codes simultaneously.
Programmable latch/alarm shunt timer from 1 to 30 sec.
Size:
The 26SA card access control unit easily surface mounts to a single gang masonry wall, post or almost any surface.
117 mm (4.6") High x 102 mm (4") Wide x 57 mm (2.25") Deep.
|
|
The MRMAG and MRMAGINOX readers of magnetic cards read the card information is coded onto track 2 in accordance with the ISO standards and is in CLOCK and DATA and CLS (the latter only for MRMAG) protocols.
MRMAG uses the MW30 converter, supplied with the reader, the signals are converted in the Wiegand 30 bit format compatible with all the Prastel access control units and with all the systems that accept this data format.
|
|
| ... products without technical information |
| |
ACCEZ-1000-AUT
ACCEZ-1000-AUT is a kit composed for a proximity reader and a standalone controller for 1.000 users.
The programming is done through 2 internal buttons and a display screen of 3 characters. Has got one relay output and also allows connecting an exit push-button that activates the relay. The activation relay is temporized and can also be configured as bistable.
The reader is supplied with 1 card and 1 tag free, considered as “masters” that allow memorizing more cards when they have been previously approached to the reader. The keyboard and the display allow easily adding or removing cards from the memory in case of lost or theft. The terminal blocks are connectable simplifying the connection, and once connected to the equip a cover protects the controller letting the display visible.
|
|
| ... products without technical information |
| |
|
|
|
|
EEA001 Enhanced micro-stepping controller of 2 phase stepping motors drives.
The ASIC EEA001 is a complete controller of enhanced, high performance, drives for stepping motors integrating the functions of sequencer and power stages control and protection against overcurrent,over & under-voltage, over-temperature. Mastered by the standard step motor drive's controls (Step, Direction, Enable) it ensures the highest motor's performances through the execution of Micro-stepping movements at high step resolution (up to 1/256) permitted by no odd harmonics sinusoidally shaped winding currents (Maximum step frequency: 2,56 MHz). The ASIC also allows to set a smoothing factor to optimize the drive and motor performances in terms of:
- high speed and torque at shaft - low heating of the drive
- no vibrations - low heating of the motor
- no resonances - very low mechanical noise
Designed to manage two power-stages configured as "H-bridge" working in bipolar chopper mode, the ASIC features a switching frequency of 33 kHz and a circuitry interfacing the drive's power stages designed to offer the widest compatibility with the most popular integrated circuits for MOSFET and IGBT gates driving, being compatible with most of cheap monolithic power circuits too.
ASIC's set up inputs can fit for drive's end user application step angle and phase current, activating the optional automatic current reduction at standstill, of the motor, and several optional drive operating modes such as CLK_UP/CLK_DWN, inputs active edge and Enable input polarity.
|
|
TMCM-013-42
Description
1-axis stepper driver 1.1A/30V (step/dir.), motor mountable
The TMCM-013-42 is a step / direction stepper motor driver for integration directly on a 42mm / NEMA-17 motor. The TMCM-013-42-LA supports 42mm / NEMA-17 linear actuators. The parameters like motor current and µStep resolution can be changed easily using the RS-485 interface with an ASCII protocol (e.g. with Hyperterminal). Also the firmware of the module can be updated via the serial interface. All settings are stored in an internal EEPROM, so that no bus-system is required in the application. The module is fully protected and comes with a stand-alone reference search feature, using the integrated reference switch input or StallGuard?.
The module can be used in Step-Direction mode, remote controlled via a RS485 interface, or even as an option in a pseudo DC motor mode.
The possibility to adjust the micro step resolution delivers either very high accuracy or high speed.
|
|
CB02N/CB02P :
These circuit boards are used to drive and protect brushless motorized rollers.
Motor torque depends on the speed variation required
Functions:
- Motor Run/Stop
- Selection of the direction of rotation of the motor
- Stopping with dynamic brake
- Error signal
- Variable speed
- NPN logic with CB02N / PNP logic with CB02P
|
|
|
|
