|
|
|
ICP manufacture a range of paper / sintered friction and steel intermediate plates. The product range covers most industrial and off highway applications and is produced to high quality standards. Excellent availability and delivery including low volumes for special applications.
|
|
Clutch & Brake plates for applications including industrial & automotive.
FTL material is used by OEM's throughout the world. High friction materials in non asbestos organic designedv to give the maximum life without damaging the mating surface.
|
|
|
|
|
|
This product group includes all plate type friction components for clutches and brakes which possess driving teeth or lugs on their outer or inner diameters. Both plate and counterplate must be considered together, in general one plate with friction material works together with a counterplate of steel or cast iron.
The plates are the important functional element in every clutch and brake, and have been developed in many different ways since the early days of clutches and brakes. Ortlinghaus has played an important role in the total development of friction clutches, one example of its contributions being the patented, well known, sprung steel plate, known world-wide under the trademark 'Sinus'. The use for the first time of sintered plates in clutches, was also an important development. In the course of this development every relevant technological step forward - whether in frictional material, mechanical or heat treatment process -has been applied directly to the manufacture of the plates. As a result Ortlinghaus plates today contain the results of nearly one hundred years of research and development and represent a highly specialised component.
Supported by the experience gained over this long period of time, Ortlinghaus is today, able to provide a very comprehensive range of clutch and brake plates in a multitude of different dimensions, friction combinations and surface patterns. The number of standard plates listed in our catalogue is large and most of these are available ex stock, satisfying most of our customer requirement from this well proven range. Our customers benefit from quick availability angood price arrived at from volume production. Should it not be possible to solve a particular design problem with these plates, as listed in our catalogue, we are always ready to manufacture plates to meet specific customer wishes. In this area too our experience is extensive, every requirement can be satisfied with the aid of the most modern manufacturing techniques forms of oil channels.
|
|
|
|
|
|
Discs
For the drive technology, e.g. in clutches and brakes for gearboxes, wheel and chain driven vehicles, conveying systems and ships, discs and flat products in various designs up to a diameter of 1000 mm are manufactured in specific production plants.
The large variety of machining capacity, such as punching and broaching, thermal treatment, grinding combined with systematic quality assurance over the entire working process, provides optimum conditions for material and surface quality, hardness and stress relieving, parallelism and flatness.
Straight blanking punching technique
The market and consequently our customers and interested parties are continuously claiming on us:
* to increase the attractiveness of the products by involving new ways of thinking and working.
* to shorten the developing times
* to optimise the adaptation to the market requirements
To master these requirements of the global market we have made investments - among others - into the straight blanking punching technique.
This investment enables us to offer the following advantages:
* improvement of the cutting edges by up to 75%, consequently considerable increase of the bearing share compared with the conventional punching technique;
* variety of production possibilities in an economically large operation field between the mechanical production and the fine blanking technique;
* tool manufacture which is favourable in price
|
|
Friction cone manufactured in asbestos free woven and moulded material.
ICP155 cotton fibre material and ICP171 woven material available from stock.
Applications include overhead crane & centrifugal clutch.
|
|
|
Ortlinghaus supplies also long-range accessories beside the press clutches for many years for the efficient control and monitoring of the press drive: hydraulic control units with press relief valve and soft dome and - brake characteristic of hydraulic aggregates turning introductions electronic slip controls of questions it us after aud your press optimally co-ordinated accessories.
|
|
Industrial clutch parts have a fantastic range of Sintered friction pads for dynamic wind turbine applications. Please visit our website to view the different applications available.
|
|
|
Industrial friction pads and linings manufactured in organic moulded material. Available in either metallic & non metallic material with high friction coefficient for stopping or low friction coefficient for slipping applications.
|
|
|
A large selection of friction rings and discs manufactured to order. Differing sizes and geometric characteristics. Friction material meets all European and US specifications. Applications include automotive & industrial. All material is asbestos free. Available with brass, copper, and steel impregnation.
|
|
Flexible Moulded Roll:
Ideal for Drum, Shoe and Band applications. Optional wire re-inforcement increases durability. Wide range of friction coeffients for stopping, holding and tensioning.
Applications include :
Cranes, winches, fork lift trucks,Oil drilling and production plants
Lift Brakes, Trains and transport systems
Flexible Woven Roll:
Ideal for marine winch and overhead crane applications. Available in 330mm wide rolls up to 38mm thick. Slit widths available at short notice.
Material can be manufactured with brass, zinc, steel or copper wire.
Also availble in flat sheet form and suitable for gear tooth applications.
Non metallic cotton fibre material available for food industry type applications
|
|
|
Friction Technology manufacture sintered friction material for various applications including static & dynamic wind turbine, off highway, multi disc clutch, marine, leisure park rides, aerospace, agriculture.
|
|
|
Asbestos free brake linings and pads for off highway & industrial applications. Heavy Duty material formulations for extended pad wear. Anti squeal material available with or without wear indicators. Available drilled or in blank form.
|
|
Sintered friction pads for wind turbine applications.
Suitable for Dynamic & static operations (stopping & holding).
FTL materials are fully approved and have been designed to be stable at high temperatures whilst being kind to the mating surface.
|
|
Friction Technology Ltd can manufacture friction discs to order. A large selection of friction material with differing sizes and geometric characteristics. Friction disc for all types of industrial & automotive applications
FTL carry a large stock of flat sheet friction material from 2mm thick up to 60mm thick Discs can be turned, stamped or CNC machined to the customers specific requirements.
|
|
Brake pads for heavy industrial and off road vehicle applications.
Semi-metallic,non asbestos organic and sintered materials manufactured to order.
New carbon fibre material also available for some heavy duty application.
|
|
Kevlar based composite brake lining
Lasts up to 3 to 5 times longer than moulded organic friction materials
Use with winders, re-winders, sheeters, paper machines, roll stands, crane brakes and many more!
Never scratches or damages brake discs or brake drums
Ideal for both wet and dry applications - the coefficient of friction, and therefore torque and tension is higher.
Asbestos free - no dust problems
Ideal as a replacement for sintered material.
|
|
| ... products without technical information |
| |
Brand Name:
EBI
Country of Origin:
China (mainland)
Key Specifications/Special Features:
High precision class
Low noise & Vibration
Superior Sealing
Various sizes for different car engine models
Good life performance
Primary Competitive Advantages:
Price
Quality Approvals
Main Export Markets:
Worldwide
Payment Details:
Payment Terms:
L/C, T/T or D/P at sight
Delivery Details:
FOB Port:
Ningbo or Shanghai
|
|
|
|
|
|
SKF KOYO
VKC2051 40TMK20-1S
VKC2064 40TMK29
VKC2080 40TNK20
VKC2091 45TNK20
VKC2111 48RCT3301
VKC2115 48RCT3303
VKC2131 60TMK20U3
VKC2169 62TMK20-1
VKC2181 65TNK20
VKC2185 93TKC6301
VKC2189 CBU32444
VKC2191 CBU442822
VKC2193 CBU442822H
VKC2195 CBU472921
VKC2205 CBU553524
VKC2216 CT1310
VKC2238 CT1310ARSE
VKC2240 CT38-1L1
VKC2241 CT45-1S
VKC2243 CT52A-1
VKC2248 CT541SA
VKC2260 CT5582RU
VKC2516 CT55BL1
VKC2520 CT70B
VKC2523 CT70BL1
VKC2535 CT78-4801R
VKC2536 RCT282SA
VKC2548 RCT283SA
VKC2601 RCT283SA
VKC3500 RCT322SA
VKC3502 RCT331SA
VKC3504 RCT3360A2RRS
VKC3505 RCT3360A2RS
VKC3506 RCT336SA
VKC3507 RCT337SA3
VKC3508 RCT35-1
VKC3509 RCT3558ARUS
VKC3511 RCT3558ARUSL1
VKC3512 RCT356SA6
VKC3513 RCT356SA8
VKC3514 RCT356SA9
VKC3515 RCT356SA9-1
VKC3516 RCT363SA
VKC3519 RCT363SA-1
VKC3520 RCT371SA
VKC3523 RCT37SA1
VKC3524 RCT38SL1
VKC3525 RCT40
VKC3527 RCT401SA
VKC3537 RCT4064S
VKC3538 RCT4064SL1
VKC3540 RCT4068A2RSE
VKC3541 RCT4075-1S
VKC3543 RCT40SA
VKC3545 RCT40SA2
VKC3546 RCT40SA3
VKC3548 RCT422SA1
VKC3551 RCT432SA
VKC3554 RCT45-1S
VKC3555 RCT4700SA
|
|
| ... products without technical information |
| |
CLUTCHES TEST STAND
Automatic production test stand for multidisk clutches. It executes running in and understanding slipping torque.
|
|
|
The Model 2909 Clutch Durability Test Machine is used to measure clutch wear over extended operating conditions. Accelerated results of clutch durability may be examined over shorter periods of time and under extreme or typical operating conditions. Characteristics such as wear, slip, travel and engagement time may be viewed in real time.
|
|
| ... products without technical information |
| |
6t / 15t
High performance, they will carry out your most demanding jobs accurately and reliably.
25t / 45t / 80t
Longlife work machines will give you unequalled productivity and quality gain for the future!
|
|
The ICP Pneumatic Tension brake is equipped with an electrical fan for high thermal capacity. It is mainly suitable for winding and unwinding applications with a high maximum speed. Brake is available with or without guard.
The modular and ergonomic design allows easy re-configuration and maintenance of the braking units. An agile and reliable brake with the best price / quality ratio. Braking torque from 1,9 to 1.760 Nm.
|
|
For applications with light tensions
Wichita offer electromagnetic brakes
from our sister company Warner
Electric
For selection advice please see Tension
Control section or call Wichita
|
|
Clutch Couplings
Automatic freewheel clutches are used in conjunction with a double engagement gear coupling. They can be produced in close coupled or spacer design to suit. The clutch coupling must be stopped to check internal lube oil on a scheduled basis. If space is available, the recommended choice is a Marland CECON clutch with full oil system for non-stop operation.
Long Service Life
Superior Roller Design
No Loose Parts
Automatic Instantaneous Action
Fully Phased
|
|
|
Crush the COSTS of replacement PARTS for your mechanical clutch. The power take-off is suitable for inline and sideload applications on all internal combustion engines with standard SAE flywheel housing dimensions. All units are supplied with sealed ball pilot bearings to eliminate lubrication problems normally encountered. Ball bearing throw-out collars are optional on 14" units and standard on 311 units.
|
|
The Wichita Altra Easy Tension Controller offers probably the most versatile tension control system on the market today. Whether your interest is as system integrator, maintenance production, or quality control manager, the powerful tools will be of benefit to all.
The intuitive Windows based software suite provides powerful diagnostic, management and data logging tools. Graphical PID tuning makes light work of commissioning.
Designed in association with TTS, this controller may be configured to control tension on unwind stands or winders working with any electric or pneumatic brakes via appropriate drivers. The one unit interfaces with load cells, dancers and diameters measurement devices as well as handling splicing.
|
|
The Wichita Altra Sonic is a
potentiometer-regulated ultra-sonic
based tension control system designed
to maintain stable web tension during
the steady running phase of paper, film and foil converting machines.
Simple to set up and use, the Wichita
Altra Sonic is an analogue device
that enables users to save over 50% of the cost of buying and commissioning a more complex digital control system.
Easy set-up
Setting up the controller is
straightforward. The Altra Sonic
receives its input from a scalable
ultrasonic sensor. The sensor scaling is
achieved with just a few button presses.
|
|
|
|
see the results for the following category : 
