|
|
The present K3V is designed specifically for the earth moving and construction industries where in excess of 700,000 units have been supplied.
Features such as high efficiency , high power density, large self priming capability, long life, low noise and a wide range of control options has enabled the K3V to be a clear market leader.
Adopting a process of continual product development has resulted in todays K3V series of axial piston pumps.
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
|
|
SPP Pumps manufactures a comprehensive range of hydraulic submersible pumps in the Hydra range. Covering the widest extent of applications with over 30 highly efficient pump ends, which are available in various material
options to suit the application. This provides the market with one of the largest ranges of hydraulically driven submersible pumps in the world. Driving these pumps is a range of over 25 power pack combinations to ensure optimum performance and efficient matching of the
overall package.
The design of the pump ends provide an enhanced performance and a range that covers medium and high head as well as high flow applications. The Autoprime Hydra product ranges from 32mm (1.25") to 450mm (18")
discharge with heads up to 130m (425ft) and flows up to 2,300m3/h (10,100 USgpm).
|
|
| ... products without technical information |
| |
Screw pump for industrial use type SSP
Extremely low running noises
Long working life
Large viscosity range
Fine flow adjustment
Low costs
The suction housing and suction pipe can be offset by 90°
Extremely high performance
Different materials available
Compact design, low pump weight
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Hydraulic injector pump for the injection of liquid or soluble fertilizer into irrigation network.
It is self contained, with no externals parts other than the connection hoses, and with no water pressure lost in the irrigation pipes
A controller ca be connected that acts upon an electrical valve to start and stop the pump in the desired moment
|
|
Piston diaphragm dosing pumps DMH 280 models 280 / 281 / 283 / 285 / 286 / 287 / 288 series
The optimum capacity graduation between 0.63 and 2 x 222 l/h makes this series of extra-rugged dosing pumps stand out. Three drive sizes as well as versions with single or double dosing head are available.
All models are equipped with universally resistant full teflon diaphragms as well as with the patented ALLDOS diaphragm protection system AMS and a vernier scale with a very fine graduation. A variety of options is available, e.g. electric or pneumatic actuators, frequency motor control, special dosing heads or a double diaphragm system with breakage signal.
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Piston diaphragm dosing pumps DMH 280 models 280 / 281 / 283 / 285 / 286 / 287 / 288 series
The optimum capacity graduation between 0.63 and 2 x 222 l/h makes this series of extra-rugged dosing pumps stand out. Three drive sizes as well as versions with single or double dosing head are available.
All models are equipped with universally resistant full teflon diaphragms as well as with the patented ALLDOS diaphragm protection system AMS and a vernier scale with a very fine graduation. A variety of options is available, e.g. electric or pneumatic actuators, frequency motor control, special dosing heads or a double diaphragm system with breakage signal.
|
|
Olmark promotes the most advanced technologies involving the design, the assembly, the thermic and superficial treatment in order to guarantee constant improvement on every single fitting.
The standard productive range includes adapters of the following series:
RQ- BSP-METRIC adapters for parallel connection
RA - BSP-METRIC adapters for multi branching out connection
RJ - UNF JIC adapters for parallel or multi branching out connection
The adapters, produced also in stainless steel, are in conformity with ISO, BSP, JIC, ORFS, SAE and DIN references.
.
|
|
|
|
