|
|
Solideal rubber tracks for Mini excavators: Manufactured to the highest standard with natural rubber compounds for optimum performance.
SOLIDEAL LATEST TECHNOLOGY - The industry's most advanced metal pieces:
- Up to 50% less vibrations
- Reduced risk of de-tracking
- Reduced noise level
UNIQUE TREAD PATTERNS:
- Self cleaning Hauler Step
- Minimal soil disturbance
- Maximum traction
COMPLETE RANGE:
- Solutions to fit most machines on the market
More comfort + Less Machine Maintenance = Reduced Operating Cost per Hour & Downtime
Available Compounds: ERS; Grey Non Marking
For more details, please visit www.solideal.com |
|
Solideal Over the Professional tire Tracks OTT: Manufactured to the highest standard with natural rubber compounds for optimum performance.
ATTACHMENT – non permanent solution to temporarily turn your skidsteer in a Compact Tracked Loader
- Fits all major skidsteer machines using 10x16.5 and 12x16.5 tires
- Ideal for muddy conditions, it improves: stability; manoeuverability; traction
- Lowers ground pressure (full floatation surface)
- Easy to mount and demount in 15 minutes
- Stone resistant carcass
- Low weight
- Low vibration – high comfort
- Patented friction design to prevent tire slippage and detracking = more fuel efficiency
- Includes complete kit and instructions
Available Compounds: ERS
For more details, please visit www.solideal.com |
|
| Rubber rails produced with compound of rubber materials, metal iron core and steel cords include crawler tracks that are used as wheels of a variety of agricultural and constructional machines such as combines, trucks and small snowplows. Our rubber tracks help equipment to improve work efficiency on the soft ground and allow them to move in an environmental-friendly way. In particular, rubber tracks provide a driver with riding comfort by effectively minimizing noise as well as vibration when being used as a substitute of steel chains. |
|
| The SMITH-TRAX® special duty track wheel bearings are machined from high-alloy steel and are case-hardened for maximum longevity. These bearings manufacturers are fitted with deep-groove ball bearings supplier or tapered roller bearings to handle both high radial and thrust load applications. |
|
Since the creation and patenting of the original DualVee® wheel in 1967, it continues to provide easy to use, easy to install guide wheel components and assemblies. DualVee is ideal for a wide array of applications, from the wash room to the sawmill. These rugged yet economical guide wheels are quiet, ideal in long length applications, and tolerant of harsh environments.
DualVee's recirculating elements are self-contained and isolated from the environment; rolling contact between the wheel and track sweeps debris aside, making it ideal for use in contaminated environments.
DualVee offers three different wheel options; original guide wheels, studded guide wheels, and new integral one-piece guide wheels for lower cost and ease of installation. A wide variety of bushings and journals are available.
DualVee single edge or double edge track with patented mounting shoulder is available in carbon steel or stainless steel, induction hardened or "as formed". Hardened track comes in single lengths up to 20 feet, unhardened in lengths up to 22 feet. Track is easily butt-jointed for longer length applications.
A number of accessory items are also available including wheel covers, lubricators, track plate assemblies and wheel plate assemblies.
|
|
A highly effective system for lower cost and accuracy builds up from a single edge track and matching professional wheels. DualVee components are available in a range of sizes to suit most applications with high temperature and vacuum/clean-room options available to complement existing stainless steel components.
- Track lengths up to 6m with unlimited lengths achievable by butting
- Available drilled or un-drilled to minimise additional engineering
- Ex-stock availability |
|
Track wheels with Gothic arch groove - type SG
The function of series SG rollers is same as the series LFR rollers. But they are mainly used in the flat track and in the condition required compact structure. After rollers are installed to the slider, the shaft will be not or seldom over the roller's side planes. |
|
| A LIFETIME BOND must be perfect. With JESA's plastic over moulded ball bearings supplier, the moulded outer and the steel bearings specifications are as one for a lifetime the perfect bond. Our collaborative programs with renowned universities ensures that our products offer cutting edge performance, long life, low noise and constant dissimilar material adhesion. |
|
Guide roller with threaded rod
- Profile in arc of circle for fonctionnemenî on tree
- Lubricated with life and tight
- Composed of a roll of the dice with two oblique lines
- Fixing of the industrial roller by its threaded rod
- Exist in standard version (ref.: FRW) or with eccentric (ref.: FRWE)
- Also Exist in lNOX (ref.: FRW... - VA.FRWE... - GOES)
Another products available: |
|
Rail rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These bearings manufacturers can support axial forces in both directions as well as high radial forces. The bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
|
|
PRECIA-MOLEN is a world leader in weighbridge technology. Ideal for all industries, our weighbridges can be used to determine the net weight of incoming and outgoing goods and in loading and unloading operations. All of our weighbridges are equipped with stainless steel manufacturers of load cells (explosion proof if required) and with a large choice of weighing terminals, which turn the weighbridge into a sophisticated management tool
Road weighbridges
Rail weighbridges
Combined road & rail weighbridges
Truck tippers
Auxiliary equipment
Weighbridge automation
|
|
Integration of MULTIRAIL concrete weighing sleepers without foundation and gaps,
for fully automatic dynamic weight acquisition.
Railway authorities use MULTIRAIL to monitor traffic, as prerequisite for effective track management: wheel loads, wagon weights, defective wheels, and uneven loads are checked at normal track speeds. Intelligent evaluation of measured data with on-line remote diagnosis offers high rates of reproducibility at maximum availability.
Wheel load test stands where new vehicles are manufactured and in maintenance shops
complete the range of RailTec.
|
|
| ... products without technical information |
| |
Bridge cranes
for use in shipyards
Capacity per leg 50+50 t
Max capacity on cantilevers 50 t
Hook elevation 24 m.
Gauge (track width) 22 m.
Lateral overhang 13 m.
Lateral overhang 20 m
Class A8 M5 |
|
Gantry cranes of all span and load capacities, in double or single girder versions, for any industrial sector.
Gantry cranes make it possible to cover large material deposit areas inexpensively, with the only fixed structures required being the ground runways.
Their performance levels, practically unlimited in terms of load-bearing capacity, and sizing potential, make these systems ideal for marble block yards, prefabricated storage areas, container yards, goods yards and raw materials depots. In particular, depending on the gauge, gantry cranes make it possible to create lateral straddles that ensure the whole available area is used. CMR gantry cranes preserve all of the build concepts and the control and handling units of the PRIM overhead-travelling cranes, thus ensuring maximum reliability.
All gantry cranes are assembled and tested in the factory before installation on the customer's site.
CMR lifting equipment features the most innovative electronic systems to eliminate load sway, to ensure the most precise positioning possible and to enable a high degree of control over speed of movement. |
|
Control any size professional clutch or brake with optimum resolution with the PS-24 & PS-90 Supplier of power supplies. These current regulated power supplies are used for the control of magnetic particle clutches and brakes in unwind, rewind, or intermediate tension control applications.
The PS-24 & PS-90 provide a small amount of reverse current circuitry as a standard feature to minimize the drag torque of a clutch / brake, allowing greater controllability in the lowest torque range. With selectable current ranges, these compact enclosures can be mounted inside the machine professional cabinet, allowing your operator to adjust torque through a remotely mounted potentiometer manufacturers. Alternatively, the PS-24 & PS-90 can be controlled by a 0-10 VDC input from a PLC SUPPLIERS or other automatic control device. Both power supplies mount inside the Cygnus-E tension control as convenient package. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
Hoists
|
Assembled according to your schedule of conditions, the Mobirail® systems adapt to the configuration of the professional workstation for an easy handling of the loads (from 75 to 1500 kg) by the operators.
Available in 2 ranges:
- profile hollow rail steel and
- profile hollow rail aluminum.
Combinable with wish according to the degree of expected performances.
Easily integrable pendular systems in any type of building.
Complete program of accessories and adjustable suspensions. |
|
Heavy duty machine for continual use.
Available for manual operation (Model 320-000) or hydraulic operation (Model 320-100).
Includes 1m length stop for cutting accurately to length without waste.
Incorporates cutters for 4 profiles of rail, plus copper earth rail 10mm x 3mm.
Successive operations of the machine are used to punch elongated holes at each end of the rail. One hole is in line with the rail, the other hole is at right angles to the rail.
Standard hole size is 6.4mm x 12mm. Alternative punch sizes are available.
Easy replacement of punches and die. |
|
Kaller Stock Lifters are mainly for use in progression dies.
These units have an extremely robust design that can withstand high side loading.
They therefore allow stock / guide rails to be attached directly to the piston rod.
They can also be mounted upside down in progression dies and used to attached stripper plates without the need for additional guide elements. |
|
4 rolls special machine for guard-rails (2 or 3 waves) suitable for bending either leg-in or leg-out.
|
|
Modular DIN Supplier of terminal blocks for Your Rail Mounted Applications
The Benefits
Mounts on Industry standard DIN Rail
Vibration resistant | | |
