|
|
In industries where washing and drying are key processes, such as in the food industry, steel belts are critical. For example, steel belts are ideal for drying foods to comply with hygienic standards. Steel belts
can be perforated, which, in combination with the
heat stability, allows for excellent drying processes. |
|
| ... products without technical information |
| |
Chart and Paperless recorders
Data Recording and Storage of the Data is fundamental in Process Control.
Quality and repeatibility of the manufacturing data need to be kept under close control for industries such as Food Processing, Conservation and Maturing, Beverage, Pharmaceuticals, Chemicals and Petrochemicals, Heat Treatments, etc.
Ascon offers high reliability and quality Chart Recorders with 100mm and 180mm chart widths and Videographic Paperless Recorders with several sophisticated functions such as Mathematical Functions, Ethernet Serial Communications and unalterable data storage.
The latest technological developments allow the Paperless recorders to compete with the Chart recorders.
|
|
KR2000 Series are network-compatible graphic recorders with high performance and high operating function employed high visibility 5.6"TFT color LCD display. High speed of sampling rate 100ms for 12 points and high accuracy of ±0.1% were realized, and measured data is stored into internal memory and maximum 2GB compact flash card. As it can be monitored by a web browser display on several computers on intranet or internet, FTP transfer of data file and E-mail notification are also available.
The recorder can be used for various applications such as data management, research, development, remote and wide range monitoring by utilizing internet environment. |
|
Operating principle
Electronic measured data recording systems measure the connected input signals and extrapolate the information required for individual applications. This information is then displayed on the screen of the device and is also stored internally or on an exchangeable data storage medium.
This process information can be stored, long term, by transmission to superior systems (e.g. PCs) and is therefore readily available at the touch of a button.
Depending on the process requirement and application the following can be used:
·Data-logger : simple devices with integrated digital display
·Paperless recorders : the electronic alternative to (hybrid) paper strip chart recorders
·Data Manager : powerful devices for stand alone applications and integration into systems
Common to all these devices is that they operate virtually free of wear and tear (no pens and paper) therefore saving time and money.
By using various forms of interfaces they can be integrated into state-of-the-art topologies for measured data recording and process automation. High resolution colour graphic displays make it possible for paperless recorders and data managers to be used for front end process sequences and therefore swift on site reaction.
Mathematical and logical combinations enable complitcated calculations as well as automatic analysis of the measured signal. |
|
EA series electronic recorder
- self-balancing instruments
- 250mm fan-fold chart paper
- alarm function.
Pen-writing types: 1-pen, 2-pen, 3-pen, and 4-pen,
Dot-printing types: 1, 2, 3, 6, 12, and 24-points
- a select-off function.
- Inputs: DC voltage, DC current, thermocouples, resistance thermometers and thermistors.
Can be used in various industrial variables.
Also
EH series recorders
- either continuous pen-writing or multi-point dot-printing systems
- 180mm chart
- record temperature, mV or DC voltage at 1 to 12points.
The measuring systems of mV, thermocouple, resistance thermometer or thermistor are available.
EL series recorders
- compact and modular in design to provide versatility, easy maintenance and reliable operation.
- inputs from mV, thermocouples, resistance thermometers or thermistors.
- 100mm width fanfold chart paper
- available in two versions, 1 to 6 points dot-printing systems and 1-pen, 2-pen or 3-pen continuous pen-writing systems.
ES600 series
- compact industrial analog recorders
- 60mm wide chart paper
- size of 96 x 144mm
- functions comparable with a large-size recorder including a highly reliable self-balancing system, an easy-to-install fanfold recording chart paper, etc. |
|
Product : Linear
Reliable value-priced recorders designed to meet the needs of today’s research and quality control labs. |
|
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports |
|
| High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers. |
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2". |
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF) |
|
Linear ball bushings or PHDs TC fluoropolymer composite bushings are available in each series providing the best value with the least possible slide deflection. Four bushings allow two hardened precision ground shafts to move smoothly while supporting the tool plate and attached loads, providing rugged precise linear motion. .
Advantages: Wide variety of travels and sizes, oversize shafts with PHD's rugged TC bushings provide excellent value |
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks. |
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc. |
|
| ... products without technical information |
| |
The automated lines for sheet metal and rod manipulation, respecting the differences according to the load type and size being handled, consist of the following:
-Decoilers: The decoiler represents the first stage in the process and its mission is to coil / uncoil the reel of sheet metal or other material used and supply it to the press, either directly or by means of a feeder, a feeder-levelling machine.
The decoilers are programmed so they coil or unwind by means of the time control loop (connection and disconnection) and with clockwise or counter-clockwise rotation.
|
|
The printed products from a web press could be delivered as forms or sheets, as folded in various sizes or could also be rewound into a new roll. This last-mentioned production form is often called continuous (non-stop) roll-to-roll production.
MEGTEC supplies automatic rewinders for the printing and converting industries. The product line is comprised of small machines with web widths in the range of 14 inches (350 mm) up to large rewinders made for widths well over 40 inches (1000 mm). Depending on the model, the web speed could be up to 2,450 fpm (750 m/min).
All rewinders are specially designed to produce high quality rolls in a variety of materials producing rolls that are consistently firm right from the core. The perfect rolls produced in a MEGTEC rewinder increase your company's productivity and profitability. |
|
The mechanical handling system on Model SBE 15.SF enables one operator alone to swiftly and saftely transfer coils from the stotage position onto the decoiler without having to use lifting equipment.
A drive is provided so that the strip is decoiled without being strained. |
|
The frame is fabricated from steel pipes.
- The ND models are fitted with an adjustable brake.
- Support by orientables roll bearings.
- The mandrel from steel by 3 inclined plane with expansion range from 470 to 550 mm and hydraulic cylinders which are activated by a electric pump.
- Brake with pneumatic clamp.
- Planetary gear-box + trasmission by double or triple chian. |
|
| ... products without technical information |
| |
| Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate masses or to dissipate kinetic energy. On the other hand, the rod displacement to build up the holding force is very small, so that this units can be used for a approximitive positioning tasks as well. Furthermore this design principle allows compact solutions even for small rod sizes (smaller than for Safety Catchers). In the field of pneumatic clamping devices the Safety Locks are providing the absolutely highest holding forces in relation to housing dimensions. |
|
At the very latest when, because of a power failure (intentional or not) or a malfunction something has to be done to safeguard man and machine, hydraulic clamp Ratio-Clamp® - the clamping device from Hänchen - is just what you need.
Boasting a retention force of up to 450 kN, the hydraulic clamp holds the piston rod in whatever position it is in at that particular moment. Without having to rustle up some extra power (no extra energy) and for an unlimited period of time. The clamping device Ratio-Clamp® is approved by the German Technical Inspection Agency (TÜV). Nor does the development of specific solutions (larger rod diameters, intermediate sizes, greater clamping forces…) pose a problem to the Hänchen specialists.
The possibilities for your application:
Rod-Ø from 10 - 140 mm,
clamping forces from
1 - 450 kN. Other
dimensions on request.
Other products of the range of services:
- Hydraulic cylinders
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories |
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices |
|
Active without pressure - incredible holding force
The pneumatic Clamping and Braking Element for piston rods RB.
The RB series is based on our proven wedge slide gear principle and is used for clamping and braking without pressure. This element was developed for deployment on round-shaft guides or piston rods with a surface hardness of min. HCR 54.
The compact design is suitable for shaft diameters of Ø10 to Ø60 and allows holding forces of up to 60,000 N at a pneumatic opening pressure of just 4 bar.
As a specific feature no reset is needed for restarting.
The RB series stands out for its short reaction times. Even in vertical deployment, short braking distance are achieved in less than 30 ms. Details on the length of the brake path to be expected can be obtained from our technical advisors. The computations are based on serial tests and our industrial experience.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
