|
|
Flex-Lag® Weld-On Ceramic
Eliminate the belt vibration and cleaner chatter often caused by ordinary weld-on lagging by installing Flex-Lag® Weld-OnCeramic Pulley Lagging. It features a new gutterless design with easily installed over-lapping segments. So the wide gaps between strips of conventional weld-on lagging products are eliminated.
Flex-Lag® Ceramic
When conventional rubber lagging fails to correct belt slippage, the solution is Flex-Lag® Ceramic Tile Lagging. Our Ceramic Tile Lagging features the highest coefficient of friction available in lagging materials - two to three times the friction of rubber in wet, muddy or dry conditions. |
|
Micro-arc oxidation (MAO) ceramic coating is a revolutionary method to produce hard and corrosion resistant ceramic coatings on Al, Mg, Ti and other light metals as well as their alloys. MAO method uses the effects of forming micro-arc plasma discharges on the surface of the parts treated in water electrolytic solution. Because of influences of these discharges on the parts, a multi-function protective ceramic coating forms with unique properties:
very high hardness (HV1000-2500); excellent wear resistance; excellent corrosion resistance; extremely high adhesion performance of the coating; dielectric property; high thermal shock resistance; ...
We can provide parts treated with such MAO technology, such as roller, shafts and other parts which require high abrasion wear resistance and corrosion resistance. |
|
| ... products without technical information |
| |
... see all the products in the category
Magnets
|
| ... products without technical information |
| |
OVENS FOR TECHNICAL AND ARTISTIC CERAMICS AND PORCELAIN
EMME GROUP designs and builds gas or electricity powered ovens for the ceramics and porcelain sector using the newest and most advanced technology on the market.
Completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability these ovens have the seal of approval of important groups and customers in various sectors nationally and overseas, including:
Our gas and electricity powered ovens include a vast range of products from, ovens for free time use, to the latest models for large and medium industry.
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations. |
|
| ... products without technical information |
| |
|
... see all the products in the category
Furnaces
|
Noliac's Ceramic Multilayer Benders products are based on the company's advanced multilayer technology, harnessing the full potential of the piezoelectric effect at very low operating voltages.
Multilayer piezoelectric benders are single co-fired ceramic components with ceramic layers and internal electrodes configured as to generate a bending mode.
The most common bender geometry is a narrow rectangle (CMBP) with typical performance range up to +/- 1500µm stroke and up to 10N blocking force.
Noliac has also developed a unique ring shape bender (CMBR) with typical performances range up to +/- 150µm and up to 100N blocking force.
Multilayer benders are used in numerous applications within e.g. optics, telecommunication, instrumentation, automotive, valves. |
|
Actuators, shear plates (CSAP)
Noliac's line of ceramic shear actuator plates (CSAP) is based on the Noliac Group's advanced piezo technology.
Based on the piezoelectric shear mode, Noliac's shear actuators can be made more compact and have higher resonant frequencies than conventional piezo actuators. In addition, their low capacitance results in reduced power requirements for a given generated displacement in dynamic operation.
Shear actuators are used in numerous applications within e.g. nanopositioning, precision mechanics, active vibration cancellation, semiconductor manufacturing and testing. |
|
Argweld® Weld Backing Tape
Glass fibre weld backing tape.
The tape would ideally be used for:
One-sided welding of weldable metal.
To achieve a flatter, smooth, coke free weld bead to minimise the need for post-weld grinding and cleaning.
Common metals welded with 'Backing Tape' include:
carbon steels
stainless steel
chrome-moly and duplex steels
copper nickel
cast iron
The tape comprises a 75 mm wide, heat resistant aluminium sticky tape, in the centre of which is a 25 mm wide band of woven glass fibre cloth.
The material is available in two grades:
Standard 80 amp Light duty for use up to 80 amps
Heavy Duty 160 amp Heavy duty for use up to 160 amps
It is possible to weld onto the tape with MIG, Stick, TIG or plasma processes, so long as the recommended current levels are not exceeded.
The lightweight grade comes in 25 metre lengths and the heavyweight in 12.5 meter lengths.
If lengths are needed to be joined, rolls of the sticky aluminium tape without the fiber are available from Huntingdon Fusion Techniques Limited, allowing a small length to be cut off to join two lengths of the 'Backing Tape' together.
|
|
Strapping machine suitable to strap the pallet vertically, it is equipped with strapping head mod.MS300. The optional features we recommend are:
- retractable sword
- translation device
- device for inclined strapping
- corners protectors device
- model with two heads and two bayonets
- device advising that the reel is finished |
|
System solutions for the Construction industry / For new installations or for integration into existing packaging lines
The right machine
Due to the flexibility of their machine construction programme,
Strapex can offer tailor-made solutions for customers
individual applications.
The right strap
A comprehensive range of plastic strap (PET, PP) and steel strap
each with their own characteristics to ensure that strap and
equipment are always the best possible combination!
Worldwide Sales and Service
You will receive expert advice on choosing the right solution
and service package together with the guaranteed availability
of spare parts. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Cold Isostatic Pressing (CIP) is a method of compacting powders into green bodies and near-net shaped in a pressure vessel. The powder, which can be metallic, ceramic or graphite, is sealed in a flexible mold shaped like the end product. High pressure is used up to 600 MPa (6,000 bar/87,000 psi) having water as pressure medium. A high and uniform density is achieved, resulting in easier handling, easier machining and even predictable shrinking during sintering.
CIP applications include compaction of powders into refractory nozzles, metal filters, graphite parts, ceramics, cemented carbides, etc.
Avure Technologies Isostatic presses are widely recognized as the leading brand in the world. This is due to the Company's technological superiority in a number of areas, particularly in the institutional knowledge related to engineering, design, manufacturing and the application of high pressure. The first QUINTUS ® isostatic press was delivered in 1965.
AVURE offers a full line of standard models of Cold Isostatic Presses or models can also be custom configured to meet your needs. These presses are available with diameters of up to 2,5 m (8.2 feet) for pressures up to 600 MPa (6,000 bar/87,000 psi). Please contact Avure Technologies with your requirements. |
|
|
... see all the products in the category
Presses
|
Ceramic labels are useful in applications where more robust labels cannot withstand the extreme conditions. They tolerate temperatures up to 1400° C and are very resitant to acids and other aggressive chemicals.
Applications:
-manufacturing process of semi-conductors-,lenses or cd identification
-manufacturing process of tools and containers in high temperature areas
-manufacturing process in the aluminium and metal industry
|
|
Our High Tech-series offer VSM quality on the highest level. Due to the continuous self-sharpening the highest level of stock removal, an extra-long service life and hence an economical grinding are realised. At the same time they achieve an improved surface quality.
For applications involving the dry machining of stainless and high-temperature steels we recommend using TOP SIZE products. Their additional lubricating layer provides increased stock removal rates and significantly reduced temperature in the grinding zone, which prevents workpiece structural changes.
The VSM®CERAMICS series are special products for aggressive but cool grinding. The use of VSM®CERAMICS series lead to an increase in productivity with simultaneous improvement of surface quality and outstanding stock removal. |
|
SPK-Cutting Tools is opening up big potentials to increase productivity and efficiency in chip removal machining with innovative cutting materials and tooling, extensive application know-how and intelligent engineering. High Performance Cutting and Hard Part Machining - SPK-Cutting Tools offers excellent solutions for turning, milling and boring of cast iron and of hardened steel.
|
|
Features
- Radial leaded devices
- Aids compliance with:
- ITU-T K.20, K.21, K.45
- Narrow resistance tolerance
- RoHS compliant
Applications
Used as a secondary overcurrent protection
device in:
- Customer Premise Equipment (CPE)
- Central Office (CO)
- Access equipment |
|
SPK-Cutting Tools is opening up big potentials to increase productivity and efficiency in chip removal machining with innovative cutting materials and tooling, extensive application know-how and intelligent engineering. High Performance Cutting and Hard Part Machining - SPK-Cutting Tools offers excellent solutions for turning, milling and boring of cast iron and of hardened steel.
|
|
|
