|
|
Application:
•Decentralized motorization of loads < 500kg (cardboard boxes, trays, totes…) for conveying systems where there is no risk of accumulation
•Regulation for speed in gravity roller conveyors, access gate, bridging between conveyors, 90° transfers, powered roller bends…
•Applicable to all industries (automotive, electronics, mail …) for assembly lines and transfers
Benefits:
•Safety (no exposed transmissions)
•Comfort/Ecological (without oil bath)
•Modular & flexible conveyor zones
•Space saving
•Quick and simple installation removing the need for maintenance (no exposed transmissions)
Concept and characteristics:
•The AC asynchronous motor and the life lubricated planetary gears and bearings are integrated inside the roller tube to drive the loads directly
•Internal shock absorber protects the gearbox
•Continuous or intermittent duty cycle (720 start-stop/hour)
•Speed from 4 to 50 m/min
•IP54, 55 and 65, clean room
•1phase or 3 phase, 50 or 60Hz, from 100 to 440V
•option : accumilation motor or brake motor
AC 1phase & 3 phase range:
•Ø 50 standard: series K
•Ø 57 standard: series A
•Ø 60.5 standard: series B
|
|
|
Metso Minerals delivers the world's most comprehensive range of conveyor belts. Based on more than 100 years of experience in development, manufacture and applications know-how, Trellex belts and belt systems are designed to meet specific end-user requirements for high performance and cost-efficiency.
|
|
Rockline® RBP1 Belt Positioner
The Rockline® RBP1 Belt Positioner™ is the simple, reliable solution for problem belts that continuously mistrack to one side of the conveyor. The Belt Positioner works on the return side belt using simple angled rollers mounted in a fixed position to quickly and continuously funnel the belt into the correct path.
The RBP1 Belt Positioner’s innovative design does not rely on a pivoting mechanism to move and steer a wandering belt like conventional tracking units. The RBP1’s two idler rollers are adjusted to the belt and create a funneling action that continuously "positions" the belt into the correct path. Many times in as few as 5 revolutions of the belt the results can be seen. Plus, the idler rollers on the RBP1 make smooth contact with the return side belt’s bottom cover and not on the belt’s edges which can cause excessive wear and damage to the belt.
Installed before the tail pulley, the Belt Positioner keeps the belt centered at its critical loading point. The RBP1 can also be used at the head pulley, before or after the take-up pulley or anywhere on the return beltline where there is a belt tracking problem. It can also be used on reversing belts.
The RBP1 Belt Positioner comes assembled and ready to install. Simply preset the unit for the conveyor structure width, position the unit on the belt and bolt or weld in place. Adjust the rollers to the belt and watch the results.
|
|
Rockline® RMC1 Skirt Clamps provide the cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs. It stops material loss, eliminates safety hazards and reduces wear and premature failure of conveyor components. RMC1 Skirt Clamps are designed for easy installation, quick maintenance and years of service.
RMC1 Skirt Clamps come in a standard 4" (1200mm) length. An optional "Limited Space" (LS) model is available for tight chute configurations or for portable equipment. Also offered is a "Pick-A-Length" (PAL PAK) option for longer length or special length requirements. The RMC1 handles a variety of skirt rubber sizes. It can also be used with a range of skirt rubber thicknesses from 5/16" (8mm) to 3/4" (19mm).
The RMC1 features a no-hassle installation with few parts. First the clamp pins are positioned on the conveyor's skirt board and welded into place. Then the clamp plates are hung on the pins and the clamp bar and the skirt rubber are inserted. And finally, the clamp bar is tack welded to the plates.
All installation and maintenance work can be done safely from the sides of the conveyor. Just tap loose the locking wedges on the clamp pins, reposition the skirt rubber and relock the pins. The rest of the parts interlock so when the pins are unlocked, they remain in place supporting the skirt rubber while maintenance is completed.
|
|
Ramsey silent conveyor chain offers many features that appeal to designers and operators of industrial conveying systems. It is quiet, strong, smooth, and efficient, and is available in a wide range of widths and styles.
Ramsey Silent Chain is also used extensively for the transport and handling of glassware. Suitable for hot-end handling, cold-end handling, cross conveying, as well as precision inspection and measuring applications, Ramsey chain is designed and built to satisfy the demanding requirements of today's glass industry.
|
|
| Available in thousands of combinations of steel-materials and specifications, each pitch of Tsubaki Conveyor Chain has uniform quality. Application of the latest production technology and our own quality control system allow us to confidently guarantee outstanding performance. |
|
Siegling Transilon conveyor and processing belts for speeding the flow of goods and for economic processing in the light materials handling industry.
The standard Transilon construction consists of polyester fabric as tension member with synthetic or elastomer coatings. Transilon is used successfully in industrial, commercial and service companies worldwide. The standard product range includes over 120 various conveyor belt types and constructions for the most diverse of application requirements.
|
|
Siegling Conducto® ventilation belts
Siegling Lin-Pack folder and carrier belts with Linatex top face
Round belts
Siegling Transtex Conveyor belts offering new possibilities
|
|
Ramsey specializes in silent chains for industrial power transmission and conveying. This has been our focus for more than 80 years and today we remain committed to providing our customers with the world's widest range of top quality silent chain products.
Because we specialize in silent chain, also known as inverted tooth chain, we understand how important it is to choose the right chain and sprockets for each application. We also understand that practical, cost effective, solutions are important to every customer. With this in mind, our trained sales and engineering staff is here to assist you in selecting the solution that will best meet your needs. If a job can be done with silent chain, we will help find the best chain for the job, at the lowest possible cost.
With warehouses and representatives around the world, we welcome the opportunity to serve you.
|
|
Because of their construction conventional conveyor belts are not suitable for many applications. Siegling ProLink modular belts are an excellent solution in these cases: The material is rot-resistant, durable and physiologically safe (all standard materials used are FDA compliant). As a rule cleaning the belts is simple.
|
|
Ramsey specializes in silent chains for industrial power transmission and conveying. This has been our focus for more than 80 years and today we remain committed to providing our customers with the world's widest range of top quality silent chain products.
Because we specialize in silent chain, also known as inverted tooth chain, we understand how important it is to choose the right chain and sprockets for each application. We also understand that practical, cost effective, solutions are important to every customer. With this in mind, our trained sales and engineering staff is here to assist you in selecting the solution that will best meet your needs. If a job can be done with silent chain, we will help find the best chain for the job, at the lowest possible cost.
With warehouses and representatives around the world, we welcome the opportunity to serve you.
|
|
| Contacted SARONTECNICA S.r.l for greater details. |
|
Features:
- Length range : 250 to 1000 mm
- Single or three phase asynchronous motor, 2 or 4 poles
- Power: 10 W to 80 W
- Speed : 3 to 47 m/min
- Steel or plastic gear
- Class F insulation
- Thermal cut-out
Options:
- Stainless steel, galvanized steel tube
- Special coatings
- Conical, bi-tapered machining
- Roll length
- Cable length
- Special voltages
- IP54 protection, other IP on request
- Plastic or aluminium end fittings
- Axial or radial cable outlet
- Brake
Contact us to optimise your installation using frequency inverters.
|
|
Mink MBS-System (MBS) - The next best thing to floating
The Mink MBS-System is superior to conventional conveyor belts, which explains why this concept is preferred by customers in so many different industries. This modular brush conveyor belt can handle products of every conceivable kind, while preventing damage and avoiding contamination and noise. The bristle surface can be adjusted to the required degree of gentleness. If repairs become necessary, individual modules can be replaced quickly and easily. The belts are highly resistant to acids, alkalis and heat.
Advantages:
• Gentler than conventional conveyer belts
• The ideal way to convey products that are susceptible to dents and scratches on inclines
• Quick and easy assembly
• Superior technology at an attractive price
• Low noise
• Dirt falls between the bristles, no damage to surfaces
|
|
KettenWulf develops and produces special conveyor and transport chains in all designs and dimensions. Moreover, we manufacture standardised chains to DIN and ISO norms. Our standard delivery programme includes:
» Bushed conveyor chains according to DIN 8165
» Bushed conveyor chains according to DIN 8167
» Conveyor chains with hollow pins according to the former DIN 8165
» Conveyor chains with hollow pins according to DIN 8168
» Deep links chains according to DIN 8165
» Deep links chains according to DIN 8167
» Trough conveyor chains according DIN 8165
» Trough conveyor chains according DIN 8167
» Galle chains according to DIN 8150
» Draw bench chains according to DIN 8156
» Draw bench chains according to DIN 8157
» Pinions
» Hinged gear racks
» River gate chains
» Block link chains |
|
Carbon steel is the primary choice when a scraping blade will be in contact with the belt. The material hardness, thermal properties and magnetic characteristics of Carbon Steel provide unique features that are beneficial in a wide variety of material processing applications.
Belt Technologies Carbon Steel Process Belts are uniquely suited to the baking and chocolate industries. These belts feature remarkable wear resistance, and allow for easy system cleaning and sanitizing.
|
|
Sandvik 1100C is a carbon steel with a hard, smooth surface and a
black oxide layer, which makes it suitable for any application with
a low risk for corrosion. Very good thermal properties make it
ideal for baking and for heating and drying of liquids, pastes and
fine-grained products |
|
Conveyor Belt - Heavyweight
Under the toughest conditions, Goodyear Engineered Products' heavyweight conveyor belts don%u2019t just keep you running, they keep you running more profitably. With superior performance, we help you achieve lower cost-per-ton conveyed for a wide variety of above and below ground applications. With our top-tier distributor support, which includes online software that monitors your belt%u2019s integrity and performance, you get the most out of every belt we make.
Conveyor Belt - Lightweight
Designed to meet the demanding requirements for a wide variety of industries and applications, Goodyear Engineered Products lightweight conveyor belt gives you heavyweight results. From check-out counters and package handling to exercise equipment, our lightweight conveyor belt is made to order to meet your specifications in size, fabric, compounds, colors and top cover profiles. With Goodyear EP quality built into every belt, they%u2019re made to last.
|
|
Goodyear EP's Solar-Shield heat belt is offered with Polyester/Polyester, Polyester/Nylon and Fiberglass fabric reinforcements. It offers high performance in extreme hot material applications. The fiberglass option offers the highest degree of burn-through resistance of any current available fabric reinforcement.
Heat-resistant cover resists cracking and hardening
Solar-Shield belting performs over the long run, retaining its flexibility despite punishing conditions and loads. Less cracking and hardening translates into longer life and reduced replacement costs.
High-temperature resistance to tearing and abrasion
Load after load, Solar-Shield stands up to prolonged exposure. This reduced maintenance and downtime helps lower overall operating costs.
Innovative Solar-Shield cover compound
Solar-Shield belting provides superior performance under extreme heat conditions. The Solar-Shield (EPDM) compound retains its heat-resistant qualities after prolonged exposure to 400°F hot loads.
Synthetic carcass construction
Solar-Shield's synthetic carcass provides great dimensional stability and strength at high temperatures and operating tensions up to 1200 PIW.
Solar-Shield carcass with fiberglass reinforcement
Fiberglass reinforcement throughout all plies of the carcass provides maximum protection when temperatures are not constant. The carcass stands up to "hot shots," resisting burn-through up to 1000°F.
Applications:
Steel Mills
Cement Clinker
Coke Plants
Taconite Pellets
|
|
Coal Quest
Goodyear EP's exclusive, patented, polyester x nylon Triple-Warp fabric weave makes Coal Quest the belt of choice for abusive underground applications.
Contender®
Goodyear EP’s Contender® is a specially designed construction that’s built to handle rugged underground mining conditions.
Glide® Plus
Goodyear’s Glide® Plus offers excellent rip and tear resistance, adhesion, flexibility and splice retention.
|
|
CSA 450S1 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
MSHA 330S3 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
MSHA 350S1 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
MSHA 450S1 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
PVIM 450S1 NNb
This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
|
|
Goodyear EP's Plylon is a poly/nylon reinforced conveyor belt that provides an economical alternative to Plylon Plus® in less-demanding applications.
Excellent fastener holding retention
Plylon belt constructions offer superior mechanical fastener holding. Heavy polyester/nylon cords positioned for maximum strength resist fastener pull-out even in abusive conditions.
Reduced stretch
The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear representative to calculate permanent and elastic elongation requirements for your specific systems.
High-strength crimped cords absorb impact
By straightening on impact, the crimped warp cords enable the fabric to absorb impact loads and resist tearing. Plylon belting maintains the integrity of mechanical or vulcanized splices under demanding conditions.
Polyester/nylon fabric carcass (110 lbs. per ply)
Plylon belting is designed to handle sand, gravel and small stone applications. The polyester-nylon fabric reinforcement provides greater breaking strength, impact and tear resistance than competitive brands.
Applications:
Stacker Conveyors
Trash and Recycling Plants
Ready Mix
Block Plants
Wash Plant
Load Out
Radial Stackers
|
|
Goodyear EP's premium all-purpose fabric conveyor belt construction can be used in a variety of industries and applications with most of Goodyear EP’s exclusive rubber cover compounds. This product has proven itself successful since its inception in 1995.
Excellent rip, tear and impact resistance
Specially designed crimped warp cords straighten on impact and then recover their original shape. This enables the fabric to absorb greater impact loads and resist tearing for long-lasting durability and lowest cost-per-ton conveyed.
High ultimate strength
Plylon Plus withstands severe tension spikes at start-up, retains mechanical fasteners and withstands continuous flexing around pulleys. This higher ultimate strength makes a critical difference in abusive operating conditions.
Reduced stretch
The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear representative to calculate permanent and elastic elongation requirements for your specific systems.
Applications:
Primary Crushers
Secondary Crushers
Pit Belts
Stacker Conveyors
Mainlines
Coal Prep Plant
Ship Unloaders
Log Decks
Log Debarkers
Trash and Recycling
|
|
|
As the leading manufacturer of high quality process belts Berndorf Band takes a mayor role in the development of various innovations together with the most important press manufacturers.
|
|
PVG 120S1 ZBb-1
Goodyear EP's exclusive Z-Belt continuous profile belt will quietly pass the competition. Z-Belt allows for increased product carrying capacity and greatly reduces the vibration and noise level on return idlers. An additional feature allows better drainage when transporting wet materials. This belt is ideal for conveying fertilizers, grains, oily products, agricultural produce and animal feeds.
PVG 150H2 ZBb-1
Goodyear EP's exclusive Z-Belt continuous profile belt will quietly pass the competition. Z-Belt allows for increased product carrying capacity and greatly reduces the vibration and noise level on return idlers. An additional feature allows better drainage when transporting wet materials. This belt is ideal for conveying fertilizers, grains, oily products, agricultural produce and animal feeds.
PVG 150H2 ZFb-1
Goodyear EP's exclusive Z-Belt continuous profile belt will quietly pass the competition. Z-Belt allows for increased product carrying capacity and greatly reduces the vibration and noise level on return idlers. An additional feature allows better drainage when transporting wet materials. This belt is ideal for conveying fertilizers, grains, oily products, agricultural produce and animal feeds.
PVG 220S2 BBb
This plied belt has been specially designed for recycling, agricultural and industrial applications for conveying of oily products, grains, feeds, fertilizers, agriculture and produce. The moderately oil resistant PVG compound provides low temperature capabilities and resistance to slider abrasion. Unique HPC technology delivers superior tracking performance and thermo-flo splicing possibilities.
PVS 150H2 RBb
Unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. State-of-the-art HPC technology delivers superior tracking performance, resistance to edge wear and flexibility over small pulleys. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.
|
|
POWER CURVE® Chain:
This chain is manufactured using a pin which is both smaller in diameter and slightly longer than its Standard Series version. This design allows for extra clearance between both the pin and the bushing and in overall chain width as well
Plastic Film Feeder Chain:
These special chains are designed for thermoforming applications and unusual conveying applications such as creating polystyrene plates, shrink wrap, blister packs and many other plastic items. The chain features precise, pointed link plates combined with extended pins or straight attachments (for additional rigidity in operation) which make them ideal for conveying plastic film into thermoforming operations. Three models are available for your conveying needs
|
|
Hangzhou Donghua Chain Group Co., Ltd is the biggest chain manufactory in China. This company is specialized in producing all kinds of standard chains and special chains, e.g. A or B series chains, automobile chains, stainless steel chains, combine harvester chains, heavy-duty cranked link transmission chains, stereo garage chains and maintenance-free chains etc.
If you are interested in our products please feel free to contact us by e-mail: zhangxb@dhchain.com
|
|
KettenWulf is the leading manufacturer of high-quality conveyor and transport chains. Our products have a wide range of applications in various industries.
As our customers have widely varying requirements, KettenWulf generally provides individualised services in its product division conveyor chains. Our engineers and technicians develop special conveyor and transport chains that are customised to suit your needs.
KettenWulf develops and produces special conveyor and transport chains in all designs and dimensions. Moreover, we manufacture standardised chains to DIN and ISO norms. Our standard delivery programme includes:
|
|
|
