|
|
For applications where metal belt fasteners can't be used, the Alligator® Plastic Rivet Fastener System is a long-lasting, easy-to-install solution for light-duty applications. Our sturdy non-metallic fastener is also a low-cost alternative to the time and expense associated with vulcanization.
Fastener plate leading edges are beveled to ensure a smooth, low-profile splice. The one-piece fastener features an integrated design with rivets molded right into the fastener top plate - fast belt replacement means reduced downtime and increased productivity. Plus, the smooth surface is easy to clean.
Design permits use on applications with minimum pulley diameters as small as 1-1/2" (38mm) and on belts 1/32" to 1/8" (0.8-3.2mm) thick.
Choose the material that matches your application. UV-resistant black delivers extended life in outdoor applications. FDA-accepted white plastic is suitable for food and pharmaceutical processing applications, and resists weak acids, alkali, hydrocarbons, ester solvents, and alcohols. Both materials can be used in applications from -20°F to 180°F (-29°C to 82°C). |
|
| Contacted SARONTECNICA S.r.l for greater details. |
|
880 LFA
Low Friction Acetal Resin
• Plates in self-lubricating low friction acetal resin, light brown-coloured.
• Pins in chrome-nickel austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance.
880 WR
Wear Resistant resin
• Plates in thermoplastic wear resistant resin, black-coloured.
• Pins in chrome-nickel austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance. |
|
| ... products without technical information |
| |
Many decades of experience are incorporated in the centrifugal pumps from Lutz-Jesco. Special varnish layers and highly resistant materials guarantee highest reliability and long service life, even with most aggressive media. The product range includes motor pump units as well as standard pumps for many possible fields of application.
The chemical centrifugal pumps form Lutz-Jesco have been developed particularly to be used for industrial applications and are thus espcially sturdy and have a long service life - also in the case of most aggressive media and high-duty operation.
Chemical motor pump units BN are single-stage, normal-priming pumps with horizontal axis. They are supplied completely with motor for a fast and easy installation into the piping system. Suitable for capacities of up to 100m3/h. |
|
Thermoplastic vertical centrifugal pumps conceived for industrial applications, production lines and ecological facilities where resistance to chemical aggression must be coupled with reliability and easy maintenance.
Their particular construction eliminates the possibility of any contact between metal parts and the liquids, while the selection of materials and manufacturing technologies guarantees compatibility with the products handled a long operating life and conformity with the standards in force. The adoption of pumps with these characteristics eliminates, even in case of breaks, hazardous leaks and the need for openings on the bottom of the basins or tanks, allowing the absolutely safe pumping of chemical substances. |
|
| Sealed pumps, close-coupled execution. They are identical in the hydraulic parts to the ZMF model (Frontiera range). This pump range installs motors with special longer shaft with the advantage of a cheap and simple construction. |
|
Series 9000P-O
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.
The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.
|
|
| Centrifugal chemical pumps moulded in pure thermoplastic material with many executions to offer different applications for pumping chemicals in the most efficient way. Innovation thanks to stainless steel use in the pump body as reinforcement. The stainless steel is also used for the coupling guard and the base plate all according to the ISO norms. The employed material and external structures are identical for the whole project Frontiera. The inside solutions and type of motor connection are different. These pumps can be sealless or sealed; close coupled or long coupled executions. |
|
Verdermag mag drive centrifugal pumps
Verdermag mag drive pumps
The Verdermag series of pumps comprises the metallic Global models complimented by the non-metallic V-MD, GPMD, GLMD, TB and U Series, as well as the Global mag drive metallic series. The Verdermag range is therefore a complete, well-balanced series of magnetically coupled centrifugal pumps.
As with all series of Verdermag centrifugal pumps, current emphasis is on maximum interchangeability and quality improvements, hence all our products are covered by a two-year guarantee. Our motto is "simple by design."
Advantages Verdermag
- Zero leakage
- No mechanical seals or packed glands
- No external flushing systems
- Ensure a clean and safe operating environment
- Close coupled design
- No alignment required
- Increased Mean Time Between Maintenance
|
|
| Horizontal plastic Centrifugal self-priming Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution |
|
| ... products without technical information |
| |
ALMATEC's A-Series made of plastic has been developed on the basis of extensive experience in the production of pneumatic diaphragm pumps and offers numerous advantages meeting market requirements.
Six sizes with max. delivery volumes of
0,6 m³/h (A 08)
1,2 m³/h (A 10)
3 m³/h (A 15)
6 m³/h (A 25)
18 m³/h (A 40)
32 m³/h (A 50)
make it possible to choose exactly the right pump for the specific application.
A variety of materials is available for the A-Series pumps:
Housing - PE, PE conductive, PTFE, PTFE conductive
Diaphragms - EPDM, PTFE/EPDM
Ball valves - EPDM, PTFE, stainless steel
Cylinder valves - PE, PTFE
A-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.
|
|
For a pump that can pass the acid test, consider the Marathon® M Nonmetallic Pump Series. Rugged, all-bolted construction. No clamps. Models in PVDF, Nylon, Conductive Acetal and Polypropylene. Specially-coated, chemically-resistant hardware. Optional spill containment and leak detection.
Product range from:
Pipe Size: .25" / 6mm
Displacement Per Stroke: .01 gal / .04 ltr
Max. Flow per Minute: 4 gal / 15 ltr
Max. Solids Handling: .03" / 1mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
To:
Pipe Size: 3" / 80mm
Displacement Per Stroke: .9 gal / 3.41 ltr
Max. Flow per Minute: 238 gal / 901 ltr
Max. Solids Handling: .71" / 18mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
|
|
The bellows pump is a pneumatic, self-priming pump. The fluid is pumped between the two chambers, airside and liquidside. This pump is adact for to transfer of ultrapure acids and solvents used in the semiconductor industry.
Their pumping frequency is much lower than an equivalent diaphragm pump and results in an extended life. Due to this low frequency and amplitude of the bellows pump, we guarantee a lower level of particle contamination. All PFD pump wetted components are manufactured with TEFLON® (PFA HP, PTFE and FEP). All other components are manufactured with high technology materials; e.g. PVDF and PEEK.
The use of material chemically inactive allows no ionic contamination. This pump is assembled in cleanroom.
Flow rate: 20 l/min
Max. suction head: 3,5 m
Max. air pressure: 5 bar
Max. back pressure: 4 bar
Max. air consuption: 13,5 m^3/h
Max. air connection: 4 mm I.D.
Weight: 4 kg |
|
| ... products without technical information |
| |
With its ranges WINNER and NORMAPROFIL, MECANUMERIC offers to you various solutions for the applications of machining 5 axes.
Range NORMAPROFIL is intended for the machining of large thermoformées parts, rotomoulées, injected, and the manufacture of moulds and large-sized models.
The range WINNER which uses the architecture of the fixed gantry with a mobile table will be used for the applications of machining 3D of precision.
Many formats useful (X, there, Z) since 1000 X 700 X 600 mm for 3750 X 2250 X 1380 Misters. |
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information. |
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information. |
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information. |
|
Machining centres of the M 7/MM 7 series are designed for highly dynamic
finishing of moulded parts and panel components made of aluminium,
thermoplastics or duroplastics as well as for the machining of hard foam
blocks. The machine concept stands for highly dynamic rigidity and meets the requirements for top machining quality with maximum feed rates.
This series guarantees availability and economic efficiency thus being profitable even for users with small-quantity production. The tandem table technique allows alternating operation and minimizes downtimes for loading and unloading of the workpieces. Both tables can be coupled for the machining of large workpieces. |
|
For materials like as Nomex, Kevlar, Aluminium usw.
Shafts / receptions.
Circle-knives.
Special-circular saw-leaves.
|
|
|
|
see the results for the following category
