|
|
Application:
•Decentralized motorization of loads < 500kg (cardboard boxes, trays, totes…) for conveying systems where there is no risk of accumulation
•Regulation for speed in gravity roller conveyors, access gate, bridging between conveyors, 90° transfers, powered roller bends…
•Applicable to all industries (automotive, electronics, mail …) for assembly lines and transfers
Benefits:
•Safety (no exposed transmissions)
•Comfort/Ecological (without oil bath)
•Modular & flexible conveyor zones
•Space saving
•Quick and simple installation removing the need for maintenance (no exposed transmissions)
Concept and characteristics:
•The AC asynchronous motor and the life lubricated planetary gears and bearings are integrated inside the roller tube to drive the loads directly
•Internal shock absorber protects the gearbox
•Continuous or intermittent duty cycle (720 start-stop/hour)
•Speed from 4 to 50 m/min
•IP54, 55 and 65, clean room
•1phase or 3 phase, 50 or 60Hz, from 100 to 440V
•option : accumilation motor or brake motor
AC 1phase & 3 phase range:
•Ø 50 standard: series K
•Ø 57 standard: series A
•Ø 60.5 standard: series B |
|
Conveyor Roller
Driven and non-driven Conveyor Roller Accumulation- and Positive Drive.
Available in Steel, Stainless Steel, Aluminium und Plastics.
Steel Conveyor Rollergalvanized, epoxy resin coated, surface hardened, coated with PVC, PU or Rubber.
Abridgement of the Range:
Gravity Roller
Driven Roller
Conical Roller
Drum Motors
Conveyor Belt Drums
Belt Station Roller
Brake Roller and Brake Conveyor Roller
Skate Wheels
Universal Wheels
Pallet Rails
Chain Slide Bar
Zero Pressure Systems
Tooth Belts
and a lot more
|
|
Concept and characteristics:
• The brushless 24V DC motor 1 and the life lubricated planetary gears and bearings 2 are integrated inside the roller tube 3.
• A circuit board drives the motor offering different control options (see “circuit board” section)
• Suitable for a host of environments: industrial, humid, dusty, wet, oily and clean rooms (IP54, 55 & 65)
• Continuous or intermittent duty cycles (1800 start-stop/hour)
• Speed range from 4 to 65 m/min
• Speed variation: see “circuit board” section
• Available with dynamic break and mechanical brake |
|
| ... products without technical information |
| |
| Indicated for the grit-blasting to passage of outlined and sheets without length limits. Pieces come dealt on 360° in a single passage. |
|
Free-flowing machine with rollers is used for continued shotblasting of the corroded layer and filing from sheet metal, sections, simple constructions and small shafts. Treated objects move through the machine on a roller conveyor.
One type of shotblasting machine with roller conveyor is free-flowing machine for blasting cylindrical elements. This machine is used for continued shotblasting of the corroded layer and filings from tubes' surface, round sections, gas steel bottles and other cylindrical elements. Treated objects move throug the machine on a conical cylindrical conveyor or on conveyor with askew wheels.
These machines may be built into highly productive lines for basic colour application, including drying chamber, automatic colouring chamber and drying tunnel. |
|
Conscious that all the machines are not used in 3x8, Wheelabrator Group designed a shot-blasting machine specifically adapted to the intermittent uses out of metal frame.
The conveyer shot-blasting machine with rollers RB 1500 SmartLine is equipped with 4 turbines high-output Roto-jet judiciously laid out, which allow a cover to perfect sections posed with the horizontal heart. Once granulated, the sections pass in a hopper of brushing-blowing controlled in height, which make it possible to evacuate all the shot of the sections. Those leave the machine clean and vacuum-cleaned.
When designing its machine, Wheelabrator Group stressed the robustness, reliability, and the maintainability of its machines. |
|
Three series of shot blasting machines
For Pre fabrication shot blasting we offer our series Sprint and Marathon,
for Post fabrication the Triathlon is optimally suited.
In each case it is possible to extend the machine to a complete surface treatment line.
Sprint
The Sprint is our standard model and is ideally suited for shot blasting steel plating, profiles and pipes. The turbines are placed perpendicular to the direction of the conveyor to achieve the highest quality of cleaning.
The Sprint range is often used by steel trade and construction companies.
Marathon
Designed for more demanding work, the Marathon range is ideal for higher conveyor speeds and heavier loads. It is typically used by larger steel traders or steel constructors working multiple shifts and by rolling mills.
Thriathlon
The Triathlon is designed for shot blasting steel constructions. Its turbines are placed diagonal to the conveyor direction to ensure it reaches all angles and crevices of the construction.
These machines are used in many steel construction companies.
The Triathlon is universally applicable and can also be easily applied to plating, profiles and pipes.
Surface treatment line
The GIETART surface treatment lines are the extension of the well known solid and reliable GIETART shot blast machines to a complete surface treatment installation including pre heating, shot blasting, painting and drying. GIETART specialises in the design and supply of complete steel surface treatment systems and every layout engineered by GIETART is custom tailored to the specific operations and requirements of our customers.
|
|
| Grit blasting machines for plates, sheet irons, beams and structures with roller conveyer for plates,sections and structures. |
|
Batch terminal
The batch terminal serves for the stacking of big packages for the laminated storage in trucks or journals and is offered as accessorie for conveyor belts,
weight categories up to 100kg per package
vertical lift up to 4 meters
dimension of the packages: from 400mm x 400mm x 400mm up to
1200mm x 1200mm x 1600mm
It is also possible to link it in manual workspaces. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Demag LRS travel wheel system:
The Demag LRS travel wheel system is a robust, universal travel wheel system for a wide range of applications. It is designed for travel applications with wheel loads up to 6.5 t (at 100 m/min) and travel speeds up to 240 m/min. It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. |
|
| ... products without technical information |
| |
|
|