|
|
Rockline® RBP1 Belt Positioner
The Rockline® RBP1 Belt Positioner™ is the simple, reliable solution for problem belts that continuously mistrack to one side of the conveyor. The Belt Positioner works on the return side belt using simple angled rollers mounted in a fixed position to quickly and continuously funnel the belt into the correct path.
The RBP1 Belt Positioner’s innovative design does not rely on a pivoting mechanism to move and steer a wandering belt like conventional tracking units. The RBP1’s two idler rollers are adjusted to the belt and create a funneling action that continuously "positions" the belt into the correct path. Many times in as few as 5 revolutions of the belt the results can be seen. Plus, the idler rollers on the RBP1 make smooth contact with the return side belt’s bottom cover and not on the belt’s edges which can cause excessive wear and damage to the belt.
Installed before the tail pulley, the Belt Positioner keeps the belt centered at its critical loading point. The RBP1 can also be used at the head pulley, before or after the take-up pulley or anywhere on the return beltline where there is a belt tracking problem. It can also be used on reversing belts.
The RBP1 Belt Positioner comes assembled and ready to install. Simply preset the unit for the conveyor structure width, position the unit on the belt and bolt or weld in place. Adjust the rollers to the belt and watch the results. |
|
Rockline® RMC1 Skirt Clamps provide the cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs. It stops material loss, eliminates safety hazards and reduces wear and premature failure of conveyor components. RMC1 Skirt Clamps are designed for easy installation, quick maintenance and years of service.
RMC1 Skirt Clamps come in a standard 4" (1200mm) length. An optional "Limited Space" (LS) model is available for tight chute configurations or for portable equipment. Also offered is a "Pick-A-Length" (PAL PAK) option for longer length or special length requirements. The RMC1 handles a variety of skirt rubber sizes. It can also be used with a range of skirt rubber thicknesses from 5/16" (8mm) to 3/4" (19mm).
The RMC1 features a no-hassle installation with few parts. First the clamp pins are positioned on the conveyor's skirt board and welded into place. Then the clamp plates are hung on the pins and the clamp bar and the skirt rubber are inserted. And finally, the clamp bar is tack welded to the plates.
All installation and maintenance work can be done safely from the sides of the conveyor. Just tap loose the locking wedges on the clamp pins, reposition the skirt rubber and relock the pins. The rest of the parts interlock so when the pins are unlocked, they remain in place supporting the skirt rubber while maintenance is completed.
|
|
The automatic adjustable product guiding system provides a flexible way to add fast width adjustment for conveyors in a production line.
The system offers quick and easy automatic resetting of product guiding systems in production flows. The effect is increased line efficiency and safe product distribution throughout the line.
The system has a modular design and consists of guide units for the guiding, controls for the control of the guide units and junction boxes for power supply. The system can be linked to the line control system and one control box can control up to 220 guide units.
|
|
| Thanks to a very large product range, an unceasing commitment to innovation, and extremely high quality levels, SEDIS is able to satisfy the requirements of the most demanding users |
|
| ... products without technical information |
| |
| ERNI offers the industry's widest array of cable housings, strain reliefs and guide elements. These complementary items to the DIN 41612 / IEC 60603-2 connector family are available for all of the popular types including B, C, D, F, H, Q and R and 1/2 sizes. The cable housings offer rear and two sided exit options, with strain relief for wire, jacketed cable or flat cables. The guide elements are available with keying and screw lock features for applications including: edgecards, backplanesm front panel, rear panel and other 19" Eurocard subrack mounting applications |
|
Richco offers a range of vertical, horizontal mount and tensioning rack card guides. Vertical design keeps boards in place, yet allows easy slide in and slide out. Horizontal guides are available with a funnel entry for easier board insertion, while others come with tension grips, applying spring pressure to hold the board securely in place.
In chassis and rack system applications, PCB access needs to be quick, accurate, safe and easily accessible to avoid damage to the components on board, which need to be utilised without compromising on overall performance.
The wide range of Richco card guides and pullers provide a solution to PCB safety access for when routine installation, maintenance and repair needs to take place. Custom parts are available. Please contact you local Richco office to discuss your requirements.
|
|
OILES LF Guide
Guide unit bearing
STANDARD PRODUCT
Guide unit interchangeable in dimensions with linear bushings
OILES LF Guide is a guide unit in which OILES Drymet LF and dust seal are structured in aluminum housing.
Features:
- Usable without lubricating because of OILES bearings.
- Usable in the vapor because of rustproofed aluminum housing.
- Excellent wear resistance and low friction coefficient.
- Easy to fix and interchangeable with ball type bearings.
- Realized low price owing to the simple structure.
|
|
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Press Dies and Plastic Mould. We delivery components europewide in averagely 6 – 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI – Precisely what you need. |
|
| Pacific Bearing offers a variety of shafting, rails and accessories such as Feather Shaft™, Feather Rail™, RC60 Steel, 440 Stainless Shafting, and custom options. |
|
LM76 offers extremely competitive pricing on all types of precision shafting: round, hollow, predrilled, continuous support extrusions, predrilled & assembled shafting. We specialize in standard linear shafting:RC60/Class L Linear Shafting, 300 series s/s Linear Shafting.
For most applications, RC60/Class L is the linear shafting of choice with all LM76 linear bearing styles: Minuteman, Ceramic Coated and FDA/USDA acceptable. |
|
Our manufacture are composed of:
Standard trees of precision CK55 ISO h6 62 /- 2 HRc
Chrome trees of precision CK55 ISO h7 62 /- 2HRc
Hollow shafts of precision CK60 ISO h6 62 /- 2 HRc
Trees of precision stainless 18% X90CrMoV18 ISO h6 55 /- 2 HRc
Trees of precision stainless 13% X46Cr13 ISO h6 53 /- 2 HRc
Standard trees of precision Inch CK55 ISO h6 62 /- 2 HRc
Chrome bars CK45 ISO f7
Chrome bars stainless AISI 304 ISO f7
On request we can manufacture all types of diameters, nuances and tolerances on minimum quantities
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
This system combines the ease, speed and tightness of bellows with the protective strength of a steel cover for large quantities of chips or hot chips even in difficult installation positions.
The special shape and function of this unique new system guarantee optimum protection without resilient or plastic deformation of the telescoping plates.
- Long service life
- Unique new "Wings" telescopic principle
- Ideal extension/retraction ratio
- Acceleration rates over 2 g (tested at 2.5 g)
- Highly flexible, creative and innovative covering concept
|
|
HEMA produces flexible protective systems for applications in widely differing industrial sectors. Apart from its core product of bellows, HEMA also possesses extensive specialist knowledge on various alternative solutions. High-quality steel covers are innovatively designed and efficiently manufactured by HESTEGO in a brand new production plant. The latest equipment and optimum processes guarantee constant, reproducible quality.
Whether providing new designs from absolute scratch, improving designs on existing cover applications, rebuilding old covers based on drawings or samples or refurbishing parts of damaged steel covers - HEMA does it all, in less time and at a low cost. Telescopic steel covers are the traditional form of cover for machine tools. They are used wherever an effective protection against the penetration of chips and other sharp-edged elements is decisive. The penetration of coolants can also be effectively reduced by design measures and suitable wiper systems. With their advanced technology, precise positional accuracy and high movement speeds, HEMA steel covers adapt ideally to the constantly rising demands of modern machine tools. |
|
Our advantages:
- Speed up to 150m/mn and acceleration up to 2g
- Liquid proof up to 100%
- Optimised use of space
- High durability
- Test-benches for standard components
- Certification ISO 9001-2000 |
|
The HS Series Hardened Way is offered in seven standard slide widths; 7, 9, 12, 15, 18 , 24 and 32" in base lengths up to 120" (3m) and saddle lengths to 96" (2.4m). These slides are available in standard and custom models and factory assembled. Hardened way slides are commonly used for stand alone machines, shuttle devices, and general feeding applications.
Standard SETCO HS slides are offered with a choice of saddle and base lengths in basic (no feed mechanism), ballscrew, hydraulic and air cylinder models
Custom HS slides are custom designed offering total flexibility in saddle and base lengths with a wider range of drive styles and accessories.
Standard Features:
100% Computer Designed Using 3D Solid Modeling
6 to 8 Week Shipment
Wide Range of Sizes and Accessories
Base Lengths in 3" or 6" Increments Up to 96"
Pre-Engineered Saddle Lengths
Designed and Built for Ease of Maintenance
Pre-engineered Base Widths: 7" thru 32"
Precision Saddle and Way Surfaces
Cast Iron Base and Saddle
Hardened Rails Manufactured for High Carbon Steel
and Case Hardened to 58/62 Rc
Hardened Rails Bolted and Chemically Adhered to the Base
TurciteTM Coating Lowers Coefficient of Friction
Way Wipers
Full Saddle Length Cast Iron Keepers
Full Saddle Length Adjustable Straight Gib
Porting and Oil Grooving
Base Mounting Holes
Standard Drive Packages: Basic (No feed Mechanism, Ballscrew and Hydraulic/Air Cylinder)
Product Service and Parts Manual
SETCO's Precision Slide Registration Certificate |
|
- Z-axis can be equipped with a MAX45B,
page 3.4, or turret head ETR 36, page 3.6,
which makes the TRIAX4 a self-contained,
high-performance and precise 3-axis CNC
machining center within a small envelope.
- Support base, table and slide base components
are made from stabilized GG-gray
cast iron with large ribs for added rigidity.
High-precision rails and precharged roller
bearing carriages, permanently lubricated
and ball screw assemblies are used as
motion elements.
- Support base of TRIAX4 can be mounted
from horizontal up to vertical position |
|
- Slide units type UA6 are high-performance, heavy-duty feed components; a suitable machining unit is a MAX200B, section 3.
- Slides are available in 3 x 2 versions: stroke 400 and 630 mm, prismatic guide-ways (GH) or roller bearing carriages (DH), hydraulic or CNC stroke, section 5.
- Options: Cam rail limit switch box up to 8 rails, front protection by telescopic cover, hydraulic guideway clamping (UA 6 GH). |
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired. |
|
Stainless steel lamella : particulary resistant to sparks and shavings.
Following application, we can offer others solutions |
|
Slide Valve (Pictured)
Slide Valve and Lock-Out Slide Valves
In the open position, slide valves allow air to flow through to downstream equipment in the open position. When in closed position, the valve shuts off the air from the compressor. Air trapped on the load side is then bled off into the atmosphere, preventing equipment from unexpectedly cycling even though the line is "shut off".
The lockout slide valves can be locked in the close position. This is an especially important feature when equipment or machinery is being worked on because it avoids accidental start up, which can cause injury to personnel. The lockout slide valve can accomodate standard lock shank sizes up to .145" (sold separately).
Other types of Valves that Coilhose Pneumatics offers:
Ball Valves
Safety Excess Flow Check Valve
|
|
Shut-off valves for bulk materials must close trouble-free in
the flowing bulk material and in the product column. The
slide gate should not jam or block, and the bulk material
should not be squeezed. Slide gates from Coperion Waeschle
fulfil exactly these requirements. |
|
| ... products without technical information |
| |
|
