|
|
PETER electronic has added the compact type series VersiBrake 230/400-25 L (LP) to its tried and tested product line of electronic DC brakes. The device, which features an upgraded power section designed for a rated device current of 25 A, is available either as a housing version or as a circuit-board version for rated motor currents up to 12.5 A. In preparation for the certification by the German Trade Association (Technical Committee for Wood), VersiBrake 230/400-25L (LP) already now meets the association's requirements for category 2 acc. to EN 954-1. VersiBrake 230/400-25 L (LP) features double safety protection: i.e., control via motor contactor and motor voltage detection. In addition, a surge suppressor circuit and a braking current infinitely variable between 0 and the rated device current reduces the failure probability of the braking device and thus indirectly that of the machines, too. An integrated overload monitoring function, which, if the braking frequency is too high, prevents motor restart, provides safety both for the VersiBrake and the operator. The integrated and adaptable motor standstill detection gives the user flexibility with regard to the motor types available.
|
|
- contains RM40, RM50, RM84, RM84 SMD, RM85, RM85 inrush, RM85 faston, RM85 SMD, RM85 105 °C, RM87, RM87 SMD, RM96, RA2, RM960, RMB961, RMB962, RM699V, RM699H, RM63, RMB631, RMB632, RM64, RMB641, RMB642, RM83, RM92, RM93, RM94
- Range of rated load: from 5A up to 16A
- Range of coil voltage: from 5 up to 220 V DC and from 6 up to 380VAC
- Assembly: plug-in sockets for DIN rail or for panel, PCB
|
|
|
Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available.
|
|
- contains RSM850, RSM850B, RSM822, RSM832, RSM954, RSM957
- Range of rated load: from 0,5A up to 5A
- Range of coil voltage: from 3 up to 48 V DC
|
|
|
Yaskawa's Bestact™ high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available.
|
|
The SK range for PCB mount is available in 2 cases :
SKA / SKB (AC output) or SKD (DC output).
SKA up to 6A 230 or 400VAC with built-in voltage protection, ideal for solenoid or motor control
SKB up to 4A 230 or 400VAC for resistive loads
SKD rated 3A / 60VDC or 1A / 200VDC
SKL for AC output with a ceramic substrate that can be mounted on a heatsink (see picture). The SKL range is ranging from 16A to 75A.
For the power element, our SKL use TMS2 technology (see the Power relay section introduction) reducing thermal stress and considerably
improving life expectancy. Ideal for motor control (I2t up to 5000 A2s) with high inrush current as well as heating application. Easy to protect
against short circuit with micro circuit breakers.
|
|
|
Electronic control circuits built on PCB’s demand relays that can be populated with the same machinery currently used in the production lines. The Magnecraft SIPS and DIPS are built in small industry standard package styles that do not require unique machinery to populate. The SIPS and DIPS can even withstand a lead-free solder re-flow process so a pin-thru-paste application is possible.
|
|
| ... products without technical information |
| |
-- Enhances Reliability for Portable Electronics --
The Conan 1.00mm mezzanine connector system provides a mechanically secure, high density electrical interface between parallel printed circuit boards. Conan’s mechanical features and palladium/nickel/gold plated electrical contacts qualify it for higher reliability use in portable and mobile electronic equipment.
-- Features & Benefits --
> "Click" engagement assures secure mating.
> 4.15mm low profile to 7.0mm PCB stacking
> 9 sizes: from 9 to 69 positions
> Blade-on-beam contacts allow “peeling”and prevent “stubbing.”
> SMT mounting with SMT hold-down for increased strength
> Mating polarization prevents backward connections
> PCB polarization prevents manufacturing errors
> Tape and reel packaging supports automated assembly.
> High Density 1mm Mezzanine PCB Connector SystemIdeal for Portable Electronics
For more information : www.fciconnect.com
|
|
- Card-to-Cable Connector
- Grid 2.54 x 2.54 mm
- 10-64 Positions
- Termination technologies: Solder-In, SMT, Press-In, Pressure, Pin-in-Paste
- Headers straight and right-angle
- Low Profile version available
|
|
- Card-to-Cable Connector
- Grid 1.27 x 2.54 mm
- Positions: 10/20/30/40/50
- Pin strip for SMT and solder wave
- Excellent Impedance values
- Outstanding contact properties (Contact resistance < 6 mOhm, mating force 0,18 N/Contact)
- Locking with plastic lever or metal clip
|
|
|
wiecon PC board terminals are a fixed component in innumerable innovative applications. Whether with screw or spring clamp connection, pluggable or in solder version - wiecon can be found wherever control systems are required. Unique marking, effortless wire connection and intelligent test functions guarantee service-friendly usability and reliable connections.
|
|
PCB plug-in connectors
The universal plugging system
For conductors up to 2.5 mm², the MULTI CONNECTOR SYSTEM provides all prerequisites for a continuous system wiring.
Applications:
PCB plug-in connectors
Feed-through plug-in connectors,
"Floating" plug-in connection for various mounting methods
Plug-in connectors on modular terminals
Benefits:
Original WAGO CAGE CLAMP® connection allows for fast, shock-proof and maintenance-free terminal connection. Depending on type, equipped with pin or socket connector
Operation with standard screwdriver
100% protection against mismating using coding fingers
Metric or imperial pitch
|
|
ODU – as a specialist for customized solutions have all key competences under one roof: design of parts, tools, manufacturing equipment, own tooling shop, molding, stamping, plating, turning, In-House-Design and manufacturing of assembly equipments.
With all these possibilities we are able to offer “customized” solutions for our customers.
Reasons for a custom specific solution are:
Function, Design, Exclusiveness, Costs
Examples for custom solutions: Connectors for Chip Card reader for diabetes device, Connector for Patient monitoring, compl. Industrial control and so on.
|
|
| ... products without technical information |
| |
More than 10 years ago CERATIZIT started the development and production of blanks for PCB-tools. CERATIZIT responds to the fast changing market and the growing demand for exquisite products by innovative grades and close partnerships with our customers.
Dimensions:
- due to a improved way of production CERATIZIT is able to offer and change between various diameters and lengths of blanks within very short time.
- standard size, as sintered: diameter: 3.25 +0,1 mm, lenghth: 38.30 -0 / 0,1 mm
Grades:
- a wide range of grades for drills and routers is available
- all CERATIZIT grades are considered as high-quality products and are well-known worldwide.
|
|
PCB Drill Blanks
Sandvik Hard Materials is the world’s largest supplier of the cemented carbide blanks used in PCB cutting tools.
The progressive miniaturisation of printed circuit board design requires ever smaller cutting tools.
In order to meet performance requirements in terms of wear resistance, rigidity and toughness.
Sandvik Hard Materials has specifically developed cemented carbide grades with an extremely fine grain size.
|
|
The 5800 Series Multi-Configuration Multi-Functional Test System offers:
• Combinational test platform.
• Three body styles: floor standing, benchtop or rack mounted.
• 21 slot PXI based backplane.
• 19 slots available for instrument cards.
• Automatic program generation software.
• Up to 3456 analog in-circuit test points.
• Separate user and personality power supplies.
The 5800 Series is designed to meet the ever-changing needs of today's fast evolving PCB manufacturing environment. Building on Aeroflex's long history of producing functional and in-circuit test machines, the 5800 combines both methodologies. The addition of PXI further increases the flexibility of this series of machines by enabling the user to implement solutions using not only Aeroflex PXI cards, but also cards from any PXI manufacturer.
|
|
Fault coverage and return on investment, two major factors affecting the choice of a test system in today's competitive markets.
Combine these with the flexibility to adapt as technology advances and you have the blueprint for the most desirable test system on the market.
From board to program - the solution
PinPoint II 14 slot, has been engineered to meet these criteria. It is the fastest, most economical functional test workstation available, giving the best return on investment in the industry whether configured for diagnostics or functional test.
PinPoint II has, in its high specification and modular design, the stride and flexibility to keep one step ahead of the fast evolving electronics market. It is equally well suited to `one-offs' as it is to production quantities and the combination of test technologies within the one powerful environment provides the key to the diverse range of applications the system is suited to. In-circuit functional test of both analog and digital components, edge card functional, VI analysis, boundary scan, PXI test and schematic reverse engineering can all be included in the same test platform. Flexibility extends further into the interfacing of the tester to the unit under test. The PinPoint II has been developed to adapt to the needs of the customer - clips, probes, edge connectors and bed-of-nails fixtures can all be used.
|
|
|
IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products
|
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System.
|
|
| ... products without technical information |
| |
The largest range from the industrial leader
For the connection of PCBs into their device environment, WAGO offers a large range of PCB terminals. For conductor diameters between 0.08 mm² and 16 mm², in metric or imperial pitches of 2.5 - 20 mm, or from 2.54 - 10.16 mm respectively, a suitable solution is found for everyone - of course in screw-free connection technology with CAGE CLAMP®, plug-in clamp or the versatile CAGE CLAMP® S connector.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category