|
|
| Paper roll clamps are an ideal tool to handle single or multiple paper rolls in horizontal and vertical position. Bolzoni Auramo paper roll clamp range comprises more than 300 different models, with maximum load capacities from 1.300 kp up to 12.000 kg, and roll diameters up to 2.700 mm. For a safe and non-damaging roll handling, a wide selection of accessories and contact pad options are available. |
|
| ... products without technical information |
| |
SITRANS FUS1020 offers reliable flow-measurement at a much lower cost than other clamp-on ultrasonic flowmeters, with flow rate accuracy of 1% or better for most applications. Available in single or dual channel configurations, in IP65 (NEMA 4).
|
|
SITRANS FUG1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. The meter is available in single, dual and optional four beam configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosion proof enclosures.
|
|
SITRANS FUS1010 is the most versatile clamp-on ultrasonic flowmeter available today. It can operate in either WideBeam Transit-Time or Reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single, dual channel/dual path and optional four channel/four path configurations. You have a choice of IP65 (NEMA 4X), IP65 (NEMA7) and IP66 (NEMA 7) wall mount enclosures.
|
|
SITRANS FUH1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. The meter has three application areas: Interface detectors, volumetric flowmeters and mass or standard volume flowmeters. Available in single, dual and optional four beam configurations, with choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) wall mount enclosures.
|
|
| The Series TFXL ultrasonic transit time flow meter is a reliable and cost-effective flow meter designed to replace mechanical meters where liquid conditions damage or impede operation. This non-invasive flow meter requires no maintenance, as it clamps on to the outside of the pipe. It provides a 4-20mA analog and simulated turbine meter frequency output, interfacing with a variety of monitoring equipment. The TFXL is available in an integral mount system for pipes size .5" (12mm) to 2” (50mm), and a remote system for pipes size .5" [12mm] and larger. |
|
KROHNE’s OPTISONIC 6300 stands for continuity and long term reliability. Flow measurement can be done anywhere and start-up is immediate. The new OPTISONIC 6300 clamp-on flowmeter with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling.
|
|
Our Innova-Sonic digital liquid flow meters are state-of-the-art universal transit-time instruments incorporating the latest advances in digital signal processing. The Innova-Sonic™ Portable Model 210 clamp-on features an industry-unique Bluetooth® wireless PDA interface for a truly flexible and convenient liquid flow measurement tool. Innova-Sonic™ Model 205 is our dedicated/fixed display readout version with non-invasive clamp-on transducers.
Our Innova-Sonic™ Insertion Model 205 features insertion transducers resulting in high signal strength in challenging applications and extremely large pipes.
While principally designed for clean liquid applications, all instruments in our Innova-Sonic family are tolerant of liquids with small amounts of air bubbles or suspended solids common in most industrial environments. All Innova-Sonic liquid flow meters offer low power consumption, high reliability and outstanding applicability at an economical cost.
UNIQUE PRODUCT FEATURES
- Accuracy better than +/-1%
- Wide operating temperature range -40F to +212F (-40C to 100C) (210 Innov-Sonic)
- One meter for a wide range of pipe sizes 1-200” (25mm-5000mm)
- 256MB Tungsten™ T5 PDA interface with Bluetooth wireless
- Numerical and graphical display interface
- Battery power supply with battery recharge port (including spare battery)
- Low installation effort and costs
- Wide bi-directional Flow range of 0 to 40 fps
-Measurement is independent of fluid conductivity
|
|
The FLUXUS ADM 6725 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, it is an ideal tool for service work.
The clamp-on flow transducers are simply mounted onto the pipe from the outside. Measurement is therefore non-invasive, and no process interruption is necessary for the installation. The transducers are not in direct contact with the medium to be measured and thus in no way submitted to pressure and wear and tear.
All transducer pairs are factory calibrated. All calibration data (including the transducer identification and parameters) is stored permanently in the transducers and is transferred to the transmitter automatically upon connection. This facilitates operation and a zeroing procedure is not necessary.
The user interface is adapted to the detected transducers. The instruments simply asks in a logical sequence for the pipe and medium parameters. The physical properties of a large number of pipe materials and media are stored in an internal data base. The status display enables even the inexperienced user to judge online the quality and precision of the measurement.
|
|
| The Preso ThermoTrack is a non-invasive ultrasonic flow meter combined with non-invasive temperature sensors, to measure energy use in water-based HVAC systems. No sensors come in contact with the liquid and there are no moving parts, so downtime and maintenance are eliminated. The flow meter utilizes transit time ultrasonic technology and the temperature sensors are Pt1000 RTDs. The flow rate, supply line temperature and return line temperature measurements provide the necessary inputs to calculate energy use, displayed in BTUs, Calories or Watts. The ThermoTrack is available for pipe sizes 1/2" (12 mm) and larger, with a variety of power supply and output options available. |
|
MINISONIC P is the new portable flowmeter of Ultraflux. Sturdy, light (850g) and water ingress protected, it is a real practical tool which warranties you quick, sure, accurate and bidirectional flow measurements of liquids. MINISONIC P is associated with clamp-on probes. These probes are easy to install without shut down of the process and no pressure drop.
MINISONIC P main advantages :
- large range of diamters : from 10 mm
- New measurement technology "ESC" (or Echo Shape Control) an ultrasonic signal auto-focus,
- 40 hours battery life
- very high amplification dynamic (89dB) and very efficient sounds immunity in difficult condition of measurement.
- an ergonomic keypad and menu calibration, back-lighted display
- measurement resolution < 0.1 ns
The measurement operating system software on PC allows the capture and the edition of the results |
|
SITRANS FUP1010 clamp-on non-intrusive ultrasonic flowmeter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam Transit-Time or reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single and dual channel or dual path configurations, with your choice of IP67 waterproof or IP40 (NEMA 1) enclosures.
|
|
SITRANS FUE1010 is a highly accurate clamp-on non-intrusive ultrasonic flowmeter for revenue grade thermal energy sub-metering and energy efficiency distribution monitoring, with a real time coefficient of performance (COP) for HVAC systems. The meter is available in single and dual channel or dual path configurations, with your choice of IP65 (NEMA 4X) dedicated wall mount or IP40 (NEMA 1) portable enclosures.
|
|
Based on the pneumatic clamp concept, this system is designed for better accessibility because of the narrow form.
The electrode arm opens to 90° allowing easy part load/unload thus eliminating additional slides or pivot units.
The welding clamp sits in a equalizing mount and generates welding forces of up to 600 kg.
Product Lines WS 63, WS 80 |
|
Vacuum fast fixings - Model FSV:
- To empty containers.
- No modification of construction necessary.
- Also for hollow surfaces.
- Very easy Handling.
- Ideal for pneumatic vibrators.
- Very low Consumption of air.
- Compact and rigid Construction. |
|
Product Overview :
The Optopatch patch clamp amplifier from Cairn Research is a general purpose amplifier, incorporating a number of unique features in order to optimise its performance across a wide range of applications. The amplifier is designed for patch clamp recording, with the unique addition of a lock-in amplifier to enable measurement of membrane capacitance and resistance. This built in device has a unique "track-in" mode that keeps the lock-in amplifier in perfect balance, maintaining discrimination between resistance and capacitance and providing linear calibrated resistance and capacitance outputs. The Optopatch includes several other unique features, including our patented optical technique for measuring small currents over a wide bandwidth (up to 200 KHz), and circuitry for protection against overcompensation of series resistance and electrode capacitance, safeguarding your cells during a recording.
Applications :
Single channel recording
Whole cell recording
High resolution capacitance measurement
Fast, high impedance amplifier
Voltammetry |
|
|
|
see the results for the following category
