|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
Built tough for the lift truck industry, Fleet Weigh is a rugged, fully immersible unit, (wash down friendly), with no easily broken plugs or wires.
Installation of Fleet Weigh is straight forward for a lift truck mechanic with basic electrical skills. It is installed without the use of laptops or other 'breakables'.
Operator and maintenance friendly - Fleet Weigh is a straight forward retro-fit to most industrial moving plant. |
|
The RWV Autonome RF is a set of weighing forks with high accuracy (maximum error 0.1% of the lifted load). The RWV Autonome RF combines the strong points of the RWV Autonome (functioning independently from the truck, simple installation) with the advantage of an indicator within reach in the cabin of the truck.
By pushing a button, net weights can be measured, or the weights of several pallets can be added up to a total weight per shipment. A printer can also be installed, for printing the weight data on a ticket. Signal transfer from weighing forks to indicator is by wireless (Bluetooth) connection.
|
|
Responding to the lift truck industry's request for a simple and economical lift truck on-board check weighing /overload safety readout that can be used in any material handling operation and will operate in severe working environment.
The ED2-Series SkidWeigh is the only forklift on-board check weighing system that is found to be installed in multiple quantities within the same company.
- Low installed cost
- Virtually maintenance free
- No operator training required
- Fully automatic
- Simple calibration with known load weight
- Operating voltage from 12 to 55 V DC
- Can be moved from one vehicle to another
- Will not reduce lift truck lift capacity
- Can be installed by a local lift truck service technician or the end user mechanic
- Resistant to industrial environments
- Field serviceable
- Wide range, check weighing capacity up to 50000 kg or lbs.
- Operating temperature ranging from -40°C to +85°C (-40 to 185° F)
- Accurate to /- .5 to 1% of vehicle lift capacity
- On-board printer capability, optional
- Accumulative weights capability, optional
- Overload strobe light warning, optional
- Dual weighing channel capability, optional |
|
Mobile Weight Cart
- Small and compact electronics specially developed fo mobile wighing.
- Highest level of water and humidity resistance.
- Smaller housing is more robust and withstands impacts and vibration better.
- One electornic board without connectors means reliability for many years in the hardest applications.
- Lower weight of the scale is self;122kg,means easier handling of the scale.
- More reliability for the hardest applications and environments.
- Lower power consumptions makes scale more user friendly.New batteries are only needed one time per year when weighting 10 pallets per day.
- 4penlight batteries can be changed without any effort.
- Auto shut off prevents the batteries to be discharged when client forgets to trun the in dicator off.
- Summation of weights with sequence numberallows verification if the total load has been weighed. |
|
| ... products without technical information |
| |
X-Ray Sensors offer a number of advantages over beta and gamma sensors, including greater precision, better streak detection, long-term stability and non-nuclear technology.
Since the X-ray sensor's energy output can be changed via digital power regulation, it can be optimized to run very efficiently over a wide range of product weights and thicknesses. |
|
Features:
Resolution: 0.1 µm
Linearity: +/- 1 µm (Diameter)
Linearity: +/- 0.5 µm (Position)
Standard gauge fingers for measure of diameters from 5 mm to 90 mm.
Watertight.
Measure of smooth or interrupted surfaces.
Gauge slides driven by air or oil.
Fine adjustment on slide.
Wearproof fulcrums.
Advantages:
Accurate.
Sturdy, suitable for installation on grinders.
Fits pre-, in-, and post-process applications.
Quick set-up and retooling. |
|
Features:
Overall dimension: 20x40x76 mm.
Measuring range: up to 12,5 mm
Repeatability: < 0,05 µm.
Connection to the electronics through cables long up to 30 m
Memory chip for process optimization.
Pneumatic recoil.
Quick manual retooling of the fingers.
Wide range of fixed or manually adjustable supports.
Fingers available with breakaway pin.
Advantages:
COMPATIBILITY
Fits all measurement applications related to:
- diameter
- position
on new or operating machines
No limits of installation due to the loss of the signal.
ACCURACY
Within the measuring range:
- sub micron, through automatic calibration on the master for every measure.
- micron, through automatic calibration on one master only for all measures.
PRODUCTIVITY
No manual retooling within the measuring range.
Quick manual retooling for adjustment to a new family of pieces.
Prevention from machine breakdown due to accidental impacts. |
|
Features:
» Handling of two LVDT transducers, for continuous and interrupted surfaces gauging.
» Compact size.
» Bench and built-in versions.
» Application customisation by the user through the set-up of:
- Gauging formulas;
- Arms ratio for self-learning;
- Metric or British measurement units.
» Analogue indicator for the continuous measurement
display, with x1 and x10 automatic scale change.
» Digital I/O, SINK or SOURCE type, for the connection to CNC/PLC.
» The operator's panel provided with sensitive waterproof sandwich keyboard allows:
- Setting the three gauging thresholds for the output contact;
- Setting the delay of cycle start input contact and zero quota output contact;
- Setting the zero correction value (offset);
- Selection of the reading of individual transducers for the mechanical manual zeroing;
- Measure electronic, manual and automatic zeroing.
» Memory and LEDs test performed at start-up.
Advantages:
» Accurate.
» Simply to configure and to programme.
» Can be integrated in any architecture both in a new machine or in an already operating machine.
» Comfortable to use.
» Tough and reliable.
» Affordable. |
|
Hydraulic Pressure Balance: up to 0,005% rdg.
Series MPA BLUE-LINE
Expanded uncertainty between 0,005% rdg and 0,075 % rdg.
- Errors electronic compensation
- Masses identification
- Automatic motor rotation drive
- Easily transportable
- Ranges up to 1200 bar
|
|
-Full hydraulic steering, power shift, hydraulic operation working device and flexible operation.
-Distinctive sturdy structure, excellent breakout force, shorter cycling time, high efficiency.
-High strength transmission shaft, high resistance against impacts, reliable constant power transmission.
-Air-assisted cover made by compound material reduces noise and vibration, and makes operation and maintenance convenient and flexible.
-Air pressure protection and emergency braking are integrated as well as safe and reliable.
-New cab features, wide visibility, sealed and vibration reduction, contributes to operator comfort. Cabs can be equipped with air-condition.
-Cummins diesel engine insuring maximum performance and efficiency.
Several attachments available: soil buckets of different sizes, snow-buckets, coal bucket, clamp, side dump bucket, and longer booms, make this machine ideal for different working conditions. |
|
-Optimum design and integrated working productivity tool, excellent dumping clearance, dumping reach, and breakout force; total cycling time is exceptional. Automatic leveling and overall superior productivity.
-ARTICULATED Center-point frame, small turning radius, front and rear wheels feature track reduce resistance and tire wear, maintains performance in all types of terrain.
-Fully hydraulic steering, power shift transmission, flexible operation.
-Key-black type propeller shaft, high resistance against impacts, constant power transmission which is highly reliable.
-Air-valve control type emergency brake system increasing safety.
-Integrated hood made of compound material, right and left access, auto-lock, reduced sound, easy maintenance and operation.
-Luxury full cab according to modern principals of ergonomics, excellent visibility. Optional air-conditioner provides operator with a comfortable job environment. |
|
-Full hydraulic steering, power shift, hydraulic operation working device and flexible operation.
-Distinctive sturdy structure, excellent breakout force, shorter cycling time, high efficiency.
-High strength transmission shaft, high resistance against impacts, reliable constant power transmission.
-Air-assisted cover made of compound material, reduces noise and vibration and offers convenience to both maintenance and operation.
-Integrated air pressure protection and emergency.
-New features in the cab, wide visibility, sealed and vibration reduction, offers excellent operators comfort. Cabs can be equipped with air-condition.
-Cummins diesel engine ensuring maximum performance and efficienc.
-Optional attachments available: soil buckets of different sizes, snow-buckets, coal bucket, clamp, side dump bucket, and longer booms, makes this machine adaptable to different working conditions. |
|
| High performance, reliability, ease of operation, toughness and good stability - these are the highlights of the Wheelloader series. Two lifting cylinders and the powerful tipping cylinder generate significant lifting and biting forces. The load arms are extremely rugged and torsion-resistant, and the polished kinematics guarantee good parallel alignment. Automatic return of tools to their working position is a standard feature of all Wheelloaders. The comfortable cab is easy to enter from both sides and offers an excellent all-around view through tinted, deeply extended windows. |
|
| High performance, reliability, ease of operation, toughness and good stability - these are the highlights of the Wheelloader series. Two lifting cylinders and the powerful tipping cylinder generate significant lifting and biting forces. The load arms are extremely rugged and torsion-resistant, and the polished kinematics guarantee good parallel alignment. Automatic return of tools to their working position is a standard feature of all Wheelloaders. The comfortable cab is easy to enter from both sides and offers an excellent all-around view through tinted, deeply extended windows. |
|
| High performance, reliability, ease of operation, toughness and good stability - these are the highlights of the Wheelloader series. Two lifting cylinders and the powerful tipping cylinder generate significant lifting and biting forces. The load arms are extremely rugged and torsion-resistant, and the polished kinematics guarantee good parallel alignment. Automatic return of tools to their working position is a standard feature of all Wheelloaders. The comfortable cab is easy to enter from both sides and offers an excellent all-around view through tinted, deeply extended windows. |
|
Wheel Loaders : WA900-3
Komatsu-integrated design
For the best value, reliability, and versatility. Hydraulics, power train, frame, and all other major components are engineered by Komatsu. You get a machine with components that are designed to work together to deliver higher production levels, greater reliability, and more versatility.
High productivity and fuel efficiency
High performance SAA12V140E-3 engine
Low fuel consumption
Dual-mode engine power select system
Automatic transmission with shift timing select system
Superior dumping height and reach
Standard, high-lift and Load & Carry booms are available in order to suit your application.
A full range of buckets and wear parts |
|
... see all the products in the category
Loaders
|
Conveyor beltweighers weigh and control continuous flows of bulk materials accurately and without inconvenient interruption.
Careful adaptation to the respective product characteristics is the basis for repeatable results.
• Flexible product range for almost all common belt widths; designs for use in legal metrology also available
• Adjustment, batching and loading control extend the field of application and provide optimized product flow and handling |
|
| ... products without technical information |
| |
|
|