|
|
|
|
|
|
Conax Technologies mineral insulated cable is manufactured using high performance/exotic alloys for critical applications where performance under extreme temperatures or severe environmental conditions is required.
Con-O-Clad, also known as mineral insulated cable, is produced to exacting standards controlled under our ISO 9001 Quality Management System. We use only the highest quality materials to ensure reliable and robust performance. Each completed lot of material undergoes strict quality assurance tests (electrical & dimensional) and is calibrated in our NIST Traceable Calibration Lab to ensure all requirements are met.
Sheath Materials:
Inconel, Monel and other Super Nickel Alloys
Haynes 188, 214, 230
Hastelloy C-276
Tantalum
Platinum-Rhodium
Sheath Diameters:
0.039" - 0.250" (1 mm - 6.3 mm)
Single and Duplex Constructions Available
Triplex Construction (Consult Factory)
Calibration Types:
Types K, N, E and S, R, B
Standard or Special Limits per ASTM E230
Class 1, 2 or 3 per IEC 584
Type C Standard Limits per ASTM E230
Insulation:
High Purity (99.4% Min) Magnesium Oxide(MgO) per ASTM E1652
Hafnium Oxide (i.e. Hafnia) for selected high temperature applications
Special Applications:
Compliance to ASTM E585 and E2181 Available
Supplemental NDT Testing Available
Can be supplied in a continuous length (coil) or cut to specific lengths and packaged for short or long term storage
|
|
B&B Thermo-Technik offers a huge range of cables for temperature measurement purposes.
Thermocouple Cables, compensation cables, and copper cables are available in various insulation and sheath materials. Thermo wires and thermo bands are also availbable. Just have a look at our temperature-shop:
www.temperature-shop.eu
where you find our standard range.
For further cables just send us an inquiry and we will supply you with a detailed offer.
|
|
Thin, flexible RTDs and thermocouples
Kapton, silicone rubber, Mylar insulation
All models available from stock
Benefits:
Fast response surface sensing in aerospace, medical, and industrial devicesRugged laminated construction
Simple to use: Just apply to the surface to be sensed
Models for point sensing or averaging over an area
Transparent insulations with fine wire element optional
Response as fast as 0.1 seconds!
|
|
The unique properties of XACTPAK mineral insulated, metal sheathed cable make it ideally suited to solve a wide variety of problem applications. The outer sheath protects the thermocouple from oxidation and hostile environments, and the mineral insulation provides excellent high temperature dielectric strength.
Features
* Diameters down to 0.25 mm (0.01 inch)
* Temperature ranges from 0 to 1480C (32 to 2700F)
* Cryogenic cable available upon request
* Fireproof
* High pressure rated
* Cold and thermal shock resistant
* Gas tight and moisture proof
* Formable and weldable
* Corrosion resistant
* High temperature rated
Applications
* Atomic research / nuclear reactors
* Blast furnaces / vacuum furnaces
* Catalytic reformers
* Diesel engines
* Food and beverage
* Glass and ceramic
* Heat treating
* Jet engines / rocket engines
* Medical
* Power stations / steam generators
* Refineries and oil processing
|
|
Thermocouple validation wire
Type 'T' thermocouple wire in Class 1 material and to BS EN 60584-1:1996 is supplied with a flat pair of PTFE insulated conductors and a PFA jacket. Conductor sizes are available in a solid 1/0.3mm and 1/0.5mm, or stranded 7/0.2mm formats and can be supplied in 100M and 300M reels.
These can also be supplied in pre-cut lengths, either with a bare hot junction or a Teflon encapsulated tip.
|
|
Since 1914, Watlow's SERV-RITE thermocouple wire and thermocouple extension wire have been known for premium performance and reliability. All Watlow SERV-RITE thermocouple wire is manufactured under ISO 9001 quality standards.
Watlow can custom manufacture thermocouple wire using alloys and insulation types to meet your specific application demands.
Features
* Insulation temperature ranges from -200 to 1290C (-328 to 2350F)
* Calibration certificates per AMS 2750, ASTM E207, E220 and E230
* Solid or stranded wire constructions
* Wide selection of insulation types
* Broad stock offering
* Select metallic overbraids and wraps
* Custom constructions available
Applications
* Aerospace industries
* Composite component manufacturing
* Automotive
* Cryogenic applications
* Electric power plants
* Food processing
* Glass, ceramic and brick manufacturing
* Laboratories
* Medical equipment
* Petrochemical
* Metal processing
|
|
Applications
Type RHTW High Temperature Wire is used for the internal wiring of ovens and other equipment operating at temperatures up to 1200F. Also used for electric heaters, blast furnaces, coke ovens, basic oxygen furnaces, and cement kilns.
Standard Features
Flexible, stranded 27% Nickle-clad copper conductor insulated with high temp composit mica/glass tapes and jacketed with an ultra high temp glass braid impregnated with a high temp finish. High Temp Wire listed by Underwriter's Laboratories, Inc. under Style No 5107 and rated at 450C and 600 Volts. Manufacturer rated 1200F and 600 Volts.
Options
Gaumer stocks 500 ft. rolls or will cut to desired length. Priced per foot with a 10 ft. minimum.
|
|
Validation Thermocouple Wire and Looms (VTFP):
It is a regulatory requirement when validating autoclaves and lyophilizers that Type T thermocouples of Class 1 material grade are used.
The VTFP validation thermocouple wire meets this requirement and is supplied either in pre-cut lengths from 1 metre upto 100 metre with a formed hot junction, the hot junction can be left bare or encapsulated in a Teflon tip. The cable can also be supplied on 100/300 metre long reels.
When considering the temperature mapping of large chambers and when multiple thermocouples are to be used, this material can be supplied as a cable loom. This approach eases the installation and general handling of multiple thermocouples and offers a more protective arrangement. All the conductors are identified with an ID number to ease location identity and connectivity.
When required the thermocouple cold junctions can be fitted with miniature or standard size thermocouple connectors.
|
|
Tempsens an ISO 9001 company manufacturers a wide range of compensating cables for thermocouples J, K, T, E, N, R, S, B Types.
Tempsens can custom manufacture thermocouple wire to according to specific application requirements.
Features:
- Different wire guage ranging from 14 to 36 Gauge(AWG/SWG)
- ANSI , DIN Color Coded
- Soild or MultiStrand wire construction
- Variety of Insulation type such as Single and double fiber glass, teflon, ceramic fiber, silica fiber, SS braided, PVC etc.
- Optional Stainless Steel and Tinned Copper Wire Overbraiding to give added protection from abrasion and mechanical damage.
- Single Core or Multicore cable can be provided.
- Detailed test report is provided for calibration traceability, materials, insulation resistance and physical properties.
|
|
|
|
|
|
Conax Design Solution: This product is a custom-designed hybrid of our Electrode Gland (EG) series and our Electrode Gland Teflon (EGT) series designs. We incorporated and combined positive features of each gland to benefit the customer in this application.
The EG offers high temperature resistance required closer to the heaters. The EGT offers more robust, less costly components for the balance of the assembly located where lower temperatures prevail.
The specially made solid nickel conductors are designed with staggered lengths to ease power cable attachment.
Benefits: Performance and longevity were improved with this design because the heating elements can function at peak performance at all times, reducing cycle times and down time. The few replacement parts required can be replaced on-site in the time it takes for the unit to cool down and be reloaded with new production material. The old design required a complete offsite rebuild over several months with a significant loss of productivity and a continuous performance degradation throughout its life cycle.
If you have a need to manage power or instrument leads into any type of an autoclave look to Conax Technologies for your solution.
|
|
Since 1984 B&B Thermo-Technik GmbH develops and manufactures successfully Thermocouple Connectors.
The high quality thermocouple connectors are available as Standard and Miniature Connectors. The connectors might be executed in plastic, high temperature plastic or ceramics.
Just have a look in our temperature-shop at:
www.temperature-shop.eu
There you will also find a lot of accessories all around connectors, cables, and temperature measurement.
|
|
|
Thermowells are designed to give protection against pressure and corrosion to the primary sensing element like bimetal and gas filled thermometers, thermocouples and thermo elements
|
|
Conax Technologies provides standardized wells in most of the common connection types, including threaded, flanged and socket weld types with standard bore sizes. Threaded wells are available in materials that can be readily welded. Flanged wells are manufactured by welding a bar stock well to the specified flange style. Doubled-welded construction reduces crevice corrosion and stress problems by ensuring that no open joints are exposed inside or outside the installation
Thermowells are pressure-tight receptacles that extend the life of a temperature in environments where the sensor is not chemically compatible with the process media or the sensor does not have the mechanical strength to withstand the process flow or pressure. Thermowells also facilitate removing, changing, checking or replacing sensors without draining the process system. The use of standardized thermowells throughout a plant permits easy relocation of sensors.
|
|
|
|
|
|
Applications:
- Petrochemical, On/Offshore, plant engineering
- For high process loads
Special Features:
- Heavy construction
- TW10-F: Full penetration welded construction
- TW10-P: Partial penetration welded construction ( filled a=3mm minimum)
- Available shank style: tapered, straight, stepped
- Welding certification acc. to ASME Section IX and AD2000 HP2/1 with DIN EN ISO 15614 part 1 for stainless steels and exotic alloys
Description:
- Thermowell material: Stainless steel 304/304L, 316/316L, 1.4571, 1.4404, A105, exotic materials
- Flange: Blindflange per ASME B16.5 / EN 1092-1 / DIN 2527
- Instrument connection: NPT, G female
- Bore size: 6.6 mm, 8.5 mm
- Insertion length U: To customer specification (max. 1800 mm for stainless steel)
- Head length H: To customer specification (standard: 57 mm, 83 mm)
- Options: Other flanges, dimensions, bore sizes and materials, Quality certificates, Extra long thermowells per IN 00.16 in multi piece construction
Wake frequency calculation per ASME PTC 19.3 are recommended in critical applications. WIKA offers this as an engineering service.
- This thermowell replaces the old models: SI400F, SI410F, SW400F
|
|
The TCIC is Low cost high speed 8 channels thermocouple measurement interface board with USB and RS-232/485 interface. The TCIC supports thermocouple types J,K,E,R,S,T or 500 millivolts at 1 microvolt resolution.
Main features:
On board cold junction compensation
On board temperature conversion functions enable stand-alone operation
USB interface as standard or USB + RS-232 /RS-485 (option)
Multiple boards may be connected via USB or RS485
8 opto-isolated outputs configurable as setpoints, latching alarms or user outputs
Comes with very useful software package and data logger
|
|
|
|
|
|
Temperature is the measured quantity number one worldwide in your application too? Then rely on MX1609 now, the new star for reliable and convenient temperature measurement.
MX1609 is part of the QuantumX family and offers many excellent qualities: Reliable temperature mea-surement using the proven and widely used type K thermocouple at the same time opening up fascina-ting new opportunities for your day-to-day measurement tasks
Test engineers worldwide benefit from HBMs APM technology (Advanced Plug and Measure) already today: Connect the transducer and get started immediately.
MX1609 now introduces APM technology into the world of temperature measurement too: The mini thermo-couple connector can be equipped with an identification chip which, however, can also be fitted later.
This chip enables your transducers to be automatically and unambiguously identified by the MX1609 as soon as they are connected. The days have long since gone when labels had to be attached to measuring points in a time-con-suming and error-prone process: MX1609 automatically puts your test setups in digital order.
Thanks to its compact design MX1609 perfectly fits even into the smallest test bench and thus can be installed very close to your measuring points.
Good for your test results the shorter the measuring cables, the smaller the influence of interferences. Mini format and giant performance! Each module provides 16 electrically isolated channels for recor-ding the signals of type K thermocouples in tempe-rature ranges from -100C up to +1300C.
|
|
Conventional methods of chamber entry for validation thermocouples allow only limited numbers of thermocouples to be used. They are relatively time consuming in their application and frequently prone to unacceptable leakage.
The TCEG/1 addresses both these problem areas by providing individual slots for 18 separate thermocouples and a rapid action, locking and securing mechanism.
By utilising a three part sealant arrangement the gland becomes a TCEG/2 with the opportunity of increasing the capacity to 36 individual thermocouples. Should even more thermocouples need to be accommodated, then a Y adapter connected to the chamber entry port can double both these quantities.
For mounting onto the autoclave chamber the TCEG is supplied with a Tri-clamp flange with the option of having a 1 or up to 2 flange.
The gland body is machined from 316L stainless steel with the cap in CZ121 brass. Sealants are in medical grade silicone to Shore 40 hardness and in accordance with FDA USP Class VI.
|
|
|
|
|
|
Omegas new Wireless Thermocouple Connector Series features stand-alone, compact, battery powered thermocouple connectors that transmit their readings back to a host receiver up to 120 m away.
Each unit can be programmed in the field to work as a type J, K, T, E, R, S, B, N or C calibration connector. When activated the connector will transmit readings continuously at a pre set time interval that was programmed by the user during the initial setup. Each unit measures and transmits: Thermocouple Input Reading, Connector Ambient Temperature, RF Signal Strength and Battery Condition to the host and is displayed on the PC screen in real time using the provided software.
When used with host receiver models UWTC-REC1 or UWTC-REC2 data from up to 48 wireless thermocouple connectors can be received and displayed. Each USB powered unit includes free software that converts your PC into a strip chart recorder or data logger so readings can be saved and later printed or exported to a spread sheet file.
The UWTC-REC2 also allows wireless data from one transmitter to be re-transmitted out of the receiver by a wired connection as an analogue voltage or current to interface with a controller, PLC or data acquisition board.
|
|
Roessel thermowells for highest demands are made from solid material. For less critical applications tube designs with weld-in bottoms are used.
We supply designs to all national and international standards, as well as special designs to customer specifications. Roessel thermowells are pressure-tested and can be supplied with X-ray certificate and/or official acceptance certificate.
|
|
Watlow manufactures and designs all types of thermowells. Our thermowell designs are representative of the types of basic styles in popular usage throughout the industry. Special designs, as well as modifications of our standard offerings are also available.
Drilled from solid bar stock, the thermowell protects the temperature sensor from corrosion, high pressure and high velocity environments.
Applications
Petrochemical
Chemical
Oil refineries
Power plants
Storage tanks and lines
|
|
Measure resistances, resistance thermometers, compensation cables, insulated cables and particularly insulated thermocouples must be fitted with a suitable connector for the industrial use.
The thermovoltage is measured in mV and V.
The LEMO connector is the ideal construction part for this technology.
|
|
Welded Type: WSF, WLF
Drilled Bar Stock Type: BSF,BLF,BTF,BTLF,BPSF,BPLF
Material: SS304,SS316,SS316L,Monel, Hastelloy C276, Brass, Carbon steel, Titanium (special material available upon request)
Process Connection: 1/2"~4" flange available, flange rating-ANSI,DIN,JIS available (special flange upon request)
Instrument Connection: 1/2"NPT, 3/4"NPT female available (specifal thread upon request)
|
|
Included in our thermowell series are standardized wells of threaded, ANSI flanged, Van Stone and Weld-in types.
Threaded wells are made in readily welded or brazed materials for installations requiring seal welding or brazing. The pipe thread provides the mechanical strength, the weld merely seals.
ANSI flanged wells consist of a bar-stock well which is permanently welded to a top quality flange. Standard construction uses primary "J" groove weld and a bevel groove secondary weld. Both welds are machined to produce a clean fillet. This double welded construction eliminates possibility of crevice corrosion since no open joints are exposed from either inside or outside the installation.
|
|
Build-up tube PN 25
Bar stock PN 100, stepped shank
Bar stock PN 250, tapered shank
|
|
|
|
|
|
We are specialized in manufacturing of Thermowells for all kinds of thermometers and temperature sensing elements. They are manufactured in high quality CNC machines to meet European / American quality standards .
Thermowells available are:
>> Threaded Thermowells
>> Flanged Thermowells
>> Stepped Thermowells
>> Vanstone Thermowells
>> Socket weld Thermowells
>> Weld-in Thermowells
Materials :AISI SS304, SS316, SS316L, SS310, HRS446, Inconel 600/800,Hastalloy,Monel etc.
Thermowells are also available in fabricated or drilled barstock Type.
Tempsens also manufacture special type of Thermowell on customer demand and as per application requirement .Such as:
- Metal Thermowells with Tungsten Carbide / Ceramic / PTFE / PVDF / PFA Coatings
- Thermowells with Solid Sintered Tungsten Carbide,
- Silicon Carbide ,
- Platinum Thimble
- Tantalum Thimble
- Nickle Cladding Graphite Thermowells
- IBR Stamped Thermowells
Thermowells designs depends on pressure and velocity.
Procedure and Certificate :-
A wide range of documentation and Non Destructive Testing can be provided on request
1. Material Certification
2. Certificate of Conformity
3. Hydrostatic Pressure Test
4. Dye Penetrant Inspection
5. Radiography
6. Ultrasonic Bore Concentricity Test
7. Positive Material Identification
8. Intergranular Corrosion Test
9. Hardness Testing
|
|
FT 4020 Flanged Thermowell
These thermowells are made from bar stock material acc. to DIN 43772 form
4F and have a welded process flange DIN/EN DN 25 to DN 50 ( ASME 1" to
2" ).
They resist high stresses caused by strong vibrations, flow rates, high pressures and temperatures.
Load diagram see DIN 43772
Length below flange and flange rating to be specified
|
|
| ... products without technical information |
| |
|
|
