|
|
Off line oil / air blast cooler BNK series
Integrated circulation pump
Low noise emissions
Easy to maintain
By-pass also available
High performance off-line coolers with compact dimensions, motor with two spindles for pump and fan. Matrix easy to dismantle.
|
|
|
|
|
|
Oil/air heat exchangers
type LKI
Low noise level
High performance
Low cost
Product description
With this new generation of Universal Hydraulik LKI oil-coolers, the manufacturers have succeeded in reducing the noise level. These coolers are ideally suited for stationary installations - for the cooling of hydraulic or lubricating oils. The range has been extended to include slow-running ventilators, and the housings have been optimised, in order to produce the very low noise level. In order to make the cooler range as comprehensive as possible, the smaller models are also available as single or dual versions, thus covering oil-cooling requirements for both low and high oil throughflow volumes.
Product features
Testing pressure: 26 bar static according to DIN 50104
Operating pressure: 16 bar
(min. 2 Mill. Cycles from 0-16 bar at 2 Hz and 60 °C)
Compact oil-cooler
High operating pressure
High cooling performance
Low pressure loss
Max. operating pressure: 120 °C
High flexibility
2" SAE flange from LKI 700 upward
Also for use with water/glycol
Variable motor; Hydro / 12/24V
|
|
AC Industrial Coolers (LAC) - Coolers with AC motors for industrial hydraulic systems
The LAC air oil cooler with single-phase or three-phase AC motor is adapted for use in the industrial sector.Together with a wide range of accessories, the LAC cooler is suitable for installation in most applications and environments. The maximum cooling capacity is 160 kW at ETD 40°C. Choosing the right cooler requires precise system dimensioning. The most reliable way to dimension is with the aid of Oiltech’s calculation program. This program, together with precise evaluations from our experienced, skilled engineers, gives you the opportunity for more cooling per pound invested.
|
|
The first choice for oil cooling in hydraulic circuits.
Your Advantage
The correct cooling solution offers a longer oil life, i.e. lower maintenance and change frequency. A constant oil temperature also means improved machine precision.
AKG-Range T1 - T 11... maximum working pressure 26 bar
AKG-Range TL1 - TL 6 ... maximum working pressure 14 bar
|
|
ASA 0177
- Working pressure (static): 26 bar (370 PSI)
- Radiator material: Aluminium
|
|
AIR-OIL HEAT EXCHANGERS -SERIES AP WITH HYDRAULIC MOTOR :
This type of exchanger has been designed for use on movable machines where battery feed is insufficient or when exchangers with direct current supply are inadequate to produce high thermic yields. The radiative unit is of aluminium because this material is a very good conductor; providing high thermic yields and relatively compact over-all dimensions. Thanks to the particular construction of the radiative unit the exchangers of the series APL cope well with water hammer conditions which, at peak values, must not exceed the minimum allowable dynamic pressure of 20 bar. The maximum allowable static pressure is of 35 bar.
|
|
Oil/air heat exchangers
type LKI-HYD
Low noise level
High performance
Low cost
With this new generation of Universal Hydraulik LKI oil-coolers, the manufacturers have succeeded in reducing the noise level. These coolers are ideally suited for mobile installations - for the cooling of hydraulic or lubricating oils.
|
|
Air oil cooler with hydraulic motor and industrial hydraulic systems
An air oil cooler fitted with a hydraulic motor for heavy duty applications with high cooling requirement. The Oiltech LHC air oil coolers are designed for industrial as well as mobile applications. Maximum cooling capacity 130KW at ETD 40°C
|
|
Oil/Air Heat Exchangers
Very low noise level combined with low costs in the model ranges
- LKI
- LKIHYD
- LKM
Up to 26 bar oil pressure, cooling capacity from 1.5 to 150 kW, respectively from 20 to 700l/min, oil flow. Optionally with bypass valve for pressure peaks. Various electric motors available.
|
|
TT 01 :
- Pression de service (statique): 26 bar
- Matière de l'élément refroidisseur: Aluminium
|
|
|
|
|
|
Airtech Aluminum Fan Cooled Units
Our line of Airtech Fan Cooled Heat Exchangers provides a standardized, reliable and self-contained solution for remote cooling requirements in both the Industrial and Mobile Vehicle markets. These compact, high efficiency Oil Coolers and Aftercoolers can be the perfect answer for applications where cooling requirements are remotely located, cooling water is unavailable or impractical, or where coolants may be subject to freezing.
These pre-engineered packages include an all-aluminum vacuum brazed bar & plate heat exchanger for superior durability and performance in a cost-effective, compact, light weight construction. Motors can be supplied in either 60 hertz or 50 hertz AC versions, or 12 volt DC versions. Both come complete with finger guard and shroud.
Our product range encompasses 11 different model sizes. The first 8 sizes are vertical mounts with horizontal air flow, while the three largest sizes are horizontal mounts with vertical air flow. The units come with a variety of standard options, ensuring our customer gets what they need with very short lead-times.
|
|
cooling power:1-250KW
application:hydraulic and lubrication oil cooling system
working pressure:10-26Bar.
Dc or AC drive
|
|
SELF-CONTAINED COOLING UNITS:
The RAS cooling units were engineered and manufactured to substitute the former GAR and OCS series with an uncomplicated and compact product. The units are made up of an aluminium air-oil exchanger and a single electric motor which operates both the oil circulation gear pump and the cooling fan.
|
|
TT 07 :
- Pression de service (statique): 26 bar
- Matière de l'élément refroidisseur: Aluminium
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
