|
|
* EUCARIGID-RAHT :
Pipes and fittings made of C.PVC for hot domestic water until 95°C
with BENOR quality label (following NBN EN 1566-1).
* EUCARIGID-RA :
Pipes and fittings made of PVC for cold domestic water (until 65°) following manufacturers standard or with BENOR quality label (NBN EN 1329). |
|
Features
8 different, continuously improved sealing systems
Large number of product varieties available
Customer specific designs, even for high-demanding uses
Combinations of various mediums and electrical currents
The most modern materials and manufacturing processes guarantee the highest quality
Products
In almost all branches of industry rotary unions are needed for transmitting mediums between stationary and rotating machinery parts, whereby every application has different requirements. We have developed an extensive selection of various sealing systems, in order to meet these different requirements, and to be able to offer an optimal solution. We have a large range of products available, and as well customer specific designs.
|
|
Barco 5200 Series Plane Swivel Joints
Handles single & multi-plane swivel movement with positive sealing. Available in 1" through 6" sizes.
Special design features:
- Two rows of widely spaced bearings support heavier loads.
- Three-piece design simplifies repair.
- Spring energized seals offer leaktight sealing at all pressures, including vacuum.
- Threaded styles are Nitrotec® treated for corrosion and wear resistance.
- Seal can be replaced without removing bearings.
- Available in three seal materials that are compatible with many gasses, fluids & chemicals. |
|
Style 162 Transition Couplings...
For joining pipe of different diameters
The Dresser Style 162 Transition Coupling permits you to connect two different kinds of pipe or sizes of pipe. You simply select the correct coupling for the pipe diameters being joined. The drawings at right illustrate how gaskets of different cross-sections adjust the coupling to your requirement. Further adjustment is accomplished with reducing middle-ring couplings. |
|
sf 274 und sf 277
Adjustable Male Stud
Standpipe
Operation
The nut on sf adjustable cone sealing couplings can be turned, due to the retaining pin which holds the nut in place. This pin sits in a groove between the nut and the coupling body. Sealing is by means of the O-Ring on the 24° cone and conforms to DIN 3865.
Advantages
positionable as the nut can be turned on the stud
can be assembled onto compression studs and onto studs to DIN 3853
minimal cross-section variation
easier and quicker assembly because of minimum movement exerting little torque
highly leakproof due to O-Ring seal
highly resistant to pressure surges and vibrations in the system
high strip-off safety degree due to form-fit construction |
|
The Innomatec connec ® Quick Connector System closes pipes, connecting pieces, tubes, drill holes, outer threads, inner threads and all types of cylindrical bodies, but it can also connect you to a desired circulation system. Oval, rough and cast surfaces along with high tolerances samples are radially sealed.
The innomatec connec ® Quick Connector System can be loaded with a sample manually or with an automatic tool. The Quick Connection is pneumatically activated with a pressurized air system. Sealing occurs with an elastic rubber washer. The system is filled or sealed through the tested connection. After the test is complete, the test connection is depressurized, the sealing ring relaxes, and the connection can be removed. Whether the connection must be armed with a sliding barrier depends on diameter, working pressure, and surface properties (oiled, etc.).
The innomatec connec ® Quick Connector System has an excellent degree of sealing (and is “helium-proof”). The standard lives of the sealing rubber washers are appropriated depending on routine aptitude. The change in the sealing rubber washers can be very easy and does not necessitate the use of tools.
There are a number of special inplementations for specific uses with motion limitation, sliding barriers, support hulls for specific environmental conditions. For specific utilizations, the connection measurements and individual parts can be adjusted to the task. We welcome any of your questions. Please use our checklist for this purpose. |
|
| These couplings are designed for all important low pressure applications as well as for pressures ranging up to 650 bar (on demand even more). They vary from applications in machining, hydraulic, off-shore, security technics, fire protection, mould construction, plant engineering, laboratory, Chemical industry, pharmaceutical industry, food industry, laboratory technics, medical engineering to clean room applications. All couplings according DIN ISO 7241.B are interchangeable amongst each other. |
|
Interchangeable Unions to DIN 2993
sf 141
Union, inside-outside
thread
sf 140
Union, both sides
inside thread
sf 140 WF
Elbow Union
sf 140 TF
Tee Union
sf 141
Union, inside-outside
thread
sf 141 WF
Elbow Union
sf 141 TF
Tee Union |
|
Flanges
American standard ASME/ANSI
- Welding neck 150 lbs.
- Welding neck 300lbs
- Welding neck 600 lbs
- Slip-on 150 lbs
- Slip-on 300 lbs
- Blind Flanges150 lbs
- Blind Flanges300lbs.
ASME/ANSI European standard DIN
- Welding Neck DIN 2632 PN 10
- Welding Neck DIN 2633 PN16
- Welding Neck DIN 2635 PN40
- Plane flanges DIN 2576 PN10
- Blind FlangesDIN 2527 PN 10
- Blind FlangesDIN 2527 PN 16
- Blind FlangesDIN 2527 PN 40
Europeanstandard (cont..) DIN
- Threaded Flanges
- DIN 2566 PN 16
- Loose Flanges Aluminum
- Loose Flanges, hot galvanised
- Loose Flanges, stainless
- Pressede Loose Flanges, stainless
- Pressede Loose Flanges, zinc plated
- Sandvik Coupling L |
|
STENFLEX swivel joints are used in applications involving liquid and gaseous media. The swivel joints can be used as flexible pipe connectors under the most demanding conditions and can withstand extreme temperature and pressure.
STENFLEX swivel joints are highly suitable for absorbing oscillations. Swivel motion can be handled as well as complete rotation at low speed.
|
|
STENFLEX pipe connectors are designed to disrupt unwanted sound transmission and absorb vibrations in piping systems, pumps, control fixtures, machines and equipment.
The most widely used application for rubber-metal connectors is found in building technology. Noise caused by machinery, pumps or burners in public and private buildings, e.g. in homes, hospitals and schools, is considered a nuisance.
|
|
| Connections, Flexible devices, Valves, Clamps for: Watering, Compressed air, Welding, Irrigation, Fire, Hydraulics |
|
Features:
- Compact and easy to install
- 100% self cleaning
- Fits all flange and pipe connections
- Available in cast iron, stainless and aluminum
- Reduces noise level
- Minimized pressure drop
Applications:
- For all high and low density dilute phase systems
- For plastic pellets, other granules and abrasive products
- For retrofitting existing systems
- For replacement of long and short radius elbows - and other pipe bends |
|
HTC tube fittings are convenient [building block] components. The offer great flexibility in the design and construction of high and ultra-high vacuum system.
-- Flanges : 304 S.S. ( Other material available upon request )
-- Fittings : 304 S.S. ( Other material available upon request )
-- Flexible hoses : 304 S.S.
-- Flexible bellows connections : 316Ti, 321 S.S., 316K S.S., 613 S.S., 304 S.S.
-- HTC tube fitting are made from welded pipe or tube.
-- Larger or special size available upon request
-- Seamless pipe or tube are available upon request. |
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
|
|
