|
|
Setrab Oilcoolers
Setrab´s cooler program is designed for flexibility and performance. This means that our product range achieves superior applicability for our customers, and we can devise the best possible solution to suit the conditions dictated by the customer´s application. We can therefore offer our customers the right product for every occasion. Quality has top priority for Setrab. For us it is natural that quality is the guiding star when it comes to service and design, as well as production and distribution, to achieve the result the customer expects. We are working towards the highest quality on all levels within the organisation and the continuous development of our quality assurance system is a process that engages all of our employees.
Setrab's STD, SLM and CP air cooled oil chillers |
|
AIR-OIL HEAT EXCHANGERS -SERIES AP WITH HYDRAULIC MOTOR MANUFACTURERS :
This type of exchanger has been designed for use on movable machines where battery feed is insufficient or when exchangers with direct current supply are inadequate to produce high thermic yields. The radiative unit is of aluminium because this material is a very good conductor; providing high thermic yields and relatively compact over-all dimensions. Thanks to the particular construction of the radiative unit the exchangers of the series APL cope well with water industrial hammer conditions which, at peak values, must not exceed the minimum allowable dynamic pressure of 20 bar. The maximum allowable static pressure is of 35 bar. |
|
Long and secure functioning Setrab STD Oil chillers are used in applications with low to medium-pressure systems or in circulation systems where the oil cooler is an important component for achieving long and secure functioning. For example, in hydraulic systems, engines, transmissions, transformers, fuel industrial coolers, etc.
Technical specifications
- Maximum working pressure is 10 bar. Approved testing at a dynamic working pressure of 0-10 bar, 200,000 pulsation in load, 2 Hz.
- Corrosion protection: Nocolok brazing process and epoxy-coating.
- Connections: BSP |
|
"Off-Line Air / Industrial oil cooler Series BNK
Maintenance friendly design
Compact dimensions
Low noise emissions
Broad performance range
Rugged cooling matrix
Comprehensive accessories" |
|
"Oil / Air aftercooler Series BLK
Maintenance friendly design
Compact dimensions
Low noise emissions
Broad performance range
Rugged cooling matrix
Comprehensive accessories" |
|
"Oil / Industrial water cooler Series BWT
High exchange efficiency
Equally distributed turbulent flow
Little installation space required
High fatigue life
Low water consumption
Maintenance free
Broad temperature range
Easy installation" |
|
AIR-OIL MANUFACTURERS OF HEAT EXCHANGERS WITH ALTERNATING CURRENT ELECTRIC PROFESSIONAL FANS - SERIE AP:
Today the use of air in hydraulic equipment is more and more common.
The benefits are: No water supply required Totally independent of plummed systems Reduced running costs in comparison with
the water-oil exchangers, even if initial investment is higher
Residual warm air can be used for heating
With air-oil heat exchangers the professional radiator unit is of
aluminium for minimum conduction. |
|
SELF-CONTAINED COOLING MACHINES:
The RAS cooling units were engineered and manufactured to substitute the former GAR and OCS series with an uncomplicated and compact product. The units are made up of an aluminium air-oil exchanger and a single electricity motor which operates both the oil circulation industrial gear pump and the cooling professional fan. |
|
Air/Oil standard heat exchangers suppliers
The range of air/oil heat exchangers has proved to be extremely reliable for a number of different hydraulic oil cooling requirements using the air generated by electric industrial fans, hydraulic fans or, in the industrial sector, by single-phase and three-phase electric fans. The availability of models has now been further extended in order to satisfy all requirements.
|
|
New LAC2 air/industrial oil coolers with Alternating current motor
Up to 20 % higher cooling capacity 160 Kw. The LAC2 cooler is suitable for installation in most applications and environments.
Economic and environmental benefits
- The hydraulic system’s and oil’s useful life is extended
- The hydraulic system’s availability increases, more operating time and fewer shutdowns
- Service and repair costs are reduced
- High efficiency level maintained in continuous operation. |
|
| Lytron's ES Series aluminum suppliers of oil coolers are engineered for high performance with poor heat transfer fluids such as oils and EGW. The extended surface flat tube design provides 2.5 times better performatnce than competitive units. The unique flat tube and header designs result in lower pressure drop so smaller, less expensive pumps can be used. Welded headers are pressure tested to 150 psi (10.3) bars and the fluxless, vacuum-brazed core provides strength and reliability. The Aluminum Oil Industrial coolers are available with or without a professional fan plate, and with finish options of aluminum or black paint. |
|
DIRECT CURRENT AIR-OIL HEAT EXCHANGERS MANUFACTURER:
This series of heat exchangers is particularly useful in cooling oleo-hydraulic plant on mobile machinery as it is fitted with direct current 12 or 24 V electric professional fans. The cooling element is in aluminium, a material of high thermal conductivity, which provides high thermal yield from relatively contained dimensions. The particular conformation of the radiant block is such that APL series heat exchangers are highly resistant to the stress produced by hammering which, however, at peak value, should not exceed the maximum dynamic pressure of 20 bar. The maximum permitted static pressure is 35 bar. |
|
WATER-OIL HEAT EXCHANGERS MANUFACTURER WITH TUBE BUNDLE:
They consist of small diameter smooth tubes; this allows the best compromise between high thermic yield and low pressure loss. For a good exchanger practices some oil rates are indicated in the tables. Going down to the lowest rate of flow, indicated in the tables, the low oil speed causes a great loss in yield, whereas a rate of flow which is superior to the maximum indicated, causes great pressure loss and does not considerably increase the thermal yield. The yield diagrams indicate the heat quantity each exchanger can disperse according to the difference between oil and water mean temperatures. |
|
| These compact manufacturers of heat exchangers make it possible to dissipate important powers. Technology with welded PWO, tubular plates Flovex or plates and joints. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
