|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
Advanced Diagnostics in a Portable, Expandable Package
Not all data collection systems are created equal. With thousands of users around the globe, ADRE PDS's are trusted by machinery professionals in a wide variety of industries for their most advanced diagnostics requirements. ADRE truly is the diagnostic product that customers across industries trust for their diagnostic and data collection needs.
Synonymous with quality and advanced technology, ADRE leads the way.
|
|
|
|
|
|
RogaDAQ 16 datalogger Description:
With the introduction of the RogaDAQ16 USB2.0 data acquisition system, a new age of measurement technology begins.
USB 2.0 / 480MBIT (USB1.1/12MBIT COMPATIBLE)
16 analog input channels (16bit/500kHz max.)
IEPE sensor supply (24V/4mA)
0.125V to 10V input range
Individual preamplifiers
4 analog output channels (16bit/100kHz)
Powerful DSP (255MIPS) for filtering, control etc.
24 digital I/Os
Optional 24bit counter, timer, PWM, incremental encoder
Free drivers for major application software
including DASYLab; LabView & DiaDem drivers & RogaRec Software; FlexPro7 Standard
The RogaDAQ16 is an affordable multichannel IEPE solution. The USB 2.0 interface permits unrivalled portability. Hotplugging the data acquisition unit during operation has now become a reality. The compact and rugged measurement unit with its BNC connectors breakout boxes obsolete. Downward compatibility to USB 1.1 also permits to run this high performance measuring system with older hardware. Simplicity of integration, whether mobile or stationary, has reached a new level.
|
|
|
2 channel USB sound card with IEPE sensor supply. It can be used for noise and vibration measurement.
|
|
VC-2100 - Vibration Comparator
Our line of vibration comparators can serve as your vibration "watchdog" in a wide range of situations in which vibration based judgments must be made, such as in go/nogo vibration testing of products, facilities diagnosis and machine tool cutting tool damage.
Features:
- Simultaneous two-band measurement.
- Digital display function.
- Analog output.
- Headphone output.
- Comparator gate.
- Comparator time delay setting.
- Compact 96 x 96 (DIN) size.
Specifications:
- Number of Input Channels: 1
- Input Range: 0.1 to 50000 m/s2
- Number of Settable Bands: 2
- Measurement Modes: Rms, Peak, Maximum hold, Peak hold
- Output Modes: Analog output, Headphone output, Cal signal output, RS-232C output, Over output
- Comparator Function: Judgements made independantly for each band
- Operation Temperature: 0 to 50º C
- Dimensions: 96 mm x 96 mm x 112 mm (DIN)
- Weight: Aproximately 500 g
|
|
|
|
|
|
SIR-3000 Series
Raid One Data Acquisition
The robust new SIR-3000 series recorders from Sony are a redundant, secure, customizable and networkable solution for today’s critical sound and vibration data acquisition requirements. The dependable new recorders limit the potential of having to repeat critical, difficult or expensive tests due to data acquisition failure.
The SIR-3000 Series features hot swappable, front mounted dual hard disk drives to protect valuable data in a RAID One array. The redundant high capacity 200GB drives insure high volume tests are accurately captured each and every time without the worry and expense of a drive or media failure.
Regardless of the sampling rate, the system accurately records data to the redundant hard disk drives at a 12Mbps recording rate. The test engineer can have direct access to specific data during post processing with the elimination of the need to wind and rewind the tape.
Sony has included data security features including a built-in Nickel metal-hydride battery back up for both main AC and DC power sources that provides an orderly shutdown to prevent data loss. The drive is also key lockable and can be quarantined for maximum-security.
Recording channels can be expanded up to 128 channels with additional units for data input. Two measuring unit options are also offered: the SIR-3032i with a sampling frequency of 48kHz(20kHz) or the SIR-3032W with a 192kHz(80kHz) sampling rate to further customize the system.
|
|
|
|
|
|
The XL2 is a handheld acoustical analyzer paired with a powerful Audio analyzer. The set of functions is ideal for testing, monitoring and logging of factory or machinery noise pollution.
The practical blend of electrical and acoustical functions, combined with computer connectivity through the standard USB interface, positions XL2 to be an indispensable tool for every engineer.
Acoustilyzer Features
Sound Level Meter
In addition to the familiar instantaneous and integrated sound pressure level (SPL) measurements, the repeatable LEQ and LCpeak measurements complete the event monitoring requirements.
The XL2 visualizes the actual audio spectrum (RTA) without interrupting ongoing sound level measurements. All measurement results may be logged to the internal memory for further investigations.
RTA, Real Time Analyzer
The enhanced real time spectrum analyzer (RTA) features high speed measurements with selectable 1/1 and 1/3 octave bandwidth. The RTA simultaneously provides real time single band SPL and LEQ measurements complying with the IEC 60804.
Stored spectra may be averaged or combined by using the available mathematical functions. The “Max-Min” display is particularly helpful for finding dominant room modes and characterization of listening areas.
Zoom FFT
Extremely fast, real-time Zoom FFT with resolutions up to 0.7Hz over the entire frequency range. The ideal tool for visualization of comb filters and narrow band effects. Features detailed cursor readout and data storage.
|
|
|
|
|
|
Data Logging Real Time Analyser
Description:
Model 30 Sound Level Meter & Real Time Analyser with 1:1 Octave Band Filters
The Model 30 (Class 1) and Model 30-2 (Class 2) are high performance, yet user friendly, integrating Sound Level Meters and Real Time Frequency Analysers.
Both models meet or exceed the latest standards for compliance with worldwide regulations and guidelines, making them ideal for most applications.
Taking measurements is as simple as pressing the 'record' and then 'stop' buttons. The wide single dynamic span of over 110dB ensures that you never make invalid measurements that 'Overload' or 'Under range'.
The Model 30 instruments simultaneously measures parameters with all Frequency and Time Weightings, this gives users the confidence to know they will always have the correct data for subsequent analysis.
Real Time Analysis allows users to measure all 10 individual 1:1 Octave Bands at the same time. This is very practical for reliable, accurate and rapid capture of variable noise levels to optimise the accurate prescription of hearing protection in industrial environments.
The Model 30 series can also be supplies as a Noise Measurement Kit containing all that is required to carry out a noise survey, including a Model 30 Sound Level Meter, Acoustic Calibrator, Windshield, Hard Attache Carrying Case, Wrist Strap, Carrying Pouch, Software, Calibration Certificates, Download Cable & Batteries.
|
|
|
Quest Technologies offers a complete line of datalogging sound level meters and real time analyzers. The SoundPro® SE/DL Series includes Advanced Hand Held Sound Level Meters and Real-Time Frequency Analyzers. When used with QuestSuite® Professional II applications software, you can simply and reliably perform your advanced noise analyses.
|
|
Choralis, orchestrate your measurement...
New regulations include requirements relative to airborne noise insulation, impact noise and noise generated by technical equipment from the design stage. The verification of building sound quality requires precision instruments perfectly suited to the requirements of field measurements.
01dB offers the “modular‿ technical solution that fully meets all issues relative to building noise measurements: sound level meter Blue Solo, combined with dBSolo-B wireless remote control, noise sources and dBBati software.
|
|
|
|
|
|
Colour Coded Sound with the CEL-620
Casella CEL has developed a colour-coded display system for sound level meters which simplifies use and reduces the risk of misinterpreting data. The new 620 series of pocket sized meters incorporate a high resolution colour display into the smallest and easiest to use sound level meter on the market.
The colour readout assists the user by displaying results in a simple colour coded format that is impossible to misinterpret. Ease of use has been a key design goal in the development of this instrument, so from simple point and shoot measurements to full industrial hygiene assessments, all measurements can be performed quickly and easily.
The CEL-620 uses digital technology that can measure in a range up to 140dB, dismissing the need for range adjustment and eliminating reading errors which may result. It measures all occupational noise parameters simultaneously; rather than changing the instrument setup you simply change which noise parameters you wish to view knowing that all parameters can be viewed afterwards even if not selected at the time. "The CEL-620 really presents the next generation of workplace sound level meters," said Tim Turney, Product Manager for Casella CEL. "A real-time octave band analyser has never been so compact and yet filled with technology designed to make life easier for the health and safety professional."
The CEL-620 is supplied as a kit in a rugged briefcase, which includes an acoustic calibrator, windshield, software and USB download cable. Instrument and calibrator come with calibration certificates as standard, documenting compliance with the latest IEC 61672 Sound Level Meter standard.
|
|
Battery powered Analog Audio Analyzer that fits into the palm of your hand.
It provides you with a comprehensive set of functions essential for the analysis of professional audio systems.
Minilyzer continuously measures the signal and displays the desired results with all complementary information on an illuminated hi-res graphical LC-Display.
The Minilyzer with software V2.00 (or higher) and the MiniSPL form a comprehensive integrating sound level meter.
Product-details
Measurement functions:
Level RMS, Relative
Sound Pressure Level
Distortion Analyzer (THD+N)
VU & PPM Meter
Speaker Polarity Test (for all speaker types)
Signal Balance Error
Frequency-/Time-Sweep Recording
1/3rd Octave Spectrum RMS & SPL
Scope
|
|
Programmable
Sound Level Datalogger
ModelFDSL 331
Auto Ranging Measurement 30dB to 130dB
Work with Window Software
32,000 Records Data Logger
Bar graph Indication with Back Light
USB cable available for optional purchase.
Specifications:
--------------------------------------------------------------------------------
DSL 331 FEATURES
Auto Ranging Measurement 30dB to 130dB
Work with Window Software
32,000 Records Data Logger
Bar graph Indication with Back Light
RS-232 Real Time Display Software for Window 95/98/2000
Frequency Weighting: A, C
4-Digit Display with updated cycle 0.5s
0.1dB resolution
Max/Min Hold Function
The standard Fast and Slow Time weightings
AC/DC signal output
Overload condition indication
Auxiliary output jack
IEC 651 Type II, ANSI S1.4 Type2.
Back screw hole tripod connection
External Power DC 9V input
Calibration Potentiometer easy to adjust
|
|
| ... products without technical information |
| |
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
InfoLink® is a wireless fleet management system that monitors and communicates a wide range of essential fleet truck usage and performance information. Each truck is in continuous communication with the management team offering information on location, performance, operator productivity, unauthorised use and maintenance requirements.
InfoLink can be run on existing 802.11 Wireless LAN systems, eliminating the need for an expensive new data transmission set-up. All data is transmitted in real time to ensure immediacy of information.
The use of InfoLink will result in better decisions on fleet management. Companies and organisations can uncover accurate facts and performance on shift-working patterns that were previously much harder to define. Detailed reports provide insights into equipment use based on actual processes and functions.
InfoLink is another example of Crown’s commitment to delivering superior value at the lowest cost of ownership.
|
|
|
|
|
|
Off-line fuel monitor СКРТ 31 Lite is designed for data logging and displaying vehicle operational data, fuel monitoring and vehicle route tracking (option). Collected data are stored in non-volatile memory of the off-line fuel monitor CKPT 31 Lite.
Off-line fuel monitor CKPT 31 Lite is mounted on the dashboard in the driver’s cab. The controlled parameters can be displayed and checked either on the screen of the off-line fuel monitor on-board the vehicle or using an external personal computer. Standard sensors (speed sensor, engine speed sensor, ignition key position sensor) and additional sensors (fuel flow sensor DPT, fuel level sensor DUT-E) can be connected to the off-line fuel monitor CKPT 31 Lite.
In order to perform subsequent automatic data processing and detailed data analysis in the office Software “CKPT-Manager” is used.
Controlled parameters of CKPT 31 Lite:
- Fuel consumption
- Fuel level in tank
- Fueling volume and time
- Fuel discharge volume and time
- Traveled distance
- Traveling time
- Idle time
- Vehicle speed
- Engine speed (RPM)
- Motor-hours of operation
- Engine operating time
- On-board power supply
- Vehicle travel route according to GPS data (option)
Advantages of CKPT 31 Lite:
- Continuous real-time recording of vehicle operational data
- Automatic wireless data transmission to the personal computer (option)
- Numerous service functions for driver and manager
- Moderate price and fast payback
- Detailed documentation
- User-friendly and informative software
- Generation of reports in the form of texts, charts and diagrams
- Certificate of conformity (CE)
|
|
|
|
|
|
ShockWatch StartManager®: Equipment Access and Usage Monitoring
for Improved Forklift Safety and Fleet Management
By preventing untrained personnel from using specified equipment, the StartManager improves forklift safety and reduces damage-related costs in your facility while monitoring usage. The device reliably monitors and records operator identity so that if damage does occur, supervisors can determine accountability and respond promptly with necessary repairs or corrective action options. Optional software provides equipment access reports, which also help supervisors decide when to train additional personnel on certain equipment to ensure OSHA regulatory compliance.
The StartManager's usage reports also provide the information needed to improve fleet management. By monitoring the number of labor hours for each piece of equipment, you can make smarter decisions about when to rotate your fleet. Optimal equipment utilization extends the equipment lifecycle while minimizing costly downtime, repairs, and replacements that result from overuse.
Features Designed for Maximum Performance:
Monitors and controls access to equipment operation
Reports data via an iButton
Includes user-friendly software with client server and Internet capabilities
Works in conjunction with your preferred access device, including HID proximity card readers, iButton readers, or infrared readers
UL rating (pending) - Type E, EE, GS, LP, LPS, DE, and DS
CE-certified (pending)
|
|
|
|
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The ShockLog records the date and time of up to 400 events. It has several unique features, making it especially suitable for applications in which the cost of exposure to out-of-specification environmental influences is very high. The instrument is equally convenient for protecting high-value fixed or mobile installations, or characterizing shock and vibration during transportation.
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The Micro ShockLog — RD317 records the date and time of up to 128 events, in addition to peak values of impacts at user-specified intervals. Optional accessories include a humidity sensor.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
