|
|
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
SmartBalancer2 – Avoid unbalance in your business
Over 50% of all problems, faults and breakdowns of machinery are directly or indirectly attributable to unbalance of rotors. This causes premature wear of the bearings, fatigue fractures and catastrophic failure or to shaft deformation. This puts your operating personnel at risk, and can result in unexpected breakdowns of machinery and systems.
Profit from the complete field balancing package
The SmartBalancer2 is a practical aid, which thanks to its comprehensive diagnosis tools, quickly gives you an overview of the state of balance of your machinery and systems. This handy, battery operated device enables rotors to be balanced quickly, cost effectively and accurately in the installed condition – in one and two planes, i.e. statically and dynamically.
|
|
|
The Adash 4201 instrument is a portable, fully digital balancing and vibration analyser with the possibility of on-line measurements and data storing. It is intended for identification of bearing condition, lubrication and mechanical defects of the whole machine. It enables to apply diagnostics at the level of measurement overall values, FFT analyses and time signal measurement. Its equipment enables not only detection of occurring defects but also their detailed analysis and precise specification. It can also be used for single and two plane machine balancing and for run-up and run-out measurements. The analyser is characteristic by its very easy operation. If used with the DDS 2007 database and expert system, it is suitable for both experienced users and beginners. Also is possible to use simple A4000Download software. If used with the MDS 5.00 user software, it enables to evaluation the machine deflection shapes.
|
|
Vibrometers / Balancing Instruments
MinIbalancer MI 2100
The MinIbalancer MI 2100 by Hofmann is the state-of-the-art field balancing instrument for balancing rotating machinery in one or two planes under operating conditions.
Features:
Designed for field balancing in one or two planes
Best balancing results thanks to simple, clearly structured operation
Additional measurement of overall vibrations in order to detect unbalance problems
Measurement of the condition value of rolling bearings (option)
Balancing protocol directly to external printer (option)
Handy instrument body with fold-out stand
Application:
Field balancing on site
Balancing in production and assembly under field conditions
Measuring vibrations on bearings and machine housings
Determine overall or unbalance vibrations
Monitoring rolling bearing condition
Measuring rotational speed
|
|
Grinding Wheel Balancing Device
Easybalancer EB 3100
EB 3100 is a device for balancing grinding wheels under operating conditions in the grinding machine. The unbalance correction can be performed using two or three sliding weights.
Features:
Specially adapted to the balancing of grinding wheels
Simple operation for best balancing results and quiet running
Applications:
Field balancing of grinding wheels
Measurement of spindle vibrations
Measurement of spindle speed
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
| ... products without technical information |
| |
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
SmartBalancer2 – Avoid unbalance in your business
Over 50% of all problems, faults and breakdowns of machinery are directly or indirectly attributable to unbalance of rotors. This causes premature wear of the bearings, fatigue fractures and catastrophic failure or to shaft deformation. This puts your operating personnel at risk, and can result in unexpected breakdowns of machinery and systems.
Profit from the complete field balancing package
The SmartBalancer2 is a practical aid, which thanks to its comprehensive diagnosis tools, quickly gives you an overview of the state of balance of your machinery and systems. This handy, battery operated device enables rotors to be balanced quickly, cost effectively and accurately in the installed condition – in one and two planes, i.e. statically and dynamically.
|
|
|
The Adash 4201 instrument is a portable, fully digital balancing and vibration analyser with the possibility of on-line measurements and data storing. It is intended for identification of bearing condition, lubrication and mechanical defects of the whole machine. It enables to apply diagnostics at the level of measurement overall values, FFT analyses and time signal measurement. Its equipment enables not only detection of occurring defects but also their detailed analysis and precise specification. It can also be used for single and two plane machine balancing and for run-up and run-out measurements. The analyser is characteristic by its very easy operation. If used with the DDS 2007 database and expert system, it is suitable for both experienced users and beginners. Also is possible to use simple A4000Download software. If used with the MDS 5.00 user software, it enables to evaluation the machine deflection shapes.
|
|
Vibrometers / Balancing Instruments
MinIbalancer MI 2100
The MinIbalancer MI 2100 by Hofmann is the state-of-the-art field balancing instrument for balancing rotating machinery in one or two planes under operating conditions.
Features:
Designed for field balancing in one or two planes
Best balancing results thanks to simple, clearly structured operation
Additional measurement of overall vibrations in order to detect unbalance problems
Measurement of the condition value of rolling bearings (option)
Balancing protocol directly to external printer (option)
Handy instrument body with fold-out stand
Application:
Field balancing on site
Balancing in production and assembly under field conditions
Measuring vibrations on bearings and machine housings
Determine overall or unbalance vibrations
Monitoring rolling bearing condition
Measuring rotational speed
|
|
Grinding Wheel Balancing Device
Easybalancer EB 3100
EB 3100 is a device for balancing grinding wheels under operating conditions in the grinding machine. The unbalance correction can be performed using two or three sliding weights.
Features:
Specially adapted to the balancing of grinding wheels
Simple operation for best balancing results and quiet running
Applications:
Field balancing of grinding wheels
Measurement of spindle vibrations
Measurement of spindle speed
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
| ... products without technical information |
| |
SILO is a vertical filing system with high intensity storage Thanks to a system of shifting trays, SILO offers increased exploitation of vertical space taking up limited surface areas. The operating SW on every machine allows the handling and control of filed materials with the greatest order and information, and all with operator safety and convenience of use in mind. Reliability, sturdiness and extreme dimensional modularity make SILO the best solution for problems associated with filing in very high locations.
Advantages
- Maximum exploitation of vertical space
- Future height and bay position adjustability
- Single/multiple bays, and on different levels
- Modular trays in heights, divisible and equipable
- Protection against dust and unauthorised entry
- PC and operating SW on every machine
|
|
|
|
|
|
The Shuttle® XPmultiple consists of two independent modular high-bay systems arranged in tandem. Trays are transported from the rear system to the front system – and vice versa – by transfer unit. Items are then removed by the operator from the access window. Speed of delivery from request to actual delivery is extremely fast. Internal pre-order picking reduces the waiting time even further. The system can be controlled by Kardex PowerPick® software which allows items to be managed and controlled in preparation for storage and retrieval.
The Shuttle® XPmultiple is ideal where it is impossible to install two separate systems. Deep, awkward, narrow spaces can be used to their full capacity and routes reduced by having only one access opening. The space required for movement is cut by 50% when compared to individual systems and whilst an order is being picked at the access window, the system is preparing the next tray for delivery in the background.
The modular structure of the Shuttle® XPmultiple ensures almost infinite versatility whilst exploiting different room heights. Every Shuttle® XPmultiple can be used as a stand-alone unit and depending upon requirements can be expanded to form a composite system and extended where and when necessary
|
|
The Kardex Shuttle® XPCrane offers all the same benefits as a miniload system but with 100% more flexibility, greater scope for future expansion and superior cubic utilisation of space.
Principle
The Kardex Shuttle XPcrane Vertical Lift Module (VLM) is an enclosed system of vertically arranged trays, an extraction platform and a series of computerized controls that allow operators to stay in one location while up to millions of items can be delivered automatically (Patent Pending).
This system is comprised of a series of vertical modules with one central crane delivering items to an ergonomically positioned workstation.
KARDEX Shuttle XPcrane VLM can consist of up to 12 single modules and have a storage capacity of 5.200 m² with footprint of only 74 m²
|
|
The Shuttle XP is a high density and dynamic vertical lift system. The Shuttle XP builds upon the tremendous success of the previous NT model. It is built to maximise on your ceiling height with units available up to 30 meters high. One unit can carry a gross load of 60 tonnes or more.
Combined with the Kardex software Powerpick 5000 you will be able to maximize the efficient use of your inventory giving details of availability, transactional history, and space utilisation to boost your productivity increase even further.
Benefits:
Increased Picking Speed
Saving Space (80% will be typical)
Saving Time
Health and Safety
Better Protection (include PIN access control)
Software & Controls
|
|
Vertical Lift Module (VLM)
The Stanley® Vidmar® Vertical Lift Module (VLM) Automated Storage and Retrieval System (AS/RS) is the ultimate high-density storage solution. Manage up to 132,000 lbs. of materials from one convenient computer console!
An entirely modular structure, the Stanley® Vidmar® Vertical Lift Module allows you to store, locate, and pick materials for limitless types of applications. A variety of VLM models offer your choice of performance, capacity, and configuration options; whatever you need to achieve, the Vertical Lift Module is your answer!
|
|
System of vertical store automatic, composed of a bearing structure on which the entry and the export of the goods are automated thanks to a shuttle or mechanism extractor and elevator.
Produced principle the "with man" is applied to this machine, which allows:
To optimize the courses
To reduce times
Operation is very simple; the operator selects on the screen produces it wished and, automatically, the shuttle moves vertically up to the level at which it is located, the plate extracts corresponding and carries it to the station of picking or counts of exit.
Advantages
Data-processing management of the store.
Saving in space: all the height of the room is used.
Time-savings: the operator does not need to move of his work station to prepare an order.
Safety of the goods.
|
|
|
|
|
|
The Shuttle® XPlus is a vertical lift system which builds upon the success of the Shuttle® XP technology; its intelligent design allows organisations to utilise awkward spaces for their storage, providing them with greater storage capacity.
The system technology allows up to four Shuttle® XP systems to be combined with a single extractor which can move vertically, horizontally and diagonally, minimising waiting times even further. The design of the Shuttle® XPlus makes it an ideal addition to the Shuttle® XP system, leading to the creation of an intelligent and quick retrieval system.
Kardex Shuttle® XPlus – Technical Features
Up to four Kardex Shuttle® XP units combined in one system.
Total width: dependent upon the number of units combined.
Height: from 3,050 to 20,050 mm.
Maximum payload: 60 tonnes per segment.
Tray spacing: 25 mm.
Vertical speed of extractor : up to 1.70 metres per second.
Horizontal extractor velocity: up to 1.00 metre per second.
Tooth belt safety margin: minimum 10 times.
|
|
The TOWER Storage Lift is Storage Racking with a robot-driven carriage.
Between two storage volumes in tray-carrying racking
A carriage travels, extracting the trays
Bringing them to a workstation,
By the order of the operator, relayed by computer.
Automated storage of this sort carries many advantages :
- Exploitation of high space often otherwise unused
- Accommodation to heavy or light items
- Adapts to bulky or minor items
- Trays can be removed from the storage space
- Storage machines can easily be adapted to new volumes
- Storage space is available where it is needed - at the point of usage
The TOWER Storage Lift fits into the universe of automated storage products from ELECTROCLASS between
- The Titan vertical carousel, plus best suited to smaller items and lower available heights
- And the Silo mini-load crane system, best suited to massive centralised storage of parts.
The TOWER Storage Lift the Four-wheel drive of Storage Automation
- Robust,
- Reliable
- Adaptable
|
|
| ... products without technical information |
| |
 see the results for the following category : Winches |
|
|
