Actuators

Stroke : 50 mm
Pressure: 2 bar - 8 bar
Force: 754 N

Cleanline Profile barrel with integrated switches Glandless spool valve for extended life and high performance Adjustable flow regulator for speed control Incorporates Norgren M/50 switches Single air and electrical connection for ...

Stroke : 50 mm - 2,500 mm
Rod diameter: 15 mm - 100 mm
Force: 7 kN - 450 kN

... customers’ requirements. Compatible with a wide range of motors. Shock resistance, longer lifespan compared with ball screw actuator. Easy operation in any environment. ...

Stroke : 40 mm - 2,000 mm
Force: 400 N - 200,000 N
Speed: 4 mm/s - 134 mm/s

... to be able to work in bad industrial environment. Acme Screw Linear Actuator LAP Series (duty cycle 30%) and ball screw Linear Actuator LBP series (100% duty cycle ) Linear actuator ...

Stroke : 910 mm
Force: 4,000 N - 7,000 N
Speed: 1.2 m/s - 1.4 m/s

Solar Tracker Actuator Load capacity 4000kg,suitable for large solar photovoltaic bracket and drive device. SPECIFICATION Voltage: 24V Maximum dynamic load: 40,000N Maximum static load: 70,000N No-load speed: ...

Force: 5 N - 80 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Rod diameter: 5 mm
Force: 30 N - 340 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Rod diameter: 6 mm
Force: 50 N - 620 N

... • Captive linear actuator with built-in guider for linear movements. Moving part do not rotate. • Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. ...

Stroke : 14 mm - 271 mm
Force: 6 N - 92 N
Speed: 5.6 m/s

THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » Freedom ...

Stroke : 27 mm - 309 mm
Force: 51 N - 780 N
Speed: 5.9 m/s

The ServoTube Actuator is an optimal solution for industrial position control. Faster than a ballscrew with the clean reliability of a linear forcer. ServoTube is a cost-effective alternative to air cylinders in applications ...

Stroke : 33 mm - 318 mm
Force: 137 N - 1,860 N
Speed: 5.3 m/s

THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » Freedom ...

Force: 20 N
Speed: 0.3 mm/s - 100 mm/s

The size 6 [14mm] hybrid linear actuator occupies a mounting footprint of 14mm square but provides over 20N of continuous thrust force. Size 6 hybrid stepper linear actuator has two form factors available ...

Stroke : 20 mm - 150 mm

Based on DINGS' platform products, high precision of lead screw linear actuator and self-developed simple linear module, DLM 20mm series is compact and reliable structure of linear solution. DLM 20mm Series is good precision, ...

Stroke : 20 mm - 250 mm

Based on DINGS' platform products, high precision of lead screw linear actuator and self-developed simple linear module, DLM 28mm series is compact and reliable structure of linear solution. DLM 28mm Series is good precision, ...

Stroke : 50 mm - 500 mm
Force: 0.5 kgf - 3 kgf
Speed: 80 mm/s

Technical Feature FSK30J Series are all-in- one and double rail ball screw linear guides. With low frequency, low noise and no lubrication, it is the best choice for customers who require compact, light and micro modules. Range ...

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

Dust Water Proof Enclosed Ball Screw Linear Module Short Description: Technical Feature FSL80 linear guide, fully sealed structure, body width 80mm, it is designed for dustproof usage in hard environment, avoid dust or miscellaneous ...

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

Dust Water Proof Enclosed Ball Screw Linear Module Short Description: Technical Feature FSL80 linear guide, fully sealed structure, body width 80mm, it is designed for dustproof usage in hard environment, avoid dust or miscellaneous ...

Force: 100, 200 N

Description High performance brushless motor RS232 service interface for easy setup Real absolute multiturn encoder Technical details Output/Interface Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCat, CANopen

RD12A rotary actuator with integral motor brake Job buttons Service interface Available with Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCa or CANopen interface

Compact positioning unit for secondary axes Integrated drive, position controller & encoder Closed loop position control Absolute multiturn encoder Boot loader via CAN RD53: Version with integral motor brake

Force: 3,400, 22,600, 14,400 N
Torque: 898.35, 428.4, 67.15 Nm
Speed: 3 m/s

Minimize the volume in your design with our lifgo® SVZ! • Helical Gearing • Super Silent • Tight Operating Parameters • High Quietness • Highest Precision • Simple Installation Application Example: lifgo® with helical gearing ...

Stroke : 35 mm - 3,754 mm
Force: 420 N - 1,000 N
Torque: 0.1 Nm

Spindle, toothed belt or direct drives with metal strip cover The linear actuators with metal strip cover are an extension of the standard programme. The metal strip offers protection against incoming dirt or particles ...

Stroke : 297 mm - 537 mm

rotaryARM The swivel arm module rotaryARM in connection with linear units is a very fast pick-&-place system for all tasks that require quick and precise automation solutions. It has a range of 297, 399 or 537 mm.

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 156 mm/s

The LD1000C linear actuator is ideal for the digitalization and control of vehicles, machines and building sections. It is extraordinarily robust and strong: The thrust force is up to 10,000 N and the stroke length reaches ...

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 130 mm/s

... desired color. The high quality and resistant linear actuator The LD1000E has a robust housing made of die-cast aluminium with a stable casing made of anodized aluminium profile and a lift pipe ...

... precision machined globoidal cam provides the rotary motion component and an encapsulated face cam provides the synchronized lift motion. The internal cam mechanism runs in a synthetic oil bath and is contained in ...

Force: 300 N - 1,390 N
Torque: 5.5, 2.5 Nm
Rod length: 500, 1,000, 300, 800 mm

The “light option” for simple manual adjustments Aluminium screw • Low-weight option thanks to aluminium screw and plastic slide bearin Screw cover •An elastic plastic sealing lip protects the screw Choice of guiding tube clear ...

Stroke : 0.2 mm - 300 mm
Force: 8 N - 5,500 N
Torque: 1.5 Nm - 170 Nm

Flexible all-rounder – with an unrivalled price-performance ratio Bearing cover •Dust/spray protection on Type 30-60 •Option of screw with slide bearing (resistant to fine dust/abrasions) Covers •Slot cover, as dust protection ...

Stroke : 0.2 mm - 300 mm
Force: 100 N - 14,000 N
Torque: 20 Nm - 1,100 Nm

The robust twin tube unit – compensates for high bending moments during hand and motor-driven adjustments Screw with choice of slide bearing or ball bearing •Ideal for use in environments with fine dust/abraded particles due to ...

Stroke : 305 mm
Force: 67 N
Torque: 1.7 Nm

NEW! Performance in an Ultra-Compact 2-axis Design. Designed for easy integration in OEM assemblies, the Haydon Kerk Z-Theta offers linear + rotary point to point motion in an compact footprint. Unlike in-house component-up designs requiring ...

Stroke : 9 mm - 200 mm
Force: 2 N - 45 N

The Size 8 by Haydon Kerk Motion Solutions is a 21mm stepper motor linear actuator. Size 8, 21000 series linear actuators are available in three designs - captive, non-captive and external linear versions. ...

Stroke : 12.7 mm - 250 mm
Force: 15 N - 90 N

The Size 11 by Haydon Kerk Motion Solutions is a 28mm stepper motor linear actuator. Size 11, 28000 series linear actuators are available in three designs - captive, non-captive and external linear versions. ...

Stroke : 25, 35, 50 mm
Force: 140 N
Speed: 0.01, 0.01 m/s

... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable for overcoming ...

Stroke : 44, 29 mm
Force: 140 N
Speed: 0.01 m/s

This new and highly reliable one-of-a-kind piston is equipped with potentiometric linear feedback that allows its stroke to be controlled in both directions and in a variety of ways: – Proportional movement – Scheduled ...

Force: 300 N
Speed: 0.04, 0.07 m/s
Ambient temperature: -5 °C - 60 °C

... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable for overcoming ...

Torque: 37 Nm

Rotation 180° or 90° Special angles on request Fluid feed-through End position adjustability

Torque: 1 Nm - 74 Nm

Pneumatic swivel actuator Double external stop to optimize the cycle time Rotation 180° or 90° End position adjustability Shock absorbers Fluid feed-through

Torque: 4 Nm - 154 Nm

Hydraulic swivel actuator Rotation 180° or 90° Special angles on request Fluid feed-through End position adjustability

Stroke : 100 mm - 200 mm
Force: 300 N - 600 N

L4.202 Linear actuators RA 60 K L4.202 Linear actuators RA 60 K max. lifting force 300 to 600 N stroke from 100 to 200 mm version with limit switches or stroke measuring system max. pull force: ...

Stroke : 100 mm - 600 mm
Force: 1,000 N - 6,000 N
Speed: 0.01 m/s - 0.04 m/s

max. lifting force 1000 to 6000 N stroke from 100 to 600 mm version with limit switches or stroke measuring system

Stroke : 80 mm - 250 mm
Force: 4.5 kN - 12.5 kN
Speed: 0.03 m/s

L7.101 Linear actuators RH 1250 L7.101 Linear actuators RH 1250 max. lifting force 4.5 to 12.5 kN stroke from 840 to 250 mm manual-hydraulic version pump strokes per 100 mm 7 .. 22 descent speed: ...

Stroke : 12, 24 mm

Motorized Actuators (GCM-6101) are offered with varying travel by a stepping motor. They have compact structure and stable operation. They can provide precise positioning accuracy and be used with GCM-T series high-precision ...

Translation-rotation unit Adjustable speed Simple and accurate positioning Compact Simple installation Light

Stroke : 40 mm
Force: 295 N

... Ultrasonic cutting offers real benefits in the form of speed and minimal dust generation. Not only that, but the ultrasonic actuator used for cutting is a durable piece of equipment that requires no maintenance. Compressed ...

Stroke : 100 mm
Force: 2,000 N

The special actuator SPA20 is suitable for welding operations of thermoplastic parts from medium to large size als well as for punching textiles. Operable with RDG, SDG and ADG generators as well as with an AGM generator ...

Stroke : 8 mm
Force: 0 N - 242 N

The special converter SPC35 are suitable for special applications of various kinds. Suitable for automated welding operations with short cycles Ideally suitable as a replacement for composite horns Constant spring pressure Heavy ...

Stroke : 10, 20, 30, 40, 60 mm
Force: 30 N - 220 N

► Hardened stainless steel guide This guide is robust, reliable and durable: Exactly what you need for your application! ► Decide for yourself! Sensing via magnetic field sensors or inductive proximity switches: Unlike the benchmark, ...

Stroke : 60, 30, 40, 10, 20 mm
Force: 30 N - 220 N

► Mechanical forced control Guarantees process reliability for your application since only one workpiece can be separated and guided through at a time ► Decide for yourself! Sensing via magnetic field sensors or inductive proximity ...

Stroke : 10, 20 mm
Force: 8, 10 N
Torque: 1.5 Nm

► 250 cycles per minute If speed is the key, nothing beats this unit. This lets you increase your component output and lower your unit costs, ► Saving energy with pulse control You only have to supply current briefly when retracting ...