|
|
|
|
|
|
Master Bond Inc. is a leader in the design, formulation and manufacture of adhesives, sealants, coatings and potting compounds for the assembly of both disposable, reusable and implantable medical devices. Master Bond’s product line includes epoxies, urethanes, silicones, cyanoacylates, and specialty solvent based systems. These products can be cured at ambient and/or elevated temperatures or by exposure to UV light. Specific formulations fully meet the USP Class VI protocol. Master Bond’s technical staff welcomes the opportunity to provide assistance to medical device manufacturers in the solution of specific assembly problems.
Master Bond's compounds can simplify and enhance the performance of many critical medical devices. Formulations have been developed which offer high physical strength properties and outstanding chemical resistance even when applied on dissimilar or difficult-to-bond materials. Additionally, selected products retain their desirable performance upon exposure to various sterilization procedures including autoclaving, radiation, ethylene oxide and the recently developed cold sterilants. These compounds can be used in a wide variety of devices such as diagnostic instruments (endoscopes, etc.), surgical tools, catheters and implantables.
|
|
|
Master Bond Inc. formulates a wide range of one and two component adhesive systems for bonding metals. From aluminum to cast iron to stainless steel to titanium select Master Bond for your specific needs. They will speed productivity, reduce waste, save energy and enhance produce capabilities. Job proven for over 30 years, Master Bond products are employed in industries ranging from aerospace, optical and electronics to oil/chemical processing, medical and automotive.
|
|
Aramid and leather, textiles and membranes, or synthetic and aluminized materials: Collano special adhesives - elastic, tear-resistant, weatherproof - bond the most diverse materials. Moreover, they introduce a new quality to the end product resulting in greater reliability, greater comfort and greater appeal, whether in outdoor clothing, fire protection, filtration or roofing.
With Collano adhesive systems the target "Bonding instead of Sewing" will be realised.
Easy processing, high performance, and improved efficiency are among the key characteristics of Collano adhesives:
Thermoplastic adhesive films
Reactive adhesives (UV- or moisture-curing systems)
Unique: the thermoreactive, pre-applyable PUR Collano® HCM
Hot melts
Dispersions
|
|
|
|
|
|
BUTYL SEALANTS
Polylok’s joint sealant system is custom engineered to meet the most exacting standards of the pre-cast concrete industry. Polylok Butyl Joint Sealant remains flexible and forms a permanent bond to a wide variety of substrates including concrete, metals and plastics. Adhesion and cohesion at the time of installation are excellent, and actually improve after the joint has been formed and placed in service. This sealant is designed not to shrink, oxidize or harden and has excellent resistance to temperature extremes, acid and alkaline environments. Polylok’s Butyl Joint Sealant is designed to fully comply with current ASTM Standards and specifications as required by Federal, State and Local agencies for use by the precast concrete industry and contractors. Available in sizes: 1/2'' x 21'', 3/4'' x 21'', 1'' x 21'', 3/4'' x 14.5'', 1'' x 14.5''. Special Sizes Available Upon Request.
PRODUCT FEATURES:
- Available in strip or coil form
- Non-stick, non-tear plastic backing
- New crush-proof packaging
PRIMARY APPLICATIONS:
- Concrete Pipe
- Utility Vaults
- Septic Tanks
- Sanitary & Storm Sewer Manholes
- Box Culverts
- Burial Vaults
- Wet Wells
- Concrete Wall Panel Systems
|
|
|
|
|
|
For ease of application and outstanding performance, choose Master Bond one part, heat curable epoxy systems. They are designed to save time, improve efficiency, eliminate waste and enhance reliability. These systems are pre-catalyzed and require only moderate heat to cure. This avoids the need to mix two components which can result in air entrapment. To prevent such problems, two part epoxies often must be mixed in a vacuum environment. Additionally, two component systems often have multiple mix ratios i.e. 10 to 1 by weight, etc. and limited pot lives. This often leads to errors. One part, no mix systems alleviate inaccurate mixing and eliminate wastage from non-use of compounds in specified time periods. Furthermore, the speed of cure is rapid — often faster than two component systems.
Master Bond offers an extensive variety of one component epoxy systems. They are available in small to large quantities and are freshly prepared to ensure maximum shelf life. We use the most advanced polymers and our technology is cutting edge. Special formulations are cryogenically serviceable, castable over 1 inch thick, machinable, electrically conductive, thermally conductive and have superior tensile strength properties. Additionally, NASA low outgassing approved systems and compounds that meet USP Class VI requirements are also available.
|
|
|
|
|
|
Optical systems offered by Master Bond include both one and two component epoxy resin compounds and one component UV curable compositions. The epoxies are specially formulated to maximize resistance to water and other adverse environments. Features of the optical systems offered by Master Bond are excellent light transmission characteristics, superior non-yellowing properties along with a wide range of systems where the index of refraction ranges from a relatively low 1.43 up to 1.61. The ultraviolet compositions cure tack free in the presence of air. Formulations have been carefully processed to exclude potentially objectionable contaminants as chlorine and other halogens as well as sodium and related elements. They provide innovative solutions to the many processing problems of the optical industry and virtually eliminate quality control difficulties caused by corrosion and other environmentally induced conditions.
Applications range from bonding and potting fiber-optic cables, connectors and terminations, upgrading the vibration and shock resistance of electro-optic assemblies, cementing and coating optical parts, potting LED devices, optical replications, bonding ferrules and connectors, and coating or encapsulating a wide variety of electro-optic and laser components.
|
|
|
|
|
|
Master Bond photoinitiated adhesives are part of a fast growing family of one component UV curable adhesive systems for high performance coatings, adhesives, sealants, potting and encapsulation. These UV and EB radiation curing adhesives include polyurethanes, epoxies, polyesters and acrylics. UV adhesive grades vary in thicknesses, hardness, chemical resistance, strength, clarity, etc. When exposed to a suitable UV light source, UV curable compounds usually cure in a matter of seconds. The Master Bond UV cure products are not oxygen inhibited and cure at ambient temperatures. Environmentally friendly, they are 100% reactive liquids which do not contain any solvents or other volatiles. Upon cure they exhibit minimal shrinkage. Additionally, they are strong, durable, and offer superior temperature and chemical resistance. If required, special formulations can be developed to best meet specific product application and performance needs. One new "dual cure" adhesive compound can be cured by exposure to either UV light or heat.
Master Bond UV curable coatings and adhesives are one component systems and require no mixing. They have a long shelf life when stored at ambient temperatures in the absence of UV light. They have excellent bond strength to metals, ceramics, many plastics and most rubbers. UV curing sealants adhesives and encapsulants are particularly suitable for automated continuous manufacturing processes because of their fast cure speeds.
|
|
|
|
|
|
Master Bond is a leading manufacturer of high performance adhesives and sealants for the aerospace industry. Our line of one and two component systems consists of epoxies, polysulfides, polyurethanes, silicones, acrylics, polyamides, anaerobics, cyanoacrylates and latex systems. Systems cure at room temperature, exposure to heat and upon exposure to UV light.
Our polysulfides are versatile synthetic elastomers which offer a unique set of application and performance properties for use as aircraft fuel tank sealants. They feature superior physical strength properties, chemical resistance especially to fuels, lubricants, water, etc. Master Bond’s product line also includes polysulfide/epoxy alloys which combine the adhesive strength properties of epoxy resins with the inherent flexibility of polysulfides to produce a truly unique family of tough, chemically resistant, high strength materials with a wide range of carefully controlled performance characteristics.
With over 3,000 formulations, our products offer you the flexibility to choose the system ideally suited to your project requirements. Including compounds for bonding and sealing transducers, fuel assemblies, metal & fibre reinforced composites, electronic assemblies, radomes & antennas, optical fibers and sensors.
|
|
|
|
|
|
Master Bond offers the widest selection of structural adhesives — over 3000 grades to meet your needs. Job proven for more than 30 years by major worldwide manufacturing companies, Master Bond products are presently employed in industries ranging from aerospace, optical and electronics to oil/chemical processing, medical and automotive. In fact, special grades are UL, USP Class VI and NASA approved. Often Master Bond adhesives are the most crucial part of the assembly process.
Our line of structural adhesive formulations consists of epoxies, polyurethanes, silicones, acrylics, cyanoacrylates and UV cures. They are designed to speed productivity, reduce waste, save energy and enhance product capabilities. They are available in small to large quantities and are freshly prepared to ensure maximum shelf life. We even have replacements for competitors discontinued products. If you have any unusual specifications, Master Bond will custom design an adhesive system to meet your requirements. When making your adhesive selection, you can depend on Master Bond.
|
|
|
|
|
|
Master Bond offers a broad line of thermally conductive epoxies, silicones and rubber based compounds widely used for bonding, potting and encapsulating. Featuring excellent thermal conductivity along with good physical strength and/or ease manufacturability, these compounds are available in hundreds of grades to meet your specific requirement. These vary from high strength, general purpose adhesives, sealants and coatings systems to highly specific “tweaked” applications. Uses include heat sinks, thermistors, chip bonding and underfill applications.
Controlled characteristics include toughened system with high peel and shear strength, resistance to vibration and mechanical shock, enhanced chemical resistance and good thermal cycling properties. They are also available for use in high temperature, deep vacuum, thermal cycling and other challenging applications.
Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our professional staff. They have years of experience, and will assess your problem and work with you throughout the design, prototype and manufacturing process. Master Bond products are manufactured under strict quality control standards at its plant in Hackensack, New Jersey, U.S.A.
|
|
|
|
|
|
Master Bond offers transparent epoxy formulations for use with elements in the optical path. They are formulated to maximize strength, applicability and environmental resistance in bonding, coating, potting and casting of optical systems. Attainable properties besides transmissions in excess of 97% include; specific wavelength characteristics, superior non-yellowing, low linear shrinkage, low exotherm, high electrical insulation, matched coefficients of thermal expansion (CTE, COE), along with a wide index of refraction range, from a relatively low 1.43 up to 1.61 IR. It should be noted that the ultraviolet compositions cure tack free. Master Bond products have been carefully processed to exclude potentially objectionable contaminants and provide innovative solutions to many processing problems. They virtually eliminate quality control difficulties caused by outgassing, corrosion and other environmentally induced conditions.
Master Bond optical polymers produce high strength bonds resistant to chemicals including water, oil, acids, and many organic solvents and are serviceable over a wide temperature range. They bond well to most substrates including metals, glass, ceramics, and many plastics, especially polycarbonates and acrylics.
|
|
|
|
|
|
Master Bond's two component adhesives offer unique versatility in application and performance. Their most desirable properties include high bond strength to a wide variety of different substrates, outstanding gap filling capabilities, excellent electrical insulation, high chemical inertness and outstanding resistance to shock and vibration. Special formulations are available including systems with thermal conductivity (electrically insulating) for heat dissipation, electrically conductive systems, systems for cryogenic applications, as well as systems with high performance in the most hostile environmental conditions. Viscosities and cure times can be tailored to meet specific application requirements.
Master Bond invites you to take advantage of our “one on one" support policy offering prompt technical assistance from our professional staff. They will assess your problem and work with you throughout the design, prototype and manufacturing process. Master Bond products are manufactured under strict quality control standards.
|
|
|
DYMAX light-curable adhesives cure in seconds upon exposure to longwave ultraviolet light and/or visible light. Light-curable adhesives optimize the speed of automated assembly, enable 100% in-line inspection, and increase product throughput. Industrial adhesives are available for plastic sealing, metal bonding, and glass assembly, as well as for joining dissimilar substrates.
|
|
|
|
|
|
The Master Bond UV adhesive line of rapid cure, one component ultra violet curing adhesive systems includes high performance UV curing adhesives, coatings, sealants, potting compounds and encapsulation compounds. The performance of each application-specific light cure adhesive is optimized for high bond strength, to be durable and offer superior temperature, abrasion and chemical resistance. Master Bond UV adhesives include polyurethane, UV epoxy, polyester, acrylic and silicone. UV curable adhesives and epoxy offer seconds cure when exposed to a suitable UV light source. Upon UV light cure they exhibit minimal shrinkage. Additionally, the line includes EB and UV curable coatings with an extra-hard, super-abrasion resist for a radiation curable coating.
Master Bond invites you to take advantage of our "one on one" support policy offering prompt technical assistance from our experienced, professional staff. We will assess your problem and work with you throughout the design, prototype and manufacturing process. Master Bond products are manufactured under strict quality control standards.
|
|
Advantages of Vitralit® UV and light curing-adhesives:
Easy handling
Short curing time for higher productivity
Solvent-free, no heat exposure
Long storage at + 5° c
Very good electrical properties
|
|
The Three Bond 3000 Series ultraviolet (UV) curing adhesives have been developed in our own laboratories to offer the finest combination of speed, strength and simplicity. They cure in seconds at room temperature and provide excellent bonding, sealing, coating and potting properties.
Three Bond UV adhesives are single component, solvent less resins which set when irradiated with ultraviolet light of wavelength 300 ~ 400nm. They can be perfectly matched to specific applications and in many cases offer secondary curing mechanisms such as anaerobic setting, thermosetting, moisture or primer setting to ensure complete curing even in shadowed areas.
|
|
Flexible
Adcote™: High performance laminating adhesives including urethanes, acrylics, polyesters, modified and formulated polymer systems.
Morstik™: Water and solvent based acrylic and solution rubber based pressure sensitive adhesives for label, tape and product assembly applications
|
|
Permabond line of structural acrylics was developed for demanding applications that require high tensile, shear and peel strength as well as maximum shock and impact resistance.
Permabond structural acrylics offer fast fixture and cure at room temperature providing a solution to the continuous demands for increased line speeds while decreasing the manufacturing costs that are associated with heat curing.
Permabond structural acrylics are suitable for bonding a wide variety of substrates offering great material selection. Materials such as metals, glass and composites are easily bonded with Permabond structural acrylics.
|
|
SikaSense® (e.g SikaColl®) and SikaTherm® are glues in dispersion made from different chemical bases (acrylic, polyuréthannes...) and presented in the form of emulsions (product aqueous phase).
Domain of application:
Industry automotive
industrial Carrosserie
Shipbuilding
Industry furniture
No flammable, these products further offer more security in the workshops, and allow companies to avoid expensive investments (installation of systems of extraction, or recovery of VOCs).
|
|
Rohm and Haas is the market leader in adhesives and coatings for the flexible packaging industry.
Rohm and Haas's goal is to offer customers in the flexible packaging industry the convenience and economy of a wide range of technologies, chemistries and expertise to respond to practically all bonding needs. Products include laminating adhesives, coatings, heat seals, cold seals, and extrudable resins. They are offered in water-based, solvent-based, and solvent-free forms to suit all sorts of application requirements - from the simplest to the more complex.
|
|
3M™ Aerosol Adhesive
Aerosol adhesives offer a wide range of performance and application characteristics. Most 3M aerosol adhesives also have a controlled spray pattern to help minimize overspray, clean up and unused adhesive. These adhesives contain no methylene chloride, chlorofluorocarbons (CFCs), or 1,1,1-trichlorethane (methyl chloroform).
|
|
|
3M™ Aerosol Adhesives are portable and ready to go at the touch of a finger. Select from a wide range of job-related formulations--various performance and application characteristics for production and maintenance jobs.
|
|
The anaerobio resins are one component resins, without solvents, which cure in the absence of oxygen and in the presence of metal, metal being the catalyst. Upon application, the adhesives fili ali the space and surface blemishes, They harden between two metallic surfaces to create a solid joint that resists fully to shocks, vibrations, high pressure, gases and chemicals of ali sorts.
These products are used for clamping screws, cylindrical fixation (bearing joints shafts,...), as well as fiat and threaded waterproof joints
|
|
|
|
|
|
Anaerobic Threadlockers
Permabond threadlocking anaerobic adhesives enable you to lock screws, nuts, bolts and studs to protect against loosening caused by vibration.
Benefits:
Prevents nuts rusting on to bolts
More cost-effective than using mechanical fastenings
Lubricates for easier assembly
Anaerobic Retaining Adhesives
Retaining adhesives are for the permanent bonding of co-axial joints. Benefits of using retaining adhesive include rapid, quick and easy assembly of parts.
Tolerances can be relaxed, reducing machining times and eliminating the need for interference fits.
Adhesive strength is usually higher than alternative methods of fixture.
Adhesives have a better fatigue life as they prevent metal fretting (which can be an issue with interference fits).
Anaerobic Gasketmakers
Permabond gasketing anaerobic adhesives are designed to replace traditional cork, wood, rubber, paper and silicone gaskets.
Benefits:
No relaxation or shrinkage so no need to re-tighten over time
One adhesive will replace many pre-cut gasket shapes
No need to handle fragile gasket
Less machining - surfaces need not be so smooth
Non-shimming - (100% metal to metal contact - so better stress
distribution).
Anaerobic Threadsealing for Pipes
Permabond pipesealing anaerobics are designed to replace traditional pipesealing materials such as hemp, PTFE tape etc.
Benefits:
No loose particles to clog valves
Easy to apply, allows accurate positioning of pipes and fittings
Lubricates for easier assembly
Suitable for water, gas, air and hydraulic systems
WRAS, DVGW, KIWA, Australian Gas Association and BAM approved products available
|
|
|
WEICONLOCK products are high quality anaerobic adhesives and sealants on the basis of special methacrylate resins, especially made for economical threadlocking, retaining and sealing of threaded, cylindrical and pipe assemblies.
|
|
High-temperature silicone rubber that bonds and seals up to 600°F, used for assembly or repair of high-temperature ducting, bonding ceramic tile in pulverizers, and making form-in-place gaskets
KEY FEATURES
* Cures at room temperature
* Acceptable for use in meat and poultry plants
* Qualifies under MIL-A-46106A, Galv. Repair
|
|
High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well suited for permanently locking studs. Locks against vibration loosening. Removable with heat and hand tools. Mil-Spec (S-46163A) Type I, Grade K.
KEY FEATURES
* Prevents vibration loosening
* High Strength Red
* Use on nut and bolt assemblies 3/8
* Heat required for removal
* Mil-Spec (S-46163A) Type I, Grade K.
|
|
10:1, flexible methacrylate adhesive offering fast fixturing and cure time to thermoplastics and composite materials. Fast setting formula allows for quick turn around for assembly parts. Excellent adhesion to galvanized metals when used with Metal Prep 90. Use with Mix Nozzle #14287
KEY FEATURES
* Designed for bonding thermoplastics, thermosets, metal, and composite assemblies
* Superior impact and fatigue resistance
* 10:1 formula
* Functional cure in 1 hour
* Bonds galvanized metal with Metal Prep 90
* Tensile elongation to 100%
|
|
Silicones are ready-to-use one component adhesives that polymerize at ambient humidity. After creation of a « skin » after 30 minutes, polymerisation continues from 24 to 48 hours for joint thickness going from 2 to 4 mm.
There are different chemical bases of silicon, acetic bases and neutral bases (methoxy, alkoxy...). They present good adhesion on ali supports and insure high performance in most applications (mechanical, electronic, electric...). Silicones have excellent resistance to Chemicals, and can be used in extreme conditions (high temperatures, UV).
MS Polymers are one component adhesives without solvents which harden from absorbing humidity. With a faster reaction than with silicones or PU, the reaction continues for 24 hours and until it is set. Non-toxic and without danger for the environment, MS Polymers are ideal substitutes for silicones and PU.
|
|
High strength contact adhesives for spraying, brushing or roller application. Choice of water-based or solvent-based formulations.
Solvent-Based Contact Adhesives
High strength contact adhesives for spraying, brushing or roller application. Choice of water-based or solvent-based formulations.
Water-Based Contact Adhesives
Some local and regional regulations have made solvent-based contact adhesives virtually obsolete. Using 3M water-based adhesives helps make compliance easier in more and more applications.
|
|
|
|
