|
|
|
|
|
|
* All cloth tapes are strong and offer good conformability
* All cloth tapes from Advance Tapes have non-corrosive adhesives keeping any reaction with the surface applied down to a minimum
* Some cloth tapes will peel clean from surfaces, usually polycoated tapes perform better in this respect although surfaces should be tested if this is critical
* If you wish to write on the tape for identification purposes, uncoated cloth tapes may be the best choice. Alternatively, tapes with a matt surface will perform better than gloss coated tapes. Please request a sample to test if this is an important factor in choosing the tape
* Cloth tapes should be applied at between +10°C and +40°C
* Surfaces should also be as clean and dry with any loose material and dust removed as far as possible
* Tapes should be stored at a temperature of no lower than +5°C. If tape is left in a van or unheated warehouse in the winter months, it will need time to warm up prior to application
* The most popular colours for cloth tapes are black, silver and white. For a much wider range of colours, polycoated tapes offer the best choice.
|
|
Line Marking Tape
- A highly visible hardwearing PVC film
- Produces durable conformable bright lines
- Quick and easy application with negligible downtime
- Suitable for use on a vast range of internal floors
- Available in Solid colours or stripes
- Easily applied using Easyline Line Marking Tape Applicaton
|
|
tesa offers a comprehensive range of adhesive tapes for a wide variety of packaging applications. From sealing cardboard boxes and cartons, padded envelopes, inner packaging of boxes and bags, to security sealing of cartons, you can count on tesa's line of packaging tapes to protect your valuable packages throughout every step of the logistical chain.
|
|
tesa manufactures a full range of tear tapes with a variety of backing types, thickness grades, release systems, and adhesive properties ideal for a variety of board types, and thickness grades. Long length rolls, up to 40,000m, reduce the frequency of spool changes.
|
|
|
|
|
|
VITOCOLL unsupported transfer adhesive tapes and VITOCOLL double-side self-adhesive supported tapes are conceived for the adhesion and lamination of materials such as metals, plastics, glass and paper; in addition they are recommendable flor the adhesion of signboards, set forms, labels, emblems, badges, decorative battens and front plates/panels.
The very thin adhesive films (from 0,05 up to o,13 mm) permit the adhesion of thin materials without influencing substantially the total dimensional conception.
The capability characteristics of double-side self-adhesive
supported tapes differ in their characteristics in the first line by the applied supporting materials and they permit, for example, the coating of an adhesive tape with different adhesives on the respective sides - one side coated with a string adhesive and the other side coated with a low-tack andhesive.
The following adhesive tapes which, owing to their chemical composition, fulfil different technical requirements, are to be distinguished.
Pure acrylate - Modified acrylate - Synthetic rubber
As regards dimensions or other points of the various VITOCOLL qualitities, please refer to our produkt information.
|
|
|
The requirements placed on plate mounting tapes leave no room for half measures: the tapes must be as adaptable as the applications themselves. This is why the tesa Softprint Toolbox is the best possible solution for plate mounting. Available in both 380µm/15 mil. and 500 µm/20 mil. categories and comprising tapes of different foam properties, the Softprint Toolbox offers the tape that best fits your application.
|
|
Nextel™ Woven Tapes are made from the same high-quality, continuous alumina-boria-silica fibers that have made 3M™ Nextel™ Ceramic Textiles the best solution for high temperature applications. They provide simplicity and dependability at two different high-temperature limits: 2012° F (1100°C), and 2500°F (1370°C).
Typical applications include:
- Electrical insulation
- Hose protection
- Fire zone cable protection
- Pipe wrap
- Automotive
|
|
|
Backing high pressure sensitive adhesive or conductive adhesive on our shielding fabrics,copper foil or aluminium foil.It often used on note-book CABLE wire material , on LCDPDP wire material , cell-phone wire material.The width and length of the tape are made as your requirements.
|
|
3M™ Single Coated Foam Tape
High-tack, pressure-sensitive acrylic adhesive on one side of a strip of urethane or vinyl foam bonds the foam to most surfaces. For gasketing, sealing, baffling, cushioning and insulation. Select varying thicknesses of high- or low-density open cell urethane, and high- or medium-density closed cell vinyl.
|
|
|
This family of rugged cloth tapes provide adhesion to most surfaces in a variety of environments, including moisture and UV. Specific tapes may be used in specialty applications, like outdoors, offering clean removal for up to 6 months.
|
|
|
3M™ Adhesive Transfer Tapes are rolls of pressure-sensitive adhesive pre-applied to a special release liner. For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off.
|
|
|
|
|
|
* All cloth tapes are strong and offer good conformability
* All cloth tapes from Advance Tapes have non-corrosive adhesives keeping any reaction with the surface applied down to a minimum
* Some cloth tapes will peel clean from surfaces, usually polycoated tapes perform better in this respect although surfaces should be tested if this is critical
* If you wish to write on the tape for identification purposes, uncoated cloth tapes may be the best choice. Alternatively, tapes with a matt surface will perform better than gloss coated tapes. Please request a sample to test if this is an important factor in choosing the tape
* Cloth tapes should be applied at between +10°C and +40°C
* Surfaces should also be as clean and dry with any loose material and dust removed as far as possible
* Tapes should be stored at a temperature of no lower than +5°C. If tape is left in a van or unheated warehouse in the winter months, it will need time to warm up prior to application
* The most popular colours for cloth tapes are black, silver and white. For a much wider range of colours, polycoated tapes offer the best choice.
|
|
tesa offers a variety of coated cloth tapes and non-woven tapes, whose characteristics include flexibility, residue-free removal, and high adhesive levels on many surfaces. They have high physical and chemical resistance and are ideal for applications requiring abrasion resistance and waterproof traits.
|
|
|
|
|
|
Self-adhesive sealing tape conceived for the sealing of joints according DIN 18542. Stress condition groups
1 + 2.
Characteristics: precompressed, expansive, resistant to driving rain, permanently elastic, ecologically beneficial, open to diffusions
Advantages
- Easily applicable without special tools
- Uniform and retarded behaviour of the compression
- The joints are sealed in one sole operating cycle.
The application of primers, preparatory paintings or
maskings are superfluous.
- Uneveness within the joints is completely compensable
by its expansive properties
- No setting period
- No problems as regards laterial adhesion
- Subsequent treatments, such as back-filling or
smoothing are not necessary
- No supplementary applications of sealants
The application of joint sealing tapes is independent of weathering conditions. The choice of the appropriate tape dimensopms os decisive for its function. Please contact us.
Everywhere, when a sealing tape meets with specific requirements, which sufficiently correspond to an airtightness inferior to < 1,0 and when the stress condition groups according to the German industrial specification DIN 18542 are not demanded, it is recommendable to apply the VITO VDB joint sealing tape.
|
|
|
|
|
|
Argweld® Weld Backing Tape
Extending the Argweld® range of purging products, Huntingdon Fusion Techniques Limited, are providing an economical non metallic weld backing system for the backing of welds, where purging is required but not easily achieved, for quality and for supporting weld roots to improve weld bead profiles.
Typically for the welding of thin wall stainless steel sheet and vessels from one side only, the backing tape can be attached to the backside of the weld, to support the weld pool, keep the argon from the weld torch surrounding the weld pool and eliminate the need to back purge, while giving a consistent high quality underbead profile.
For purging large vessels the tremendous savings of purge gas and waiting time, pays for the use of the backing tape many times over.
The high temperature heat resistant adhesive aluminium backing foil is 75mm (3") wide and in the centre is a heat resistant band of woven glass fibre cloth 25mm (1") wide.
The glass fibre cloth has a weight of 1000 grams per square metre.
The 80 Amp tape comes in rolls of 25m (80") length and the 160 Amp tape rolls are 12.5m (40") long.
The thickest cloth will support single pass welding at weld currents up to 240 Amps, without change to the chemistry or metallurgy of the weld.
Features:
Speeds up production
Provides back purge facility
Ideal for stainless steel and alloyed metals
Saves cleaning costs
Massive purge gas savings
Eliminates weld defects
Suitable for sheet, plate, pipes and vessels
For horizontal or vertical welding
No gouging or grinding
No re-welding or rework
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
