|
|
The RAM Structural System is the only fully integrated engineering software solution with complete building analysis, design and drafting for BOTH steel and concrete structures!
The RAM/Revit link provides users with the flexibility to work with 3rd party applications.
You can watch a short demo of the link and get the RAM/Revit link for free from the Bentley Structural Team, just contact us!
|
|
|
|
|
|
A comprehensive and integrated finite element analysis and design solution, including a state-of-the-art user interface, visualization tools, and international design codes. Capable of analyzing any structure exposed to a dynamic response, soil-structure interaction, or wind, earthquake, and moving loads.
STAAD.Pro is the premier FEM analysis and design tool for any type of project including towers, culverts, plants, bridges, stadiums, and marine structures. With an array of advanced analysis capabilities including linear static, response spectra, time history, cable, and pushover and non-linear analyses, STAAD.Pro provides your engineering team with a scalable solution that will meet the demands of your project every time.
STAAD.Pro will eliminate the countless man-hours required to properly load your structure by automating the forces caused by wind, earthquakes, snow, or vehicles.
In addition, no matter what material you are using or what country you are designing your structure in, STAAD.Pro can easily accommodate your design and loading requirements, including US, European (including the Eurocodes), Nordic, Indian, and Asian codes; even special codes like AASHTO, ASCE 52, IBC and the US aluminum code can be catered to.
|
|
|
|
|
|
3Muri is a program for analysis of structures in masonry and mixed materials through a non-linear (pushover) and static analysis.
The strengths of 3Muri is its innovative computation method (FME) that is able to give more information on the structure's real behaviour to seismic actions, aside an extreme simplicity of use.
3Muri offers a drawing area for insertion of the structure with intuitive controls, an engine for the creation of computation models and their solutions, and a post-processor for immediate presentation of the results and creation of the computation report.
3Muri: directly from the most advanced research.
3Muri was created by a joint project of S.T.A. DATA and the research group headed by Professor Sergio Lagomarsino, from the Construction Technique department of Genova University.
Along with other specialists (eng. Andrea Penna and eng. Alessandro Galasco from Pavia's Eucentre, and eng. Serena Cattari, Genova University) they finalized the theoretical aspects of 3Muri through laboratory's experiments and analysis on real structures.
That continuous collaboration guarantee an always updated software, completely operative and reliable for the most professional requirement.
|
|
The architecture of the Mercator solution
Mercator acts as an assembly and output engine to any GIS, CAD or even DTP system or combination of these.
Setting up a Mercator workflow happens as follows:
- Design your map symbology interactively in a true WYSIWIG environment (What You See Is What You Get)
- Determine normalization rules for the GIS and/or CAD data sources.
* Scale
* Position
* Object reclassification
* Geometric adjustments
* Etc.
- Determine handling rules for DTP and raster data.
* Size
* Position
* Ink handling
* Cleaning
* Etc.
- Compile a soft or hard copy proof for final approval of workflow results.
- Determine the preferred output settings. By default this will be a PDF. If desired CMYK, RGB, Bitmap or greyscale TIFF images can also be created.
|
|
|
|
|
|
The RAM Structural System is the only fully integrated engineering software solution with complete building analysis, design and drafting for BOTH steel and concrete structures!
The RAM Structural System was developed with one goal in mind: to help structural engineers produce better designs, faster. By providing powerful tools that are automated, integrated, and a complete alternative to traditional design methods, the RAM Structural System has accomplished this goal.
The RAM Structural System is currently increasing the productivity of thousands of engineers worldwide in the design of a wide variety of institutional, commercial, retail, residential and industrial building structures, from one story buildings to some of the tallest structures in the world.
Used by thousands of design firms, steel fabricators, educators, and others; from one-person firms to some of the largest E&C companies in the world, the RAM Structural System is helping to redefine how engineers work!
Unlike most structural software packages that solve only specific and isolated problems, the RAM Structural System is a fully integrated solution. It enhances your work every step of the way, integrating gravity and lateral analysis and design with the creation of detailed and usable CAD drawings.
|
|
STAAD.offshore Tools:
- Wave Loading
- Transportation Loading
- API Code Checkin
Specific benefits to the design of offshore steel structures when using STAAD.offshore:
Full library of standard section profiles, user tables and section property calculator.
Staad.offshore waveload calculator.
Staad.offshore transportation inertia loading.
Static, elastic, seismic and dynamic analysis.
STAAD.Pro meets the rigid requirements of NUPIC/NRC by conforming to the 10CFR PART 50, Appendix B, Section II: "Quality Assurance Program" and ASME NQA-a-2000 (QA requirements for nuclear facility applications) standards.
|
|
|
|
|
|
Bentley Architecture is an advanced, yet intuitive and easy-to-use architectural building information modeling (BIM) application that empowers architects and designers to create with unlimited freedom, to explore more design options, to make better informed design decisions, and to predict costs and performance. Design and construction documents are automatically coordinated, eliminating errors and omissions. So, architectural and AE firms can deliver better buildings on time and on budget, thus improving client services and increasing revenue – business-critical benefits in today’s competitive environment.
Unlike stand-alone architectural applications offered by most vendors, Bentley Architecture is part of Bentley's integrated suite of Building Information Modeling (BIM) applications that provide seamless integration between design, engineering, analysis, construction, and operations for the entire lifecycle of facilities. Used by the world’s leading architectural, engineering, and construction companies on the largest and most complex projects, this unique solution supports multi-disciplinary workgroups and global teams in a managed environment, allowing them to build as one.
|
|
|
|
|
|
Bentley speedikon Architectural is a fast, powerful, and integrated Building Information Modeling (BIM) application for building design and construction documentation of new and existing structures of any size and complexity, such as offices, airports, hospitals, and manufacturing plants.
Task-oriented functionality supports all project phases, from building design to input of as-built data, from detailed construction documentation and quantity take-off with export to tender documentation applications to photo-realistic design visualization.
Available for MicroStation and AutoCAD as well as a stand-alone program for Windows with a virtually identical user interface, Bentley speedikon Architectural is based on the concept of a 3D building model (BIM) with intelligent construction elements, with an option to work in 2D or 3D. At the touch of a button, floor plans, sections, and elevations at different scales and different depth of detail can be generated using the unique speedikon display filter® technology. Supporting a multi-discipline project environment, Bentley speedikon Architectural also allows the creation of information for facility management.
|
|
|
|
|
|
AutoCAD® Architecture software, the version of AutoCAD® software created for architects, supports a faster way of working. Purpose-built features for architectural design and drafting help you create construction documents more efficiently within the familiar AutoCAD environment.
Overview
Up and Running, Right Away
AutoCAD® Architecture software provides AutoCAD-based design and documentation productivity specifically for architects. You now have more tools to automate drafting tasks and create your architectural documentation faster.
- Designed specifically for architects-Work in the familiar AutoCAD environment, using tools that are purpose-built for architectural design and drafting.
- Get immediate productivity-Begin using AutoCAD Architecture software with minimal training, creating documentation, drawings, and schedules faster, with fewer errors, and in a software environment you already know. Make a smooth transition to more advanced features at your own pace.
- Collaborate smoothly-Exchange information easily using the industry-leading DWG™ file format, and use integrated rendering tools to create lifelike design visualizations that enhance communication with clients.
|
|
Bentley’s ProSteel v18 is a 3D modeling environment for structural steel and metal work supporting your construction and planning tasks.
Working on both MicroStation and AutoCAD platforms, you get an intuitive and integrated multi-material modeler perfectly suited to layout complex structures, produce shop drawings, assemble all your connections and manage your bill of materials.
From initial planning and design to assembly, ProSteel is a comprehensive software built by engineers experienced with steel design. Our many years of experience in the field of AutoCAD development and the close contact with our users has contributed to ProSteel becoming an internationally recognized and important application for 3D structural steel and metal work.
|
|
| ... products without technical information |
| |
- Handy EDM head
- Extended internal memory (max.50000 points)
- High accuracy and long measuring range
- Complete application programs
- Convenient data management system
- Electronic auto compensator
- Long-time working battery
- Superior waterproof and dustproof
- Laser centering and laser directing
- Reflectorless distance measurement available
|
|
|
|
|
|
Leica TPS400 Series - easy, quick, reliable
The TPS400 is specifically designed for the construction site. They are very easy to use and impress by a high level of functionality. It requires minimum time to learn operating the TPS400.
The optimized concept with simplified operational procedures sets new standards. Now with the new TCR400ultra versions reflectorless measurements up to more than 1000 m are possible.
Classes of accuracy: 3", 5", 7"
To meet your individual requirements
Software that runs onboard the TPS400 instruments:
Survey with coding
Tie Distance
Free-station / Resection / Orientation
Hidden_Point
Area (3D), Volume
Target Offset
Reference Line
Construction
Stake-out
Height Transfer
Hidden Point
Auto-start Routine
Remote Height
Cogo
direct.dxf
With Direct.dxf functionality, data can be read directly from the instrument in dxf-format and read into AutoCAD® on a PC without any intermediate steps. Coordinates and point numbers can be stored in different layers.
Theft protection
The PIN-code feature prevent unauthorized persons from using the instrument. This increases your data security. Without correct code, the equipment cannot be operated, data erased and makes it unattractive to steal. This protects you from having damages, increases your safety and possibly low-ers your insurance rates.
Multilingual function
Does your crew speak different languages? Ours does.The Leica TPS400 is the only instrument of its class with multiple languages onboard.
|
|
Leica RedLine
The future of construction positioning
From office to field and back again the new RedlLine product range has the perfect solution for all your construction site design and positioning needs: The unique modular system design allows the same sensors to be used across the entire construction site
* Design and data manipulation
* Control establishment
* Base Station set-up (or use network corrections)
* GNSS rover solutions (set-out and as-built surveys)
* GNSS foreman car/quad navigation
* GNSS machine control (more machines covered)
* Tracker machine control (more machines covered)
* Total station surveys (set-out and as-built surveys, one man, two man options available)
All controlled by the same simple user interface designed specifically with the construction site in mind.
|
|
|
|
|
|
The Leica GPS900 uses Leica Geosystems’ proven GPS technology. Consisting of a Leica RX900c Color Controller and a Leica ATX900 GG GNSS Antenna the all-on-the-pole GPS900 RTK rover is ideal for one-person stakeout and topographic tasks.
With its flexible, easy-to-use onboard software, Leica GPS900 is the ideal solution for a wide range of jobs including foundation and drainage work, alignment stakeout, topographic and as-built surveys. For the one-man-team, Leica GPS900 is easy to setup and use.
Control/Reference Line
Stakeout and measure relative to lines and arcs. Enter offsets and heights. Control/Reference lines can be defined using the map-view. Set checks for quality control. Ideal for buildings, drainage, foundations etc.
Stakeout
Stakeout points and digital terrain models (DTMs) with the stakeout program. Navigate directly using the map-view or using the large bull’s-eye.
Topographic Survey
Record points with or without code and attribute information. Set criteria and measure points automatically. View the survey in the large, graphical map-view display. Use the Survey program for detail, topo, title surveys etc.
Alignment
Stakeout relative to a 3D alignment using the RoadRunner option. Points can be staked out at any chainage (stationing) and offset. Work with any combination of geometric elements.
Easy-to-use
The Leica GPS900 is easy to use. The GPS900 rover is lightweight and optimised to reduce operator fatigue. The icon-based, graphical onboard software can be easily operated using the ¼ VGA touchscreen. Import and export functionality allows the instrument to be compatible with Leica TPS400, Leica TPS800 and System 1200 TPS and GPS.
|
|
Sokkia's construction total stations bring you everything you need. The required applications, lightweight and compact body design and easy operation of the instrument.
It's up to the user to select the right model selecting between reflectorless or non-reflectorless models and/or simple or full alpha-numeric keyboards. Do you need illuminated keyboards or even a wireless keyboard? Wireless data communication with Bluetooth wireless technology? Sokkia can offer everything you.
All Sokkia reflectorless total stations feature the unique RED-tech EDM, the best and most accurate distance meter in the surveying industry. RED-tech stands for high-accurate pinpoint distance measurement using laser light.
For more information, visit the Sokkia website.
|
|
|
|
|
|
Simply Rugged, Simply Accurate, Simply Trimble: Trimble M3 Total Station
The Trimble® M3 mechanical total station combines tough construction with practical hardware and software functionality. When you arrive on the job site, just pull the Trimble® M3 Total Station out of its ruggedized case and get to work. This rugged and reliable mechanical total station delivers fast, accurate measurments whatever the conditions.
The Trimble M3 Total Station is also extremely easy to use. Its intuitive software and workflow mean your crew won't lose time and productivity on a steep learning curve.
By the Surveyors at Trimble for Surveyors Like You
Only a surveyor knows what a surveyor needs. And at Trimble, qualified surveyors develop products they know will help surveying professionals like you get the job done ... every time. So when you're investing in a total station, Trimble is the name you can trust. The Trimble M3 Total Station gives you access to Trimble's long reputation in developing the highest quality surveying instruments. And our 24/7 worldwide support means you're never alone; the surveyors at Trimble are ready to lend a hand whenever you need it.
|
|
The Trimble® SPS710 and SPS610 Robotic Total Stations help contractors perform layout tasks significantly more efficiently than with conventional mechanical systems for residential and building construction. Designed specifically for concrete and general construction contractors, the Trimble SPS710 and SPS610 total stations offer construction-specific functionality and one-person operation so you can perform all jobsite layout and measurement tasks for maximum flexibility and cost savings.
Applications:
* Layout of control
* Checking or typing into property boundaries
* Layout of excavation lines
* Layout of concrete forms and anchor
* As-built checks
* Layout of control lines on concrete paid for subcontractor
* Light topographical measurements
|
|
|
The Sokkia Series 30R Reflectorless Total Station is able to do pinpoint, high accuracy measurements at locations that are difficult to reach. Measurements to corners of objects, high-voltage electricity wires and a building face survey are examples of the precision this series can offer, all with the convenience of Bluetooth wireless technology.
|
|
|
|
|
|
MIKROFYN 3D
- Machine Guidance
In short – a MIKROFYN Machine Control and 3D Guidance System will improve your productivity.
It will ensure a more accurate and faster working procedure.
This will result in fever mistakes and reduction of the subsequent costly corrective actions. You will experience that downtime is reduced considerably, that survey costs will drop and that your productivity and best off all – your profit will be significantly improved.
All MIKROFYN Machine Control Systems are prepared for adding on a 3D guidance system comprising a rugged computer, 3D modeling software and 3D positioning of the machine by either RTK GPS or a robotic total station. The modular design of all MIKROFYN Machine Control Systems will enable the user to move a 3D guidance system between different machines, equipped with any MIKROFYN Machine Control System.
A MIKROFYN Machine Control System provides control with the highest possible accuracy. In combination with a 3D guidance system you will gain absolute control of the machine position and attitude in all three dimensions.
|
|
|
|
|
|
The robust Trimble LR400 receiver combined with the GL700 transmitter is designed specifically for earthmoving applications performed with larger machines like dozers, scrapers and excavators. The receiver features center on-grade for use with dozers and scrapers and an "excavator mode" for use with excavators and backhoes. Using the excavator mode, more above-grade information is displayed making it easier for the operator to lower the bucket and cut to the correct grade.
Features & Benefits:
-Large LED display arrows indicate "high" or "low" with amber lights and "on-grade" with green lights so the operator can quickly and easily move the cutting edge to a desired elevation, especially on larger machines such as excavators, dozers and scrapers, for improved productivity.
-Adjustable accuracy bandwidths and distinct modes for specific applications and equipment provide flexibility to meet the machine needs and the accuracy requirements of the job.
-Selectable "on-grade" location and accuracy indicators provide improved efficiency and allow customization of the receiver to each unique application.
-Rugged, waterproof magnesium housing withstands tough jobsite conditions.
-Powered using its own battery or using the machine's battery.
Applications:
Site prep
Building pads
Sewage and storm drains
Landfill sites
Balancing materials
|
|
Mikrofyn Laser Receivers
A laser receiver system consists of two primary components - a rotation laser and a laser receiver mounted on the machine. MIKROFYN offers just the right receiver for your needs, and they are all very simple to operate.
The MD 40 and MD 10 Laser Receivers can be combined with our various Machine Control systems.
In a number of countries we can also deliver the MD 3 Laser Receiver, which features plum indicators for increased accuracy.
|
|
The RL-H3A/H3B series is rotating lasers that inherit the features of RL-HA/HB which enjoyed a high reputation because of accurate detection of control positions by automatic leveling, waterproof design and other features. The new series features reinforced basic performance and functions.
Horizontal accuracy particularly is boosted to ±8″ for RL-H3A and ±10″ for RL-H3B for more reliable leveling in interior finishing work, architecture, construction and civil engineering. A higher work efficiency is assured when level sensors are used.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
