Aerosol lubricants

Operating temperature: -20 °C - 140 °C
Viscosity: 0.000068 m²/s

Multipurpose lubricant for daily lubrication Water resistant - Antioxidant properties Propellant CO2 T° range of use: -20 / +140 °C Certifications NSF H1

Operating temperature: -20 °C - 150 °C
Viscosity: 0.00012 m²/s
Flash point: 245 °C

Excellent adherence on metal surfaces Water resistant - Extreme Pressure properties - Anticorrosion Develloped for Bearings, hinges, springs, chains, tools Propellant CO2 HFO-1234ze T° range of use: -20 / +150 °C Certifications NSF H1

Operating temperature: -35 °C - 160 °C

Multipurpose grease for all applications in severe conditions Resistant to severe temperature / humidity / chemical conditions - Synthetic Propellant CO2 T° range of use: -35 / +160 °C Certifications: NSF H1

Operating temperature: -20 °C - 130 °C

Operating temperature: -20 °C - 150 °C
Flash point: 0 °C

Pour point: -6 °C
Flash point: 250 °C

... ecological characteristics, formulated with natural base components. It is formulated specifically for Minimum Quantity Lubrication systems, and it is ideal generic cutting operations. Its composition contributes ...

Operating temperature: -30 °C - 120 °C
Viscosity: 11, 0.00001 m²/s

Universal grease with white solid lubricants. Areas of application Lubrication of moving parts at fine-mechanical devices as well as household appliances Advantages and benefits Lubrication ...

Operating temperature: -30 °C - 100 °C

OKS 491 is an open gear spray for dry lubrication of slowly-turning, open pinion gears and steel cables etc. subjected to high pressures, dust or corrosive influences, such as outdoor weathering. Areas ...

Operating temperature: -40 °C - 200 °C
Viscosity: 0.0038, 0.0095 m²/s

... carefully clean the lubricating point, e.g. with OKS 2610/OKS 2611 universal cleaner. Spray directly onto lubricating point and let the solvent evaporate. Avoid excesses. Observe the ...

Flash point: 30 °C

Excellent wet film release, anti-corrosion and lubricating fluid with very low residue. 400 grams, 1 kg, 5 kg, 18 kg, 45 kg, 185 kg, Box 28 cartridges, Applications Specially designed for corrosion protection of metals: ...

Operating temperature: -20 °C - 120 °C
Pour point: 200 °C

Multi-purpose lubricating grease with high E.P. and Teflon additives that secures and protects machinery even when there is a lack of lubrication. Case 12 aerosols, Case 25 aerosols, ...

Operating temperature: -30 °C - 150 °C
Flash point: 230 °C

... additives. Case 12 aerosols, Case 25 aerosols, Unit Applications - Bearing impregnator - Anti-cracking in cast iron - Lubricant additive for drawing, threading and cutting lubricants ...

... shear spray lubricant is the first of a series intervening in the hollow glass manufacturing process. It will define, along the kind of water, of mixing and distribution system in place, the level of ...

Operating temperature: -30 °C - 150 °C

... ROCOL CHAIN & DRIVE Spray is a highly versatile, high performance, spray lubricant suitable for all types of drive and conveyor chains in a convenient aerosol can. The ...

Operating temperature: -30 °C - 180 °C

... wet and humid conditions Good water displacing properties Highly water repellent CHAINGUARD Hi-Load Spray is a high load aerosol chain lubricant containing molybdenum disulphide ...

Operating temperature: -25 °C - 280 °C

Food Grade, High Performance, EP Lubricant Fortified with PTFE Extremely stable at high temperatures Greatly extends lubrication intervals Excellent chemical and solvent resistance Excellent high ...

Stainless steel maintenance oil Ready-to-use, pure protection and care oil for stainless steel, aluminium and non-ferrous metals. It leaves a slightly gleaming film on the surfaces that protects from fresh contamination. Subsequent ...

... metals. The Cutting Oil features an efficient cooling- and lubricating effect, which improves the finish quality of the work pieces and extends tool/mould service lives. Sprayed from the aerosol can as ...

Short-term corrosion inhibitor. Indoor protection up to 6 months. Multipurpose corrosion inhibitor with water repellant and lubricating properties. Forms a thin, almost invisible and long-lasting protective film against ...

Biodegradable cutting oil. Natural straight oil, free of chlorine, for cutting operations in ferro, non-ferro and aluminium. Cools by transferring heat away from cutting tools, reduces heat created by friction and removes shavings ...

Operating temperature: -40 °C - 180 °C

High pressure lubricant. Synthetic NLGI 2 grease, highly charged with extreme pressure additives. Highly stable with long service life. Excellent water resistance. Functional over a wide temperature range: -40 °C to ...

Operating temperature: -10 °C - 150 °C

Special oil that forms a highly viscous and adhesive film containing graphite. This spray is not sensitive to heat, acid and salt solutions and is water-resistant. Benefits Ensures a plastic semi-dry film that ...

Operating temperature: -20 °C - 150 °C

Thin silicon oil, suitable for applications where attachment between various substances is to be avoided, and sliding is required. Benefits Good thermal stability. Insulating properties. Very low friction coefficient. ...

Operating temperature: -20 °C - 140 °C

Multifunctional grease for general use. This spray is suitable for lubricating machine components that are difficult to access (not for use in the food sector). Benefits Multifunctional. ...

Operating temperature: -40 °C - 260 °C

... to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used ...

White grease spray with PTFEArt.No.: WS-267A permanently lubricating, high-performance grease for all moving parts, sliding parts and friction surfaces. A perfect adhesive lubrication for chains, gears, ...