Aftercoolers

Maximum temperature: 5 °F - 20 °F
Pressure: 0 psi - 250 psi

... and water-cooled aftercoolers Aftercoolers cool air immediately after it is discharged from the compressor to condense water vapor out of the compressed air. While all Kaeser rotary screw compressors ...

Power: 20 W - 1,300 W
Maximum temperature: 25, 45 °C
Flow rate: 60 m³/h - 4,500 m³/h

60Hz version available on all models RA10-160 - NPT connections RA300-750 - ANSI connections All models are available also without separator, motro or frame The widely sized heat exchanger and powerful electrical ...

Maximum temperature: 10 °C - 200 °C
Flow rate: 0.6 m³/min - 38.7 m³/min
Pressure: 10, 16 bar

... compressed air, which can be separated thanks to an AS/MS centrifugal condensate separator installed at the aftercooler outlet. The AF air aftercoolers are made up from a heat exchanger with finned coil, ...

Power: 22, 37, 7, 15 kW
Maximum temperature: 40 °C
Flow rate: 1,000, 3,300, 2,200, 5,700 l/min

SMC's series HAA, an air cooled aftercooler, is compact and lightweight using minimal floor space. The HAA can cool high temperature compressed air from compressors down to 40°C or less while efficiently removing moisture ...

Flow rate: 28.88 m³/h - 5,757.94 m³/h
Pressure: 10.5 bar - 20 bar

... install HD and TD aftercoolers High reliability Completely constructed from rustproof material, HD and TD aftercoolers offer a long lifetime of reliable operation Minimal maintenance You can ...

Maximum temperature: 0 °C - 120 °C
Flow rate: 78 m³/h - 3,700 m³/h
Pressure: 16 bar

Data refer to the following nominal conditions • Ambient temperature: 25°C • Inlet air pressure: 7 barg This range of air cooled - after cooler uses a high-efficiency aluminium cooler rather than to the classic coil copper pipes normally ...

Flow rate: 450 ft³/min - 1,600 ft³/min

Aftercooler with air driven fan motor Lowers temperature of air leaving the compressor to within 10F to 15F of ambient temperature Eliminates 75% of water Separator/filter Two stage filtration First ...

Flow rate: 1 m³/min - 2 m³/min

... drops. These drops are removed by the aftercooler’s centrifugal separator. For even better clean air-results, optional compressed air filters can be fitted to remove oil and other containments. The aftercooler ...

Maximum temperature: 7 °C - 8 °C
Flow rate: 28.88 m³/h - 5,757.94 m³/h
Pressure: 10.5 bar - 20 bar

... your air is at a temperature suitable for most types of air dryers. TD air-cooled aftercooler Benefits Compressor aftercooler benefits Energy efficient aftercoolers A negligible ...

Maximum temperature: 200 °C
Flow rate: 21 ft³/min - 2,648 ft³/min
Pressure: 16 bar

... Hypercool range of air cooled aftercoolers represents a cost effective solution to easily remove water vapour from compressed air and cool it to safe usable levels for many industrial applications. Hypercool air cooled ...

Maximum temperature: 20 °C - 120 °C
Flow rate: 72 m³/h
Pressure: 16 bar

incl. Cyclon sperator & aut.condensate drain The aftercooler is supplied with cyclone sparator and automatic, level controlled condensate drain. The nominal volume refers to proper operating conditions (air inlet ...

Maximum temperature: 120 °C - 170 °C
Flow rate: 66 m³/h - 4,500 m³/h
Pressure: 15 bar

Air cooled aftercoolers series ACA are designed to reduce compressed air temperature and water vapour dew point in compressed air system. High efficiency axial fan forces ambient air over the heat exchangers copper tubes ...