|
|
Technical description:
• Mounting and dismounting of the agitator when the wine tank is full after connection on your ball valve. The shaft has to be slided inside the tank. The propeller fans out when rotation.
• Motor : 1.1 kW, 1.5 kW or 2.2 kW-230/400V-50Hz
• Sealing : mechanical seal
• Handiness : carrying handle
• Integrated on/off switch on motor electric terminal box
• Hands safety device
Design, manufacturing and tests in our workshops.
|
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
Agitators
This is one of the most comprehensive agitator lines in the industry, including fast seal removal, coaxial with independent drives, magnetic drive for non-polluting production and sterile product treatment, side entry, and compact designs. Many options are available, including standard or customized agitators, as well as systems.
The manufacturer is one of the world's leaders in agitator engineering and is 9001 certified.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
From 30KW to 1000KW and 15RPM -300RPM
Ideal for medium-capacity mixing needs, the rugged RAM MDX has been performance-proven through years of operation in a diverse range of demanding installations.
|
|
|
|
|
|
Vessel Process
VMI-Rayneri offers a wide range of manufacturing stations (formulation bowls, dissolution bowls, suspension bowls, storage bowls, heaters) aligning a blending system at 1, 2 or 3 movements as required and a bowl equipped with specific functionalities: - vacuum / pressure- heating / cooling- spring balance
The simple agitators are made from the range of VMI-Rayneri agitators, according to the specificity of the mixture to achieve.
The product agitations of more complex rheology and/or implementing thermal exchanges can be achieved by systems of the Multimix line.
The products requiring a simultaneous action of circulation and shearing effects can be obtained from the Trimix range of machines, combining the effect of a central agitator, a bowl scraper and an emulsifier/disperser in bottom ofvessel.
The all stainless steel Heaters proposed by VMI-Rayneri, designed for melting of blocks, sequins, etc..., integrate an electrical heating as well as an agitation of anchor type promoting thermal exchange. The ergonomic design of these heaters allows easy block loading, and they can evolve into real temperature-controlled bowls, integrating an optional disperser or a cooler.
|
|
|
|
|
|
Series 400 mixers deliver a superior combination of value and performance in a wide range of applications.
* Designed for small-capacity, tough-duty mixing applications, the SK4000 series gearmotor is a hollow shaft unit for top or side entry applications. It incorporates many of the same construction and performance features found on our medium-and large-capacity mixer drives.
* Rugged Cast-Iron Housing to accept mixing stresses while maintaining accurate gear alignment and resisting corrosion.
* All-helical gearing is designed for high efficiency and maximum load-carrying capacity with reserve strength rating.
* No-Leak Drywell Construction, Oil sump is isolated from output shaft to prevent gear lubricants from leaking and contaminating the product being mixed.
* Available from 1 to 25 HP with speeds from 10 to 187 RPM
* Choose from a wide variety of motor options, including explosion-proof and multiple-speed units
* Compact design with fewer parts for easy installation and maintenance
* Check, add or change oil without removing the safety guard
* Largest bearings in the size range provide unmatched L10 life exceeding 100,000 hours
* Unique output shaft connection reduces shaft deflection to extend seal life
* Longer shaft lengths accommodate a wider range of tank configurations
* Leak proof reducer design
|
|
Agitator for digestion or methanization tank
Sludge coming from waste water plants is full of methane.
In order to reduce volume of sludge (30 to 40%) and to deodorize it, sludge is transformed inside a digestion or methanization tank.
An agitator turns in this heated tank, separating methane from sludge. This methane is collected at the top of the tank and used to heat tank.
Then, digested sludge is dehydrated and used to fertilize agricultural soil.
MIXEL has designed a new agitator for equipping digestion or methanization tank:
- vertical agitator, with double level of propellers (TTF profiles propellers, with converging edge to avoid aggregation of tows;
- agitation shaft up to 20 m
- hydraulic seal
- Guiding turret.
MIXEL has equipped up to 5000 m³ digestion tanks, in France, Algeria and Marocco.
|
|
AGIPRO - Portable agitator with clamp
Are you looking for a vertical, economical, light and practical agitator, easy to handle from a tank to another?
The set MIXEL ‹ Agipro quick agitator with clamp for fixing on tank edge › is made for you.
The fixing clamp has been especially designed to be heavy-duty and for safe use. It can be easily fixed on tank edge and does not vibrate when agitator works.
This clamp fits to the following sizes of agitator:
- Agipro AP 125 - Tank from 0.5 to 1.5 m³ - 0.75 Kw at 1500 rpm - weight 15 kg
- Agipro AP 250 - Tank from 1.5 to 3 m³- 0.37 Kw at 280 rpm - weight 20 kg
- Agipro AP 400 - Tank from 3 to 5 m³ - 0.55 Kw at 145 rpm - weight 30 kg
|
|
In the delivery state (clamping ring barrel) the material is prepared and conditioned for use and transfer to the spray gun. Due to the pneumatic lid lifter, an empty barrel can be replaced easily with a full one. System components:
- Lid for attaching apparatus
- Pneumatic lid lifting device
- Agitator (electric or pneumatic powered)
- Pump with material filter
- Agitator switch off when lid is lifted pneumatically
- Compressed air fittings
All agitators are tested and certified in accordance with ATEX 94/9/EC. Versions without explosion protection are also available.
10 years of delivery guarantee for spare parts
|
|
(speed rotating electric-agitators removable and swivel angle)
Advantages of those agitators : they will help you, not only to resolve your mixing problems, but will make their maintenance easier.
1. EFFECTIVE
- mixers claimed by satisfied customers
2. ROBUST
- designed to long with time resistant components
3. WITHOUT MAINTENANCE
- 20 000 h of operation without maintenance
- lubricated bearings for life
4. THREE STANDARD MODELS
- power 0.37 kW, 0.5 and 0.75 kW
5. EASY SETTING OF THE MIXER ON THE TANK
- claw device to tighten as vise principle
6. FAST DISASSEMBLING/REASSEMBLY OF THE SHAFT
- tightening with chuck
7. SHAFT AND PROPELLER
- stainless steel or any other material on request
Design, manufacturing and tests in our workshops.
|
|
The new Enhanced Classic Line (ECL) mixer gives our customer an even stronger and more flexible product. Never before has there been a range of mixers offering so much quality and value.
Direct- and gear-drive mixers for a wide range of mixing applications
Direct-drive mixers are recommended for dispersing powders and small batch mixing
Gear-drive mixers feature two available lower speeds and higher torque for use with larger batches and a range of viscosities
Larger output shaft bearings for longer shafts and longer life
Positive chuck grips the mixer shaft to prevent unintentional shaft release
|
|
|
|
|
|
Mixers for dispersion
The mixing of very thick products and the dispersion of highly loaded ingredients are complex subjects that have been VMI Rayneri's specialty for many years.
The Supermix II, have been specially designed to achieve dispersions of solids in liquids, such as typically used in the manufacture of paints, inks, varnishes and other covering coatings.
The adjustable Multimix, dual coaxial movement blenders (slow/slow or slow/fast) mounted on an adjustable head allow the pasting and the dispersal of high viscosity products. Their fixed cover allows them to work in vacuum mode or under pressure.
Combining the characteristics of a slow agitation to a rapid agitation, Dual Rotor Dispersers (DRD) are the production tools par excellence for plastisol, inks, mastics or complex coating products. They are made of a pendular tool of slow mixing (butterfly type), homogenizing the product without heating it, and of a second off center shaft, equipped with a radial flow blade (deflocculator type for example), favoring the dispersion of solid particles within the viscous mixture.
|
|
AGIPRO - MIXEL Agitator for container
Are you looking for THE economical and efficient tool to mix liquids into 1000 litres cube-like containers?
The set < Agipro 125 quick agitator with fixing holder for container › is made for you.
The fixing holder has been especially designed to enforce stability of the AGIPRO agitator and to maintain it on a 1000 litres cube-like container in total safety. You can use Agipro 125 quick agitator for mixing, homogenization, storage or suspending solids into liquid.
The MIXEL agitator AGIPRO 125 (or AP 125) is designed to mix liquids into 0.5 to 1.5 m³ tanks.
Technical specifications:
- MIXEL TT type propeller – diam. 125 mm
- Motorization 0.75 Kw at 1500 rpm
- Agitation shaft length 1200 mm
|
|
| ... products without technical information |
| |
FinnSonic FSG-121 is a reliable medium power ultrasonic generator with Power Booster and Frequency Sweep.
It's unique Power Booster gives additional boost for tough cleaning applications. FinnSonic FSG-121 is available in 30 kHz or 40 kHz frequency.
Features
* 1,2 kW nominal ultrasonic power
* Available in 30 kHz or 40 kHz frequency
* Cabinet mounting
* Power, Sweep and Booster controls with outer signals
* Protection and automatic reset against short circuit, overcurrent, low voltage and overtemperature.
|
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
|
|
|
|
State of the Art Ultrasonic Generator Technology
Blackstone-NEY Ultrasonics is a recognized leader in ultrasonic generator technology (Technical papers). Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream of development and patents covering new ultrasonic generator and transducer technology from Blackstone-NEY Ultrasonics. Entire families of generators meeting the specific needs of a growing list of applications are now available.
multiSONIK™ 2
Blackstone~NEY Ultrasonics introduces the multiSONIK™2 Multiple Frequency Ultrasonic Generator. Representing a major breakthrough in ultrasonic parts cleaning technology, the multiSONIK™2 is an advanced, digital ultrasonic generator that provides the ability to select and program single or multiple frequencies in a single process tank.
The multiSONIK™2 generator, featuring Blackstone~NEY Ultrasonics' patented dual sweep technology, can operate at frequencies of 40, 80, 120, 140, 170, 220 and 270 kHz according to a binary coded input. When it is teamed with our unique universal transducers, cleaning performance is optimized to a level that is unmatched using conventional ultrasonic cleaning hardware.
...
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
ITF ultrasonic devices are the result of many years of tests cooperating with electronic experts and have got all the advantages which up-to-dated technology can offer nowadays.
Particularly:
• Weight and volume reduction so to permit one single-card execution for any generator.
• Wide range of controls and safety features in compliance with European Standards.
• DEGAS feature reducing time taken to get baths degassing.
• Microprocessor used to manage output and variation, control and self-diagnostics. This also permits to get remote diagnostics since there is the opportunity of a modem connection, the opportunity to set output power to supply transducers of different power and the opportunity to drive more transducers with one generator.
|
|
SINAPTEC developed a complete range of generators of energy to be associated with an ultrasonic applicator.
* The NEXUS puts: this generator of power ultrasounds is a simple solution and economic in an industrial environment. Its obstruction minimum and its design allow an easy integration in a cupboard or other. The parameter setting by switches makes it possible to use the mode of frequency controlled or modulated for a homogeneous distribution of the ultrasonic field.
* The NEXUS rack: by assembly from 1 to 3 racks; Maintenance is facilitated by the maximum dismantling of the racks.1600Wc by rack. Orders on the generator or off-set.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
