Air flow: 150 m³/h - 4,900 m³/h
Rotational speed: 1,400 rpm - 2,800 rpm
GEOVENT centrifugal fan LSFG and MSFG with forward curving impeller is used for extraction within the industry or for comfort ventilation, depending on the variant. The fan is made of 100% galvanized ...
Geovent
Air flow: 250 m³/h - 24,100 m³/h
Rotational speed: 1,400 rpm - 2,800 rpm
GEOVENT centrifugal fan LEX and MEX with closed backward curving B-wheel and directly driven flange motor. The fan is used for extraction within the industry or for comfort ventilation. The fan ...
Geovent
Air flow: 250 m³/h - 23,000 m³/h
GEOVENT centrifugal fan LEX and MEX with closed backward curving B-wheel and directly driven flange motor. The fan is used for extraction within the industry or for comfort ventilation. The fan ...
Geovent
Air flow: 24 m³/h - 630 m³/h
It’s recommended an air flow from the outside towards the inside of the cabinet. The slight pressurization prevents the entrance of dust from any other openings in the closet.
Alfa Electric
Air flow: 2,700, 3,850 m³/h
... systems, or for the simple ventilation of closed rooms in extraction or under pressure (introducing air from outside), such as silos or tunnels. It consists of a high performance centrifugal fan, ...
Diameter: 1,530 mm
The NEW A fans are manufactures assembling variable pitch, wide-chord airfoil profile blades with a light aluminum alloy hub. The fans are the best choice for applications which demand high air-flows ...
HW Ventilation
Diameter: 300 mm - 1,250 mm
... equivalent hazard Dust group IIIC - Atmospheres containing conductive dust Construction Fan Highly-efficient axial impeller, tested in HW Ventilation AMCA 210-designed wind tunnel Blades: AISI ...
HW Ventilation
Diameter: 300 mm - 1,102 mm
F plastic fans are manufactured assembling variable pitch, slightly sickle profile blades with a light aluminum alloy hub. The fans are the best choice to suit a variety of applications which require ...
HW Ventilation
Choose the right fan adapted to your installation and filters. Description An efficient filtering system needs to use the right fan adapted to your installation. Airflow, velocity, power, noise level ...
Air flow: 13,500 m³/h
... downrods and blades of different sizes are available, making it possible to adapt ceiling fan ICF to almost all applications. Ceiling fan ICF pushes the warm air from the ceiling and ...
Air flow: 19,300 m³/h
... to adapt ceiling fan ICFX to almost all applications. Comfort Warm air is lighter than cold air and therefore rises towards the ceiling. In buildings with high ceilings, a cushion ...
Air flow: 0 m³/h - 18,000 m³/h
Diameter: 18 in
... each fan component – the casing, the impeller and motor – enables us to create fans that perfectly meet the requirements of high performances and low power consumptions.The wide range of different versions ...
Nicotra Gebhardt
Air flow: 8.5 m³/h - 1,000 m³/h
Noise level: 33 dB - 75 dB
FF series exhaust filter and filter fans represents a side-mounted cooling solution with filtered ambient air to maintain optimum ventilation inside the electrical cabinets. Screwless ...
Fandis
Air flow: 17,000 m³/h
Diameter: 250 mm - 630 mm
... . Free running impellers with EC motors are available depending on the size of different designs: GKHM fan built-in module GKHS fan built-in module with spider design GKHR motor impeller ...
Rosenberg Ventilatoren GmbH
Air flow: 60,000 m³/h
Diameter: 250 mm - 1,000 mm
... backward curved impellers • IEC standard motors in type 3 • can be installed in all positions • compact design Properties Fan module with motor mount and base frame. Screwed into the inlet cone and adjusted to ...
Rosenberg Ventilatoren GmbH
Air flow: 12,000 m³/h
Diameter: 315 mm - 630 mm
... result in a very low noise spectrum. The main concern was to keep noise emission low in the main range of application of the fan, while having an optimal performance curve with the long and short inlet cones. The impellers ...
Rosenberg Ventilatoren GmbH
External fan units for asynchronous and direct current motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various ...
External fan units for servo motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various connection ...
Air flow: 5,000 m³/h - 72,000 m³/h
Helione – Axial fans CE marking-compliant. Class F200 (200 °C- 120 min) and F400 (400 °C – 120 min) in accordance with EN 12101-3. Large range for car parks, commercial and industrial premises. Multiple accessories for ...
... OEM air movement needs. Our OEM experience spans a wide range of applications from custom-designed, heavy-duty fans for use in locomotives and off-highway vehicles to standardised, light duty commercial ...
Air flow: 95 m³/h - 32,400 m³/h
... cooling fan is installed Belt Drive or N8: Maximum fluid temperature allowed is 90°C or 350°C if a cooling fan is installed In case of higher temperatures, some modifications to the fan ...
Stiavelli Irio
Air flow: 180 m³/h - 115,000 m³/h
... allowed is 80°C or 150 °C if a cooling fan is installed Belt Drive: Maximum fluid temperature allowed is 90°C or 350°C if a cooling fan is installed In case of higher temperatures, some modifications ...
Stiavelli Irio
Air flow: 180 m³/h - 375,000 m³/h
... allowed is 80°C or 150 °C if a cooling fan is installed Belt Drive: Maximum fluid temperature allowed is 90°C or 350°C if a cooling fan is installed In case of higher temperatures, some modifications ...
Stiavelli Irio
Air flow: 0.07 m³/min - 0.11 m³/min
Rotational speed: 6,000 rpm - 10,000 rpm
Noise level: 18 dB - 29 dB
Frame: Thermal Plastic , UL 94V-0 Impeller: Thermal Plastic , UL 94V-0 Lead Wire:AWG#26 UL1007 ( Optional ) ( + ) : Red (-):Black Insulation Résistance: Above 10M Between Lead wire and Frame DC500V
... solution designed for a wide range of mine ventilation requirements. Seven base fan sizes combined with six different hub sizes offer the right fit for all requirements with lower costs and short lead ...
One of the most common fans in Tunnel and Metro ventilation is the Jet Fan. Based on decades of experience and extensive R&D,TLT-Turbo has developed a new generation of standardized and ...
IN LINE XSilent fan: IN LINE XSilent is an efficient and silent duct fan thanks to its steel casing and 50 mm internal insulation. IN LINE XSilent is a duct fan that allows to ventilate ...
Air flow: 0 ft³/min - 4,000 ft³/min
... and dryers can rack up unnecessary operating costs if there’s not a good rooftop ventilation solution in place. Why risk the added time and cost? The ENERVEX EFV Rooftop Fan makes venting easy – even ...
Air flow: 0 ft³/min - 30,000 ft³/min
... it impossible to use louvers to supply combustion air to a mechanical room or laundry facility. In these cases, an ENERVEX SFTA Air Supply Fan can be installed inline to ensure a constant ...
FEATURES The Breeze Fan is a High Volume Low Speed fan, engineered to circulate a vast amount of air, providing the most efficient air circulation movement ...
Munters
Air flow: 34,200 m³/h - 40,420 m³/h
EC50 cone fan, a 50" fan equipped with cone discharge, is the ideal fan for high air-flow capacity at high static pressures and low energy consumption. The unique propeller ...
Munters
Air flow: 35,650 m³/h
FEATURES EMS50 is the ideal air recirculation fan whenever extra high air movement capacity is required. The unique propeller design is self-cleaning and allows the highest efficiency ...
Munters
Air flow: 1,200 m³/h - 18,600 m³/h
... Centrifugal fan - backward inclined impeller, for clean or slightly dusty air and painting plants. Centrifugal fan with open impellers for pneumatic conveyor ...
Coral
Air flow: 1,080 m³/h - 140,000 m³/h
Coral
Air flow: 200,000 m³/h
... centrifugal fans are built to cover very widely different industrial applications in the field of ventilation, exhaust, pneumatic conveying, supplying mechanical draught for fumes and air ...
Air flow: 2,000 m³/h - 20,000 m³/h
Cell/Cabinet type Fans and Ventilators are produced in series in the desired suction and blowing directions in the capacity range of 1.000-75.000 m3 / h. The cells are made of the stone wool insulated, double walled and ...
Air flow: 10,000 m³/h - 50,000 m³/h
... Cabinet Fans are manufactured with the double-walled panels. The special chassis with 150 mm height are used under the units. The fan and the motor system are connected to the device body by means of ...
Air flow: 0.42 m³/min - 9.9 m³/min
Rotational speed: 3,000 rpm - 8,000 rpm
Noise level: 28 dB - 49 dB
... VDC axial flow fans have been designed to deliver the best in ventilation and cooling technology. With five different models (standard, alarm, long-life, variable flow and splash proof) to choose from, ...
ORIENTAL MOTOR
Air flow: 1.63 m³/min - 2.1 m³/min
Diameter: 136 mm
Rotational speed: 4,350, 5,450 rpm
Frame thickness [mm] 28 Frame material Plastic Rated voltage [V] 12 Operating voltage range [V] 10.2～13.8 Rated current [A] 0.25 Rated input [W] 3 Max. static pressure [Pa] 285 Max. static pressure[inchH2O] 1.14 Operating ...
... number of combination options. Fans with AC or GreenTech EC motor versions are available for the main areas of application, i.e. ventilation and air conditioning technology. ...
ebm-papst
Air flow: 1,206 m³/h - 1,465 m³/h
Noise level: 88 dB
... economical ventilators deliver exceptional air flow in a compact, lightweight design – and their non-corrosive injection-molded housings are nearly indestructible. The Cadet is ideal for confined space ventilation ...
COPPUS
Please specify:
Help us improve:
remaining