|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
RECUBOX is a cased heat recovery exchanger for use in transferring air and the recovery of heat from the air taken from the interior to the fresh air transferred into the interior without the two being mixed. It is intended for operation in a basic environment for the transfer of air not containing rough dust, grease, chemical vapours and other pollutants. It is an easy and effective solution leading to a higher ventilation efficiency and lower electrical energy consumption on current air conditioning systems. RECUBOX is equipped with a highly efficient plate counterflow heat recovery exchanger made from Al with an efficiency of 92%.
SPECIFICATION
- under the ceiling installation into air-conditioning duct systems
- flow rate range: 300, 500, 700, 1000, 1500 and 2000 m3/h
- effeciency up to 92 %
- pocket filter design (G4) and without filters
- sandwich cover construction casing 32mm
|
|
The ISIS Recover recuperation unit is designed for the exchange of air in households necessary for healthy breathing. It draws outside air through ducts and transfers heat to it from the exhaust air (heated in the indoor environment), without mixing the two types of air. In this way up to 60% of heat is saved. The fresh air is furthermore filtered and transferred through ducts into individual rooms. The unit draws air in the reverse direction from the room, removes heat and blows it into the outside environment.
The ISIS Recover recuperation unit is, thanks to its air output, compact dimensions and comfortable controls designed for ventilating family houses and apartments.
Specification:
air output 300 to 500 m3/h
recuperation efficiency up to 60%
low power consumption = ENERGY SAVINGS
width of unit 600 mm
equipped with an integrated heater
comes with a mechanical by pass as standard
comfortable controls using a remote control
long operational lifetime
|
|
|
|
|
|
This is a heat recovery unit, which ensures air exchange in the building, which is essential for healthy breathing. The air is sucked in from outside and heat is added from the exhaust (heated) air without this two being mixed. This saves up to 90% of the heat. Furthermore, the fresh air from outside is filtered and directed through ducting to individual rooms. In the opposite direction, the unit sucks in air from the room, takes off its heat and exhausts to it outside.
The AVENTIS heat recovery unit, with a view to its air volume output, compact dimensions and automatic regulation, is especially intended for the ventilation of smaller shops, cafes, restaurants, administrative areas, sports grounds and others.
SPECIFICATION
- Air output up to 2 400 m3/h
- Recuperation efficiency up to 90%
- Low energy demand thanks to EC motors
- Standard delivery includes sophisticated automatic regulation
- Standard delivery includes multilingual remote control (EN, FR, RU, DE)
- User friendly operation
- Quiet and economical running = safes your money
- Long life span
- Possibility to control extended electric or water heater (PID)
- Unit height 360 mm
|
|
Floor Standing Type
This space-saving design with a slim shape and smart vent line offers the least obstruction to the surrounding area.
* The unit can be easily installed on the floor along the wall or under the window. Maintenance is simple.
* This type can be hung on the wall for easier cleaning.
|
|
Ventilation unit to extract hot air from open fire place in a one family house and to distribute it in other rooms.
Range Ref. Description Detail Quot.
Groupe Air Chaud Unidébit Extraction of hot air from open fire place
Groupe Air Chaud Filtre Hot air unit with filter and drived by bimetal
|
|
Always a clean solution
Air Management Systems - competence for the entire air section
Even during the early years of the company, MAHLE recognized that effective cleaning of combustion air and lubricant is an indispensable element in improving the service life of engines and engine components. In line with this understanding, work began in 1926 on the development and production of air and oil filters. Only then was it possible to commence the reduced-wear use in series production of lightweight pistons developed by MAHLE. After having to concentrate on the core business with pistons during the war, re-entry was achieved by a participation in Knecht Filterwerke GmbH. Strong organic growth was accelerated by the acquisition of the Japanese Tennex Corporation, an important component of further expansion. This opened up markets outside Europe, with the result that today MAHLE is the number one worldwide supplier of filter products to the automobile industry.
|
|
ICHEX-Spot Cooler
Patterson's Portable Evaporative Cooler has a long air throw and can cool the ambient temperature up to 20 degrees Fahrenheit.
PBF/PSF-Portable Fogging Fan
Cool ambient temperature significantly in the fan's air stream using fine mist.
RLU-Remote Location Unit
No power? No water? No problem! Take it with you with Patterson's RLU-Remote Locatioin Unit.
|
|
| ... products without technical information |
| |
|
Aluminium honeycomb vent panels for EMC screening in a range of styles and sizes. Steel honeycomb vents are also available.
|
|
• HIGH LEVEL OF EMI/RFI SUPPRESSION COMBINED
TO PASSAGE OF AIR IN SHIELDED ENCLOSURES
• ALUMINIUM HONEYCOMB FOR HIGHEST AIRFLOW OF
ANY VENT MEDIUM (LOW STATIC PRESSURE DROP)
• ALUMINIUM WIRE SCREEN SANDWICHED BETWEEN
RIGID EXPANDED MESHES FOR DUST ARRESTING
(INLET COOLING PANELS)
• FURNISHED READY TO INSTALL WITH STANDARD
ALUMINIUM FRAME AND EMI SHIELDING GASKET
(fastener or thru-holes on the frame for fixing)
|
|
SILAIR is a panel for electromagnetic protection and screening for ventilation, heating ducts, lighting apertures…
The metal honeycomb cells of SILAIR use the waveguide principle which provides excellent attenuation but a minimal loss of pressure.
It allows air to circulate while ensuring the electrical screening of the aperture.
The outer frame enables the SILAIR panel to be fixed to its support. In certain cases a conductive gasket is recommended between the frame and its support.
|
|
|
Leader Tech introduces its high performance EMI shielded air vent panels to its product range. Air vent panels are manufactured using aluminum, steel or brass and are available in various plating finishes and mounting configurations allowing for installation in most applications.
|
|
|
|
|
|
StreamShield™ Commercial EMI Vents
- available with fire barrier coatings
Low cost StreamShield vent panels provide high levels of EMI shielding in applications such as computer network and wireless infrastructure cabinets. These vent panels feature aluminum honeycomb within rolled aluminum frames. The result is a lightweight, high airflow solution for enclosures requiring both cooling and high levels (50 dB at 10 GHz) of shielding. An optional intumescent coating provides fire barrier properties. On exposure to flame or heat at 300°F (149°C) the coating expands rapidly to fill the honeycomb cells and prevent flame passage. Standard panels feature 1/8 inch (3.2 mm) honeycomb cells, 1/4 inch (6.4 mm) thick. Complete frame/honeycomb assemblies are chromate conversion coated.
SLIMVENT™ Thin Profile EMI Vents
Chomerics' SLIMVENT™ air ventilation panels provide 90 dB attenuation at 1 MHz to 50 dB at 10 GHz. The panels are made from expanded aluminum or monel (nickel-copper) foil, secured in an extruded aluminum frame only 0.187 inch (4.75 mm) thick. This narrow profile is ideal for accommodating critical space limitations at air intake and exhaust ports. The frame has an integral wire mesh gasket for EMI shielding at the mounting interface. SLIMVENT air panels are fabricated to customer specifications.
CHO-ITO™ - ITO Coated Conductive Windows
Chomerics offers a range of EMI shielded windows with ITO conductive coatings for use in EMI/RFI shielding applications. The combination of high visible light transmission, near neutral color and low electrical resistance make an ideal EMI/RFI shield for electronic displays requiring moderate shielding effectiveness and high quality optical properties. CHO-ITO™ is a cost effective alternative to a mesh laminated window.
WIN-SHIELD™ Shielded Windows and
Contrast Enhancement Filters
Chomerics WIN-SHIELD windows are performance-tested glass and plastic assemblies for displays requiring EMI radiation or susceptibility shielding. They provide highly effective EMI shielding and exceptional optical clarity. Windows can be produced in glass, plastic, or combinations of both. Shielding is provided by wire mesh or by deposited conductive coatings. Chomerics' prototype-to-production service includes an extensive line of spectrally matched filters to meet stringent contrast enhancement performance requirements for both flat and curved configurations.
|
|
What differentiates ATI-Circular EMI Vents from other conventional panels is the shape.
Billets, rods, bar and plate stock are fabricated into rigid frames for structural support.
Core materials of honeycomb in assorted thickness and cell size, 3-layer screen, multi-layered screen, rigid grill and combinations may be selected for circular vent assemblies. EMI gaskets and environmental seals can be applied. Plating options enhance shielding effectiveness. Through hole locations are customized for easy surface mount installation with standard 8-32 rivnuts or .203 diameter holes. ATI Circular Vent Panels are designed for a precise fit of round openings on mounting walls or enclosures. Circular Vents are ideal in applications where a conventional rectangular vent may impede mounting space. Alco's special circular vent process can be fabricated in ATI 90° Cell, ATI-Dual Stack or ATI 3-Layer designs.
|
|
|
ATI Dual Stack Ventilation panel is a high level EMI shielded air filter with superior performance. Extruded aluminum profiles surround dual layers of ¼-inch honeycomb and welded in place. Both honeycomb layers are positioned 90 degrees to each other, optimizing shielding effectiveness and minimizing the polarization characteristics of straight aluminum honeycomb. Alco-Multi Gasket, a combination of neoprene sponge and monel mesh or Alco-Knit, is installed on the panel. Hole locations are customized for easy surface mount installation with standard 8-32 rivnuts or .203 diameter holes. Plating options enhance shielding effectiveness.
|
|
|
ATI's brass and steel honeycomb vent panels are recommended when structural integrity, H-Field shielding effectiveness, harsh environmental conditions and durability are primary concerns. Brass or steel extrusions are customized to surround brass or steel honeycomb and welded in place. Continuous flow soldering provides enhanced contact between the honeycomb and frame improving integrity. Alco Multi-Gasket, a combination of neoprene sponge and monel mesh fit, most applications although Alco-Knit or conductive gaskets are available. Standard through holes and spacing for surface mounting installation is customized. Vents without gasketing can be welded in place. Brass vents are typically finished with tin lead plating. Steel vents are commonly finished with tin plating. Other plating options available. Ideal for mobile military transportation, communication shelters or equipment where EMP or TEMPEST is required.
|
|
|
ATI-Thin Filter is the thinnest profile EMI shielded air filter. Extruded aluminum surrounds a singular thin piece of expanded monel or aluminum metal screen and welded in place. Alco-Knit or conductive gasket increase shielding effectiveness. Through hole locations are customized for easy surface mount installation. Plating options enhance shielding effectiveness. ATI- Thin Filters are frequently placed at intake and exhaust areas and are best utilized where narrow space limitations are a requirement.
|
|
| ... products without technical information |
| |
Metex EMI vent panels provide maximum attenuation with minimal air-flow resistance. Shielding effectiveness is greater than 80 dB at 10 MHz for chromate finished, single layer honeycomb, and is increased to 105 dB using our cross cell construction. By selecting the appropriate frame style, finish, and gasket type, performance can be custom tuned to meet your shielding requirements, and your budget constraints.
Vent panels are constructed of aluminum alloy honeycomb, with a perimeter frame of aluminum extrusion for mounting and gasket application. Various gasket options include wire mesh, spring finger, or conductive fabrics
|
|
|
|
see the results for the following category : 
