|
|
24 hour on-line diagnostic system
Energy saving and extention of aircon operating life
Maintenance management via service reports
Reliable service at short lead time
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
PGC's humidity generating systems are unique. The sources for humidity,
dehumidification, heating, cooling, and circulation are all packaged in
one self-contained unit. This unit is specifically designed to provide 500-
1000 CFM of conditioned air to rooms up to 2200 cubic feet. The conditioner is designed to produce very precise humidity and temperature
control.
Since this generating unit is selfcontained, it can be easily used to
condition existing spaces, small walkin rooms, and custom chambers. The
conditioner can be positioned on top or beside of existing chambers or rooms to circulate conditioned air through the contained space.
FEATURES:
- Precise temperature and humidity control
- High grade temperature compensated humidity sensor
- Stainless steel construction
- High-low or deviation alarms
- Compact Package
BENEFITS:
- Consistent and accurate results
- Confidence in the measured condition
- Durable
- Security and safety
- Easy to apply
|
|
|
ACUair® hygienic air-handling units incorporate state-of-the-art technology to provide refrigeration and meet filtration, pressurization, condensation control, and sanitization standards required by the food processing industry. Designed for rooftop installation, the units are custom engineered to produce the psychrometric conditions you specify. ACUair® products are the answer when clean conditioned air is needed for today`s hygienic food processing requirements. We offer a wide range of air distribution accessories including supply air diffusers, return air boxes or grills, and exhaust fans.
|
|
Product Features
* The DC line of Evaporators developed out of our commitment to supply products for specific customer applications.
* The DC line incorporates two vertical coils mounted parallel to each other with a common fan section between the coils.
* The two-coil design allows for maximum capacity with energy efficient propeller fans in a low profile design.
* They can be specified as either two-directional horizontal air flow or single direction vertical down air flow.
* Interconnecting piping is provided to simplify system design and minimize field connections for the installing contractor
|
|
| ... products without technical information |
| |
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
|
|
|
|
PS-900 Soldering System
The power to solder demanding loads, the control to assure consistent results.
The OKi PS-900 Soldering System, powered by SmartHeat® Technology, is part of a new generation of cost-effective soldering systems from OK International. The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. The PS-900 provides operators the repeatability to produce high quality solder connections with exceptional speed.
More Applications
The PS-900 increases productivity by performing a wide range of applications. It is suited for lead-free soldering processes, multilayer boards and thermally demanding components. What's more, SmartHeat technology enables the PS-900 to solder at lower temperatures, even for such demanding applications as lead-free soldering processes. This means operators are more productive and materials are safe from damaging temperatures.
Low Operating Costs
The PS-900 is designed for simplicity and low maintenance. With SmartHeat Technology at its core, it requires no calibration. Moreover, it uses high quality tips that assure low ongoing operating costs. Its low cost makes it the perfect choice for small or large production environments, which need exceptional performance, while being mindful of operating budgets.
|
|
Eye-Rim forming machine 2D/3D
Aquisition of the model through a feeler pin. Better accuracy of the finished product thanks to the improvement of the wire properties by using a set of pressure rollers in the horizontal and vertical axes. Easy and quick machine setup when changing wire dimensions. Double check to verify there is no wire slipping to prevent any length difference. Highly precise and fast hydraulic cutting system with the possibility to choose a straight or a "V" cutting. Built-in PC and 14' "CRT monitor" equipped with a continuity group to prevent any data loss in case of black out. Easy realisation of new rim models, with curvature from 4 to 9. Easy correction of both eye shape and curvature where necessary. User-friendly "help on line" software.
|
|
|
|
|
|
The Master Controller V2 is a computerized industrial control unit housed in a robust stainless steel container, designed for automatic and semi-automatic management of soldering cycles carried out using CEIA Power Cube Induction Generators.
The Controller comes with a set of four predefined programs. All operating parameters for each phase of the heating cycle can be programmed within a wide range of values. This allows maximum flexibility in setting the heating and cooling times, the power supplied by the induction generators, the operating temperatures for the piece being worked on and the quantity and feed speed of the solder.
Together with the optical temperature sensors (SH series) and the solder dispensers (WF series), the CEIA Master Controller V2 allows the creation of efficient induction soldering systems and achievement of completely repeatable, economical heating processes and finished products.
An RS-232 serial interface allows connection to a PLC, PC or external logic for remote loading and running of operating programs.
The photocoupler-type static inputs have programmable P/N logic, and together with the static outputs are subject to a programmable auxiliary voltage of 12/24 V.
|
|
| ... products without technical information |
| |
GE Motor Control Centers Serve Many Applications
Our low voltage and medium voltage motor control centers are suitable for applications such as pulp and paper, mining and metals, utility, chemical, oil and gas, mass-production manufacturing, and water & waste water. Since 1940, GE motor control centers have been designed and manufactured with demanding applications like this in mind. Our MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards.
|
|
|
|
|
|
The GE Limitamp motor control center provides an economical means of centralizing motor starters and related control equipment. It permits motor control starters, feeders, isolator switches, distribution transformers, interlocking relays, programmable control, metering and other miscellaneous devices to be obtained in a single floor-mounted structural assembly fed from a common enclosed main bus.
Limitamp motor control centers are constructed of standardized heavy gauge vertical sections housing vertical and horizontal buses and compartmented starters. Sections are bolted together to form a single line-up assembly. The entire center may be powered by incoming line connection at a single point.
Typical applications are in paper, steel, cement, rubber, mining, petroleum, chemical, and utility-type industries. Limitamp control is also used in water and sewage plants and public buildings for air conditioning, pumps and compressors.
Features and Benefits
* Visible blade disconnect switch
* Proven, high reliability vacuum contactors (2 million operations)
* Quick-make / quick-break disconnect switch
* Modular, flexible enclosure construction
* Extensive protective relays from GE Multilin®
* Epoxy insulated bus available
* Drawout and stationary contactors
* 1 high and 2 high arrangements
* UL / cUL available on most units
* Large isolated low voltage compartment
* No rear access required
* Matching line-up with all existing Limitamp installed equipment
* Construction Options
- Main bus: 1200A, 2000A, 3600A
- System voltages: 2400V, 3300V, 3600V, 4160V, 4800V, 6600V, 7200V
- Contactor sizes: 400A, 800A
- Enclosure types: NEMA 1, 1A, 2, 3R, 12
- Bus bracing: 50 KA symmetrical
|
|
You can save installation and integration time, reduce downtime, increase efficiency and improve process control with our intelligent motor controls from Rockwell Automation. CENTERLINE MCCs feature the following motor controls:
Across-the-line starters with E3 solid-stateoverload relays
SMC and SMC-Flex soft starters
PowerFlex variable frequency AC Drives
What sets these intelligent motor controls apart from traditional motor controls is their ability to capture important performance information about your motors and deliver this information via built-in networking to where it is most valuable.
|
|
To compete in a global economy, you need all the parts of your operation working together at maximum efficiency. This includes your motor controls. If you control motors with decades-old technology, you are missing a significant opportunity to gain a competitive edge in your market. Rockwell Automation NEMA Motor Control Centers (MCC) feature intelligent motor controls in a versatile enclosure that help you compete and win in a world economy and the safety features also help you meet your safety goals.
You can save installation and integration time, reduce downtime, increase efficiency and improve process control with our intelligent motor controls from Rockwell Automation. CENTERLINE MCCs feature the following motor controls:
Across-the-line starters with E3 solid-stateoverload relays
SMC and SMC-Flex soft starters
PowerFlex variable frequency AC Drives
|
|
|
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads.
|
|
|
|
|
|
AC Magnetic Motor Controls:
AC controllers for use with new or existing wound rotor or squirrel cage motor drives featuring contactor type secondary control or solid state four quadrant speed regulation. They are ideal for motor primary or secondary controls, eddy current brake hoist, counter torque hoists and life bridge controllers. Also available are adjustable frequency drives. Hubbell AC Motor controllers are designed to meet your specifications and constructed to fit you space.
DC Magnetic Motor Controls:
The most complete line of standard and custom controllers. All controllers are front wired, from connected and front accessible in NEMA rated contactor sizes 0 through 8 for EOT crane control, dynamic lowering and reverse-plugging installations. Also available are mill auxiliary controllers, special circuits to meet custom installation requirements and special construction to meet customer specifications.
AC/DC Solid State Motor Controls:
Hubbell's S²MC Solid State Stepless Motor Controls are ideal for controlling overhauling loads such as lift bridges, bridge cranes, bucket/grapple cranes, portal/whirly cranes, turbine cranes, tramways, and coke oven drives.
Utilizing AC induction motors (squirrel cage and wound rotor) the line of S²MC controllers are available in both primary thyristor (4920 series) and secondary thyristor (4940 series) through 500 hp, or more, and capable of operating on 208/230/380/460/575, 3 phase VAC, 50/60 Hz. The line of S²MC controls have been successfully applied on hundreds of applications for over 15 years.
|
|
|
|
|
|
SINAMICS GL150
The rugged converter for synchronous motors up to 75 MW
The LCI-converter (load commutated inverter) SINAMICS GL150 extends the SINAMICS drive family to highest power ratings.
SINAMICS GL150 is designed as a drive converter for single-motor applications with variable and constant torque characteristic. The converter is available in air- and water-cooled design and achieves power ratings up to 74 MW (water-cooled design). Higher ratings are available on request.
SINAMICS GL150 is used for speed-variable operation as well as for start-up operation of large synchronous motors and generators. The typical speed range extends up to approx. 6000 rpm. When used as start-up converter the speed-range is limited by the synchronous line frequency. Within this range a speed control range of 1:10 or 1:100 can be realized. Due to the topology regenerative (4Q) operation is possible without additional measures. The drive converters SINAMICS GL150 drive converters offer an economical drive solution for highest power ratings of 74 MW and beyond, which can be adapted to specific customer needs with a wide range of optionally available components and accessories.
|
|
Spectra Series 8000 Line
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads. In many facilities today, these motor loads often are precision HVAC systems responsible for cooling sensitive electronic equipment - servers, routers, switches, pc's, etc. Any power outage or fault event could severely damage this equipment and ultimately bring all operations to a halt - resulting in huge financial losses.
Since 1940, GE Motor control centers have been designed and manufactured with demanding applications like this in mind. Built using Six Sigma quality guidelines, GE MCCs offer an enormous amount of application flexibility while adhering to the most stringent industry standards.
|
|
... see all the products in the category
AC drives
|
Universal water temperature controllers for the demanding injection moulder
- precise microprocessor control
- simultaneous display of set and actual values
- simple one button operation
- optional flow monitoring
- optional connection for external thermocouple Fe-CuNi or Pt 100
- optional interfaces at front panel
- splash proof electrics
- ready to connect with 3 m long mains cable and CEE socket
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
