|
|
The Altherma heat pump boiler
satisfies your heating requirements but it can also
supply your domestic hot water. For hot summer days,
as an option, Altherma can also give you cooling. It is an
all-in-one, all year round heating and cooling solution.
A heat pump boiler works much more efficiently
and saves more energy than a traditional heating
system based on fossil fuels. With Altherma, 1 kW
of electricity consumption generates 3kW to 5 kW
of free heat. That’s an investment that pays.
For more information on Altherma, please go to the link and you will be connected to the official Altherma site.
|
|
Reversible medium capacity air-to-water INVERTER heat pump for heating and cooling in individual or collective housing, tertiary, hotel or healthcare sectors.
May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes), air handling units or low-temperature radiators.
Designed as standard for outdoor installation in an urban environment without any special weather protection.
2 models available
- IVDC: Reversible heating or cooling with hydraulic system, without tank
Heating capacity from 41 to 53 kW
Cooling capacity from 36 to 47 kW
|
|
Aqualis 2
Air-source reversible heat pump for heating and cooling of individual homes and small businesses. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators. May be installed in new or renovated housing and buildings to replace or be used in conjuction with a gas or oil-fired boiler. Designed as standard for outdoor installation without any special weather protection.
Eight models available
Heating capacity: 6 to 19 kW
Cooling capacity: 5 to 18 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- Scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Low-speed propeller fan,
- Hydraulic module with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-410A refrigerant.
|
|
Medium capacity air-to-water heat pump for "high temperature" heating only. Serves as a boiler backup in large homes and multi-residential buildings as well as businesses, hotels and healthcare facilities.
Particularly suited to renovations, the unit is designed to be connected to an optional mixing tank with multiple connections that supplies water to high-temperature radiators.
This packaged unit is designed to be installed outdoors in urban environments. No special precautions are required to protect it from adverse weather other than frost (in areas where frost is a possibility).
Available in four sizes:
TDC 80Z to 150Z: High temperature HEATING only; hydraulic system without buffer tank
Heating capacity: 25 to 48 kW
Outdoor use (-20°C to +45°C)
|
|
|
|
|
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional.
|
|
Aquasnap Air Cooled Chiller Range
"B" Series*
Features
12 sizes from 39 to 250kW
Easy installation : Aquasnap includes an integrated hydronic module and a standard disconnect switch
Exceptional quiet operation: all units have scroll compressors and low noise shrouded Flying Bird II fans (2 speed motor)
Chlorine free R407c green refrigerant
User friendly Prodialog Plus control with direct display machine main parameters : temperatures, pressures and CCN Clock board functionalities as standard*
Easy integration into any building thanks to reduces footprint and low profile
Standard Protection Grills from January 1st, 2000
|
|
Construction:
- Pump casing with suction and delivery connections with the same diameter and on the same axis(in-line).
- With fittings
Construction Materials:
- Pump body: Cast iron
- Impeller: PES composite
- Shaft: Ceramic
- Bearings: Ceramic
Applications:
- For clean liquids without abrasives which are non-aggressive for the pump materials.
- Civil and industrial heating systems.
- Cooling and air-conditioning systems.
Operating conditions:
- Liquid temperature from 2°C to +110°C
- Ambient temperature up to 40°C
- Max.permissible working pressure: 10bar
Motor:
- 2-pole induction moter, single-phase 230V,50Hz
- Three adjustable speeds
- Insulation class H
- Protection IP44
|
|
| ... products without technical information |
| |
|
Airmix® 20.50 Pump - Stainless Steel: Universal AIRMIX® pump, can be used with most coating materials, including high solids and water-based products.
|
|
|
AIRMIX® 10.14 - "Start Pump": For any industrial application requiring low viscosity products
|
|
|
Flowmax® 40.25F Pump - Stainless Steel: New generation Flowmax® pump for low volume applications
|
|
|
The range of Airless & Air Assisted system ARO has been designed to provide sprayers with a very robust industrial assembly, able to apply a wide range of industrial coatings whilst providing the very best quality of sprayed finish. The packages are available in a variety of mounting options including; Tripod, Cart, Wall and 25 Litre Pail. The Pumps are complete with a 5 Year Warranty
|
|
The standard features of Binks MX4/12 and MX4/32 Air Assisted Airless & Airless pumps position them as the premier choice for high speed surge free paint delivery.
Binks MX pumps are a completely new design in pump technology utilising patented magnetic detents to dramatically enhance smooth pump operation and change over with no pulse to provide the best “surge free” paint delivery for the perfect finish. These MX pumps operate at 12:1 and 32:1 ratio’s delivering 4 litres per minute output (max) with self adjusting spring loaded packings to extend the pump working life cycle and reduce the need for costly maintenance and downtime. The fluid sections and all wetted parts are constructed from the highest quality stainless steel for best fluid compatibility whilst providing a long and durable working life. MX pumps are fitted with an operator friendly control panel and include a quality easy to clean fluid filter as standard for reduced tip blockages.
|
|
|
The BINKS H.P. Range of Airless & Air Assisted Airless Spray outfits have been designed to provide sprayers with a very competitively priced, robust industrial assembly, able to apply a wide range of industrial coatings whilst providing the very best quality of sprayed finish.
|
|
The DVP is a membrane pneumatic pump high specifications of a 1:1 report/ratio developed for the direct power supply of the paint guns and
liquid product.
This concept guarantees a constant direct food and virtually without pulsations of the guns by avoiding the cost and the complications of a regulator of fluid or a clearing house.
Range DVP includes pumps alone, assembled pumps and offers
complete "ready with employment" matched with guns of high fame, DeVilbiss Advance or FLG5. Pump DVP is ideal for a use with ALL the TYPES of technologies of gun, conventional, Trans-Tech©, HVLP,
LVLP or electrostatics.
|
|
High pressure and high fluid flow per cycle increases your production and reduces rod and cylinder wear
Severe Duty rod and cylinder handles the most abrasive coatings
Simple design makes fluid pump repairs easy
Designed for applications requiring large tip sizes, long hoses and high flow rates
Exclusive air valve design minimizes ice-related downtime
|
|
Líne de Pintura - Pumps Airless Painting
Ace painting pumps airless gives to Hasco são highly confiáveis, of high performance and com baixo custo of manutenção. Ace pumps foram projetadas to pump including inks com high teor of solids, I tied 100% free of reliable, sob severe ace mais condições.
Aplicações
- Naval Naval industry and construção
- Fabricação and manutenção of trens
- Offshore Industry
- Fabricação of containers
- Estrutural Aço and proteção against corrosão
- Revestimentos of tanks and tubulações
- Revestimento of proteção against fogo
- Industry of paper and celulose
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
