|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
Floor Standing Type
This space-saving design with a slim shape and smart vent line offers the least obstruction to the surrounding area.
* The unit can be easily installed on the floor along the wall or under the window. Maintenance is simple.
* This type can be hung on the wall for easier cleaning.
|
|
RECUBOX is a cased heat recovery exchanger for use in transferring air and the recovery of heat from the air taken from the interior to the fresh air transferred into the interior without the two being mixed. It is intended for operation in a basic environment for the transfer of air not containing rough dust, grease, chemical vapours and other pollutants. It is an easy and effective solution leading to a higher ventilation efficiency and lower electrical energy consumption on current air conditioning systems. RECUBOX is equipped with a highly efficient plate counterflow heat recovery exchanger made from Al with an efficiency of 92%.
SPECIFICATION
- under the ceiling installation into air-conditioning duct systems
- flow rate range: 300, 500, 700, 1000, 1500 and 2000 m3/h
- effeciency up to 92 %
- pocket filter design (G4) and without filters
- sandwich cover construction casing 32mm
|
|
|
|
|
|
This is a heat recovery unit, which ensures air exchange in the building, which is essential for healthy breathing. The air is sucked in from outside and heat is added from the exhaust (heated) air without this two being mixed. This saves up to 90% of the heat. Furthermore, the fresh air from outside is filtered and directed through ducting to individual rooms. In the opposite direction, the unit sucks in air from the room, takes off its heat and exhausts to it outside.
The AVENTIS heat recovery unit, with a view to its air volume output, compact dimensions and automatic regulation, is especially intended for the ventilation of smaller shops, cafes, restaurants, administrative areas, sports grounds and others.
SPECIFICATION
- Air output up to 2 400 m3/h
- Recuperation efficiency up to 90%
- Low energy demand thanks to EC motors
- Standard delivery includes sophisticated automatic regulation
- Standard delivery includes multilingual remote control (EN, FR, RU, DE)
- User friendly operation
- Quiet and economical running = safes your money
- Long life span
- Possibility to control extended electric or water heater (PID)
- Unit height 360 mm
|
|
The ISIS Recover recuperation unit is designed for the exchange of air in households necessary for healthy breathing. It draws outside air through ducts and transfers heat to it from the exhaust air (heated in the indoor environment), without mixing the two types of air. In this way up to 60% of heat is saved. The fresh air is furthermore filtered and transferred through ducts into individual rooms. The unit draws air in the reverse direction from the room, removes heat and blows it into the outside environment.
The ISIS Recover recuperation unit is, thanks to its air output, compact dimensions and comfortable controls designed for ventilating family houses and apartments.
Specification:
air output 300 to 500 m3/h
recuperation efficiency up to 60%
low power consumption = ENERGY SAVINGS
width of unit 600 mm
equipped with an integrated heater
comes with a mechanical by pass as standard
comfortable controls using a remote control
long operational lifetime
|
|
Ventilation unit to extract hot air from open fire place in a one family house and to distribute it in other rooms.
Range Ref. Description Detail Quot.
Groupe Air Chaud Unidébit Extraction of hot air from open fire place
Groupe Air Chaud Filtre Hot air unit with filter and drived by bimetal
|
|
Always a clean solution
Air Management Systems - competence for the entire air section
Even during the early years of the company, MAHLE recognized that effective cleaning of combustion air and lubricant is an indispensable element in improving the service life of engines and engine components. In line with this understanding, work began in 1926 on the development and production of air and oil filters. Only then was it possible to commence the reduced-wear use in series production of lightweight pistons developed by MAHLE. After having to concentrate on the core business with pistons during the war, re-entry was achieved by a participation in Knecht Filterwerke GmbH. Strong organic growth was accelerated by the acquisition of the Japanese Tennex Corporation, an important component of further expansion. This opened up markets outside Europe, with the result that today MAHLE is the number one worldwide supplier of filter products to the automobile industry.
|
|
ICHEX-Spot Cooler
Patterson's Portable Evaporative Cooler has a long air throw and can cool the ambient temperature up to 20 degrees Fahrenheit.
PBF/PSF-Portable Fogging Fan
Cool ambient temperature significantly in the fan's air stream using fine mist.
RLU-Remote Location Unit
No power? No water? No problem! Take it with you with Patterson's RLU-Remote Locatioin Unit.
|
|
| ... products without technical information |
| |
The fan trays satisfy the specific requirements of IT sector for the cooling of electronic components inside 19inch enclosures.
This ventilation unit, equipped with three or six 120x38mm ball bearing compact fans, is integrated into the rack structure, ensuring a continuous air circulation and preventing the formation of hot spots.
|
|
19" Ventilation drawer (1U.) with 3 fans and luminous switch
Colour RAL 7035 grey
95298535
19" Ventilation drawer 3 fans with luminous switch and thermostat (2U)
Colour RAL 7035 grey
95298536
19" ventilation unit 6 fans with luminous switch (1U)
Colour RAL 7035 grey
95298545
|
|
-High air output
-Long service life
-Ball bearing fans
-Ready for connection
-Optical function indicator
Compact high performance fan tray for enforced circulation of air in switch and server enclosures and for concerted cooling of 19" component groups.
Natural convection is improved and the formation of localised hot pockets is avoided.
Also available with integrated thermostat (see photo).
Approvals: UL File Nr. E 234324
|
|
Special design fans and plug-in fan modules
# 19" plug-in fan module including
attached external temperature controller.
# 19" plug-in fan module with selfcontrolled
ventilators and fan speed monitoring and status and error signaling
|
|
|
Our fan trays provide forced-air cooling in a 1U x 19” aperture. With minimal rack space and replaceable fans, they are a versatile solution to cooling card cages and racks. The range is extensive, offering 3,6 or 9 fan variants with auto ranging AC or DC operating voltage, temperature monitoring, filtration and speed control. Accessories include filters, thermostats, ducting trays and slides.
|
|
| ... products without technical information |
| |
GE ASD Inverter Duty:
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors, and other inverter duty appliccations.
Features and Benefits:
- Standard Features
- Infinity:1 CT Speed Range CH to 90 Hz
- IGBT Compatible
- N/C thermostat
- Opp DE mounting face & stub shaft for tach mounting
- C-Face foot mount thru 30 HP
- Cast Iron Frame & Brackets
- Class F Insulation
- 440 Fr have insulated ODE brg/Grd brush
|
|
Series: K2.. 90 to 355
Output range: 0.25 kW to 500 kW
Class: 3,000; 1,500; 1,000; 750 rpm, lower speeds and pole-changeable versions on request
Features: Energy-efficient and environment-friendly, suitable for frequency converter supply, designed to DIN EN 60034 (IEC 72) and pr EN 12101-3, mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, versions for jet fans without shaft-mounted fan or pad-mounted, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H and higher possible, various modifications available
|
|
|
|
|
|
Applications
These smoke removal systems are applied in a broad range of applications including large buildings, shopping malls, factories, warehouses, enclosed parking lots, tunnels, among others. In other words, they are used where a large concentration of people in commercial and industrial facilities is present.
Standard Features
Output: 0.12 up to 355kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Ventilation Motor, TEAO
Cast iron frames (80 up to 355M/L)
Pad Mounted (frames 80 up to 250S/M)
Mounting: B3L (frame 280S/M and above)
Degree of Protection: IP55
Flying leads 1 meter long
Squirrel cage rotor/Aluminium die cast
Stainless steel nameplate AISI 316
Class "F" insulation
Continuous duty - S1 (S2 - 200°C/2h once only)
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors (1 per phase) fitted in frame 160M and above
Paint color: Silver
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Terminal Box
Self Ventilated, TEFC
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Roller bearings for frame 160M and above
|
|
| ... products without technical information |
| |
CPU Cooling Fans SAN ACE MC
Liquid Cooling System SAN ACE MC Liquid
SAN ACE MC Series is a low-noise, low-vibration cooling fan with superior head dissipation for efficient PC CPUs .
Sanyo Denki offers a complete product lineup of CPU coolers for Intel(R) Pentium(R) Processors. Please consult us for the latest models.
The SAN ACE MC Liquid Series is a high-performance liquid cooling system for CPUs with high clock speeds and extreme heat generation.
The device consists of a radiator, a reserve tank, a pump and a cooling fan.
|
|
Tyco Electronics Thermal Solutions offers a complete line of heat sinks designed to meet Intel, AMD, and custom system architecture. Our active/passive heat sink designs encompass folded fin technology, extrusions, cold forged, and custom machined designs. In addition, we can embed heat pipes into custom applications.
We also offer our patented Chip Cooler design for lower wattage applications. This design incorporates a removable snap clip integrating a threaded radial or pin fin heat sink. The Chip Cooler product is fully re-enterable and includes the thermal interface material. We offer product "bundling" to include socket and thermal solutions as well as attachment hardware for all solutions.
|
|
|
|
see the results for the following category : 
