|
|
| ... products without technical information |
| |
No matter what the application, Draeger's System Centers will design a monitoring system for your specific needs.
Whether it is a single wall mount unit for only one or a few points, a 19" rack mounted modular controller, or a full blown SCADA system with cabinetts to house the electronics and wiring, our experienced engineers will help to design the system that fits. Even PC monitoring consoles with event log displays and zoom-in plant layouts are available from Draeger Safety.
|
|
Acting as the nerve center of a modular gas detection network, the Vulcain 301C provides continuous monitoring of up to 96 inputs/outputs, on 3 distinct channels, at distances of up to 2000 feet.
Once installed, this highly customizable and powerful tool provides around the clock protection identifying hazards and triggering appropriate reactive measures such as ventilation activation.
|
|
|
The Waukesha Engine System Manager (ESM) is a total engine management system designed to optimize engine performance and maximize uptime. The ESM integrates spark timing control, speed governing, detonation detection, start-stop control, diagnostic tools, fault logging and engine safeties.
|
|
|
Our FX30LWD is a very versatile electronic ignition Full Sequence Controller for all types of OEM gas appliances. It is factory configurable to suit individual OEM and offers a number of unique features such as dual fan speed control. It is a drop-in replacement for the Gemini 960e combi boiler
|
|
| ... products without technical information |
| |
The MX range is a compact and affordable steam boiler ideal for small to medium sized users of process steam.
Each boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory, thereby ensuring quality control of the very highest standard. All fittings are mounted in the factory to make installation on site as quick and easy as possible.
The boiler can incorporate any make of burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
The MX boiler has a thermal efficiency in excess of 89% (based on NCV) .
External surfaces are well insulated and finished in tough, Aluzinc cladding.
The front door is lined with the latest ceramic fibre technology offering significantly less heat loss than traditional refractory materials.
The MX range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A huge range of accessories are available to further enhance the boiler; contact us for more details.
Manufactured to BS2790 Class 1 with outputs to 3MW (5000 kg/hr) and operating pressures to 17 bar(g)
|
|
The OPRA Generator Set is the best solution in the 2MW electrical power range to produce steam:
-High Turbine exhaust temperatures
-High exhaust flow
-High Overall efficiency
|
|
| ... products without technical information |
| |
|
Our systems for gas permeability measurement for plastic and rubber samples have simplicity, excellent selectivity, high sensitivity and wide dynamic range. The measurable permeating components include water vapor, hydrogen-sulfide, methane, ethane, carbon-dioxide, BTEX (Benzene, Toluene, Ethyl Benzene and Xylene), ammonia etc. There are two basic forms of our systems; the first one, which is based on photoacoustic gas detection, is optimal for measurements at normal pressure and temperatures up to 120 ° C. The second one, which is based on photothermal beam deflection method, can be used also at extreme pressures (up to 1000 bar) and also at high temperatures. An outstanding feature of our system is that due to the very high dynamic range of the measuring method, it is possible to fit numerically the early part of the permeation curve, which results in a considerable reduction of the measurement time
|
|
|
The FlowSorb III is an entry-level single-point and multipoint BET surface area instrument. The FlowSorb measures surface area using the flowing gas method, which involves the continuous flow of an adsorptive and inert gas mixture over the sample at atmospheric pressure. It is ruggedly constructed and ideal for demanding analytical environments.
|
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process Control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models.
|
|
| ... products without technical information |
| |
Features:
Single-pole SPD
Iimp = 100kA
Imax = 160kA
High Energy GDT
Compact Housing
Product summary:
The PROTUBE BS is an over voltage surge protective device and has been developed to protect against partial direct and indirect lightning discharges and is intended to provide protection in zones 0A - 1 as per IEC 62305.It consists of an encapsulated air gap device (GDT), and is used as a galvanic separation between the N-PE conductors in a 1+1 or 3 1 power distribution system (TT networks).
|
|
|
Fided Gas Tube models are designed for maximum durability in extreme conditions . Typically rated at an astounding IP68 rating, these units are ready for any environment, and more critically - will last the test of time
|
|
|
Fixed Gas Tube models are designed for maximum durability in extreme conditions. Typically rated at an astounding IP68 rating these units are ready for any environment, and more critically-will last the test of time.
|
|
|
Replaceable Gast Tube models are designed for maximum durability in extreme conditions. Typically rated at an astounding IP68 rating these units are ready for any environment, and more critically - will last the test of time.
|
|
|
MODEL WORKING DIMENSIONS HANGER LOAD HANGERS O mm H mm kg N TURBORAIL 1 800 1100 500 14 16 TURBORAIL 1 600 1100 500 19 TURBORAIL 2 1000 1500 700 16 18 HANGER MODELS WITH AUTOMATIC CONTINUOUS OR INDEXING WORKLOAD ADVANCEMENT
|
|
For gas and oxygen cylinders blasting equipment is used to blastclean the insides during production and remove corrosion such as rust and scale during rebuilding.
Cylinders are positioned in the blasting stations either manually or by means of lifting gears and roller conveyors or by robot (see illustration above).
Cylinders are processed vertically to ensure that abrasive gravitates downwards.
|
|
Gas Cylinder Blasters
GC 110 and 220
GC 111 and GC 112
GC 113
GC 500 and GC 1000
GC 48T and GC 48-2
Gas Cylinder Washers
GC 30R
GC 40R
|
|
| ... products without technical information |
| |
|
|