|
|
|
|
|
|
Aquaciat Power
High-capacity air-cooled chiller for cooling of commercial, industrial or healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
- R-410A refrigerant,
- Compact unit takes up little ground space,
- Fully encased in a housing constructed of coated metal panels that can be detached for outdoor installation,
- Two independent refrigerant circuits,
- Four to six new-generation, high-efficiency scroll compressors,
- Water-cooled brazed-plate heat exchanger,
- Six to eight propeller fans,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Total or partial energy recovery.
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard.
Four models available
Cooling capacity: 330 to 500 kW
- LD: Without hydraulic system,
- LDC: With hydraulic system, without tank,
- LDH: With complete hydraulic system and tank.
|
|
|
|
|
|
The new Piovan Digitemp Thermorefrigerators heat and cool the process circuit of injection and blow moulding machines. They integrate both temperature control and free-cooling functions, and provide water to every single circuit at specific temperature (from -5°C to +90°C for every single circuit), pressure and water flow.
Advantages:
Significant reduction of energy consumption
The combination of compressors with digital technology and the electronic expansion valve - installed in all the Digitemp models in their standard version - ensures the greatest energy efficiency. Moreover, the exclusive Piovan solution which does not require an internal re- circulating pump further increases energy savings.
Reduced running costs
Thanks to the possibility to use the free-cooling system included in the standard unit, they can provide water coming from the dry cooler or the evaporation tower.
Ultra-compact design
With a floor dimension of only 0.4 m2 and a height of 108 cm, these models are the most compact units present on the market at the moment.
Realibility and long life
The possibility of power modulation from 10 to 100% allows the compressor to function continuously, thus eliminating the risk of breakdowns and ensuring long duration of the motor.
Maximum flexibility
The Digitemp models represent the ideal solution whenever it is necessary to manage the demands of different temperatures of every single processing machine, with no waste. Available in the single and dual circuit versions, they can be equipped with medium or high pressure pumps, which guarantee adequate water flow and thermal exchanges, in any application.
|
|
CASTALIA, the condensing absorption chiller with power modulation, (Systema S.p.A. patent-pending), for the production of cooling and hot water, can be used as a heating system in winter and as a cooling system in summer.
The installation of this brand-new product guarantees important energy savings in comparison with the traditional separated systems such as boiler and electric chiller.
CASTALIA is composed by a highly efficient premixed gas burner with modulation combined with an exchanger: the NOX emissions are very low.
There is the possibility to choose the equipment between 8 different models, with a heating capacity from 12.9 kW to 139.2 kW and a thermic performance of 107.4%.
The available cooling capacity range is 12.5 kW - 115 kW with a cooling performance of 103% that can reach 130% if we consider the energy recovery for the production of sanitary hot water.
|
|
|
|
|
|
We are glad to inform you that Systema S.p.A. has introduced in its range of products the "RENEWABLE ENERGY PACKAGE".
This complete product is an Absorption refrigerator-thermic System created for the external installation.
Its power supplyies can be:
- gas;
- hot water produced by solar concentrators and collectors;
- fume-steam heat recovery systems;
- fumes and hot water of a cogenerator.
Thanks to a cogenerator, Renewable Energy Package, becomes a CCHP system (combined cooling, heating and power) for the production of hot water, cooling water and electricity.
This preassembled OR ENBLOC package is composed by an Absoprtion Chiller, a cooling tower, a cool and hot water storage, pumps, filters, mixing valves and a control panel for the management of the complete system.
Systema S.p.A. designs, produces and commissions the Renewable Energy Package in its industrial plants.
One of the most important advantages is that our company offers a complete high-tecnology system to be installed outside, according to the particular requirements of the customer.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
Heating ovens and drying ovens for
laboratory and production department, series VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
Heating ovens and drying ovens for solvent-based
materials as per EN 1539, series VTL
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
Range VTU
The drying ovens with pulsated air are available in 7 volumes with rich equipment and have a broad choice of accessories.
Trays, grids, plates.
Carriage of loading.
Filter fresh air.
Carry to port-hole.
Etc...
Useful volume: 200 - 8000 liters
Range of temperature: 250°C, 300°C and 350°C
Guidance of the air: horizontal
|
|
|
|
|
|
AUREL A206 Dryer/Curing Oven system
Description
The AUREL A206 dryer system is special designed for predrying of pastes in thick film technology.
Applications
• IR Drying of Thick Film pastes
• IR Curing of adhesives and polimeric pastes
Prior to being submitted to be firing process, substrates with screened-on inks/pastes must be predryed to evaporate the solvents.
Infrared heat is the only heating method available by which thick film pastes can be properly dryed with optimum results.
This is because infrared heat waves penetrate the material and dry the inside of the material first, then dry outwardly to the surface.
Convenction heat causes the outside of the paste to dry first forming a film through which it is difficult for the solvent within to pass.
The solvents actually become partially trapped and as they eventally are released cause cracks in the surface of the material.
Consequently the surface is irregular, resulting in reduced conductivity or inconsistent resistivity.
The new model A206 predrying oven was designed to prevent the problems outlined.
It's design criteria are based on extensive experience in thick film technology, to provide the user with a machine that assures optimum results.
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
ANCILLARY EQUIPMENT FOR EXTRUSION LINES
- PREHEATING OVEN -
Type FR1
Preheating oven; complete with temperature control
- total installed power kw 8 - total lenght mm 1000.
|
|
Heating controller Elfatherm E25
By its use of modern digital technology the heating controller E25 series offers a wide range of functions combined with simple handling with its time-tested analogue control philosophy.
The following controller models are available:
- E25.0100 Boiler and hot-water controller
- E25.0200 Dual stage boiler and hot-water controller
- E25.0300 Boiler, mixer and hot-water controller
- E25.0400 Dual stage boiler, mixer and hot-water controller
- E25.1000 Mixer controller
Heating controller Elfatherm ME 50, ME 80
Elfatherm ME is used in heating systems with mix controllers.
The compact controller Elfatherm ME consists of a weather-dependent 3-point controller mounted on a servo-motor. It is ideal for retrofitting to existing systems.
ME 50 is particularly suitable for miniature mixers, e.g. the Minimix.
ME 80 is fitted with a universal mounting plate. This makes it possible to install it on all conventional mixers.
|
|
The PHPC is a computerized industrial control unit housed in a robust stainless steel container, designed for automatic and semi-automatic management of soldering cycles carried out using CEIA Power Cube Induction Generators.
The Controller, which comes with a basic set of eleven predefi ned programs, allows an unlimited number of personalized heating and soldering cycles to be entered according to the user's requirements.
The PHPC's programming language has been optimized for implementation of heating cycles, and is therefore characterized by maximum conciseness, reading clarity and ease of modification.
The selection of the parameters and the choice of commands are made via menu windows, using either a mouse or selection keys on the front panel of the controller.
|
|
|
The New INHECO Multi TEC Control can handle up to 6 different CPACs or shakers simultaneously and independently, providing maximum flexibility for larger applications.
|
|
|
|
|
|
INHECO Single TEC Control (STC)
The INHECO Single TEC Control (STC) is a compact plug & play temperature and RPM controller for the use with INHECO’s CPAC and temperature controlled shaking devices. The controller box includes a temperature controller with high accuracy, a device connector slot, a touch display, a wide-range power supply for worldwide use, an USB interface, a rugged housing and a RPM controller for shaking operations.The STC can be individually equipped with a controller slot for the CPAC devices or with a controller slot for temperatur controlled shakers. The device slot can be exchanged easily, giving maximum flexibility. The STC can be either operated manually using the touch screen, or through an USB interface. The soft- and firmware of the controller allows programming of complex temperature and shaking sequences.
Application Areas
The STC is mostly used together with the principal INHECO heating/cooling/shaking units in/on robotic platforms and systems in Lab Automation. The purpose is to form temperature controlled areas, which offer direct and easy access by robotic grippers and pipetting heads. The STC is designed for the use in fundamental research, drug discovery, clinical research and diagnostics in the Life Science market. The STC is also prepared for use in customer IVD applications.
The STC is used with the following INHECO heating/cooling units:
- CPAC Microplate
- CPAC Ultraflat
- Variomag Teleshake
- Variomag Thermoshake
|
|
INHECO Single TEC Control STC
INHECO has launched the STC, a compact high precision controller for managing single INHECO CPAC or shaker devices. The STC can be equipped optionally with slots for CPACs or shakers. The slots can be exchanged easily giving maximum flexibility. The STC can be operated manually using the touch screen display or through the USB interface. The soft- and firmware of the controller allows programming of complex temperature and shaking sequences. The STC uses basically the same firmware as its sister Multi TEC Control (MTC), so no additional integration work is required. Both STC and MTC are prepared for use in customer IVD applications.
Together with the MTC, the STC completes the replacement of the current controller TEC Control 96, which will be phased out by early 2010.
|
|
|
|
|
|
VENTFAB™ Ventilation Ducting
Flexfab's Ventfab consists of a full line of standard and custom ventilation ducting that is available for a variety of applications where foul or fresh, heated or cooled air needs to be exhausted or intruduced...
A full line of standard and custom ventilation ducting is available for a variety of applications where foul or fresh, heated or cooled air needs to be exhausted or introduced.
A rugged, one-ply coated fabric air duct designed for maximum air handling capabilities and minimum weight. The duct is reinforced with a galvanized spring steel, helically coiled wire. Abrasion resistance is assured by the use of an extended "Vin-O-Fab" cover over the wire. A soft cuff to facilitate installation is an integral part of the assembly. Ventfab can be designed for your special fume control system.
Characteristics of Flexfab's Ventfab product...
Easily retracted
Lightweight, easily stored and transported
Designed for use in handling large volumes of air at relatively low pressure.
Additional materials are available: Teflon© coated fiberglass, vinyl coated fiberglass, neoprene coated fiberglass, neoprene coated cotton, neoprene coated nylon, silicone coated fiberglass. Consult factory for additional specifications, materials, sizes and
|
|
Casing: supple for ventilation and heating
Induction Casing: smoke, dust, waste, cuttings, sugar, cereal, powders
|
|
| ... products without technical information |
| |
Durable fractional horsepower motors are available in sizes ranging from 1/20th to five horsepower and include split-phase, permanent split capacitor, capacitor start, and polyphase models. We offer fractional horsepower motors for a wide range of residential and commercial applications:
Heating And Cooling Equipment
Universal lectricä Blowers: A.O. Smith shaded pole, permanent split capacitor and split phase induction motors are used in residential and commercial furnace blowers. Our 5 and 51/2 inch diameter motors are designed for direct-drive and belt-driven applications and come in a wide variety of mounting configurations.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
FHK pipe system
Flexible, endless production, double-walled, monitorable and self-compensating pipe system, -170°C to +150°C, PN 16/25, DN 25-150. Medium pipe: special steel, heat insulation: PUR
Properties:
FLEXWELL district heating cable ® (FHK) is a pipe system that offers a high level of safety thanks to its double-walled design (with metal inner and outer pipes) and its integrated monitoring system.
|
|
Under Floor Central Heating Systems
Polyplumb offers three configurations of under floor central heating suitable for new build, retrofit, or any type of construction. All are compatible with standard central heating boilers and are especially suitable for use with condensing boilers which give maximum efficiency at low output levels.
|
|
... see all the products in the category
Hoses
|
|
|
|
|
The use of under floor heating typically allows room temperatures to be reduced by 1°-2°C when compared with radiators, while still providing the same level of comfort. Each 1°C reduction in room temperature reduces fuel consumption by 6%. This means it is cheaper to run and gives the house a reduced carbon footprint.
As underfloor central heating is the enabler to maximise the use of low or zero carbon technologies for heat generation such as air source heat pumps or geothermal systems, it is key to sustainable indoor environments.
At Polypipe we manufacture the most complete range of floor heating systems for every application. Solid floor systems provide 'thermal mass' solutions and incorporate our unique floor panel, which enhances performance and requires less screed material than other systems.
The patented Overlay system provides a unique retro fit underfloor system, unlocking for the first time the massive potential for energy efficient under floor central heating in existing dwellings.
|
|
|
|
see the results for the following category : 
