|
|
Easy Installation
Plug and play concept
Single electrical connection
All units pre-commissioned
Self regulating.
Minimal maintenance
Long service intervals
Few component replacements
Ergonomic design for fast access to key components.
Significant cost savings
Increased reliability and lifetime of tools and equipment
Reduced pipe work leaks, meaning reduced energy bill
Fewer repairs to tools, machines and pipe work
Less inconvenient breakdowns and stoppages
Minimal chance of product spoilage through moisture carryover
|
|
Drying Systems - 201 Series
The Ultra Air 201 Series Refrigerated Dryer provides just that: a competitively priced dryer with consistent pressure dew points (33°F - 39°F), delivered quickly and backed by a five-year warranty.
Every dryer is designed with energy savings in mind. All components are properly sized to assure that no energy is wasted. Ample inside cabinet space and easy access components make for simple future maintenance and adjustments. Since only top quality components are utilized, the 201 Series will give the customer years of uninterrupted service.
Standard Specifications:
Maximum Pressure: 225 PSIG (16 BAR)
Minimum Pressure: 29 PSIG (2 BAR)
Maximum Temperature: 158 F
Voltage: 115/1/60, 208-230/1/60, 220-240/1/50
Power Consumption: 12 Watt Max
Pre-filter Rating: 0.3 Micron (Coalescer)
Afterfilter Rating: 3.0 Micron (Particulate)
Cycle Time: 4 Minutes
Purge Loss: 12%
Air Outlet Conditions: Dry air down to -40 F Dew Point
Power Cord: Standard 8 ft
|
|
|
|
|
|
Technology : Refrigeration dryers.
Flow rates treated : from 20 to 1,650 m3/h (in accordance with ISO 7183)
Greater flow rates available on request
Pressure Dew point: ¡Ý +3¡ãC.
Type of cooling: Air Water (models ¡Ý 1000 m3/h)
Operating mode: These dryers eliminate the water vapour in the compressed air by reduction of the temperature of the compressed air through the use of a cooling circuit.
Standard equipment:Dew point indicator.Integral automatic drain. Stainless steel heat exchangers (models up to 125 m3/h) or aluminium heat exchangers (model ¡Ý 150 m3/h). Integral microprocessor controller for models ¡Ý 150 m3/h.
R134a refrigerant which respects the environment on all models.
Key points : Compact design. Low operating cost and pressure loss. Simple installation and use. Easy, fast maintenance. Generously sized heat exchangers ensuring an optimum dew point. Energy saving system on all models: control of the operation of the dryer in accordance with the actual demand.
Applications:
Suitable for all users wanting to obtain compressed air meeting class 4 or more of standard ISO 8573.1:2001 (WATER section).
|
|
|
|
|
|
Low operating costs, modern design and up to 65 % less refrigerant, are surely enough reason to consider the arctic starrefrigeration dryer range when making a decision on your next dryer purchase requirement!
29 models with flow rates from 25 m3/h (15 cfm) to 6600 m3/h ( 3885 cfm) covers the majority of compressor installations. The arctic stardryers are part of a complete product range of refrigerant air dryers. We can supply larger sizes and dryers to work at pressures up to 50 bar.
-Also available 60 Hz version (12 m³/min / 7 cfm - 6600 m³/m / 3835 cfm).
-Higher volumes and high pressure units on request!
Phone: 0049 2054-934-0 (Germany)
-Standard equipment:
condensate drains form the standard
equipment of the AS refrigeration dryers.
Generally all the refrigeration dryers of the series are
equipped with a refrigerant which is not harmful to ozone.
AS 0012 to AS 0540 include required accessories such as
dew-point indication and on/off switch.
AS 0660 to AS 6600 are fitted with a microprocessor
controller and a diagrammatic view of the air and refrigeration circuit.
|
|
Quality
- High reliability attained through the development of the dryers in the CDX range.
- First-class components that have been tested under the worst possible operating conditions.
- Constant dewpoint under any load condition.
- Automatic operation.
Savings
- High energy savings due to low pressure drops throughout the system.
- No wastage of compressed air because of the intelligent automatic discharge of condensate.
- A cleaner compressed air distribution network without leakage.
- Greater reliability and longer life of applications.
- Less maintenance and easier maintenance both due to the reliability of the components and the easy access to any internal component.
|
|
BD : "The industry benchmark for desiccant dryers"
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's BD desiccant dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
Dry air at any time
Supreme energy efficiency
Easy installation, Complete design, Plug & Play
Advanced Control & Monitoring Solutions
The Reliable choice
Proven Peace of Mind
Built for Endurance
|
|
Moisture and dust that are naturally present in air can lead to premature deterioration of your pneumatic equipment, and increase the risk of product spoilage.
The DB adsorption dryer range guarantee delivery of dry, clean air that will satisfy even the most sensitive applications.
It’s a global solution for any demanding air treatment.
|
|
Clean Air System
- Removes water vapor at the point of use
- Desiccant changes color when it needs to be change or recharged
- Outlet screen keeps desiccant particles out of tools
- Oil Removal filter removes 99.9 % of all oil aerosols
- Easy Maintenance
|
|
FD : "The industry benchmark for refrigerant dryers"
Clean and dry compressed air: it is vital to power up your busy production environment. Containing moisture, aerosols and dirt particles, untreated compressed air poses a substantial risk as it can damage your air system and end product.
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's FD refrigerant dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
Dry air at any time
Space-Saving, Easy Installation
Advanced control & Monitoring solutions
Supreme energy efficiency
Powerful & reliable
Efficient water separation
Unique & effective heat exchanger technology
Proven peace of mind
Built for endurance
|
|
In classical applications where the air network is not below 0°C or 32°F, the technology of the refrigeration dryer with dew point of 3°C (37.4°F) completely eliminates the water contained in the compressed air.
Using a DW dryer is an guarantee to produce compressed air of the best possible quality
|
|
BOSSMAN Heatless dryers unique features
Supplied as a complete unit, which is ready for use.
Low initial cost. The heatless method contributes to low maintenance and is most reliable.
They are self-regenerative and produce low levels of noise.
The specially designed digital electronic control for the variable cycle of adsorption dryer allows automatic switching off of the regeneration air.
This resulting in a lower cost expenditure.
The specially designed high -efficiency dryers can be used in all
applications,and the regeneration air flow can be adjusted to suit the
particular operating conditions.Therefore running cost reduced
The specially mixed adsorption medium ensures a longer life to the unit.
Fully automatic systems work continuously gives uninterrupted airflow.
It requires only 230V,AC power supply to operate the system.
Even if power fails it giving uninterrupted air flow.
|
|
BOSSMAN Refrigen Dryers Advantages
High energy saving and reduction upto 90%
Modern technology with high efficiency
Easy and flexible in use
Refrigeration R 134a, as std and R22 on request
Extremely low pressure difference and therefore high over load capacities
Proved concept of highly energy saving heat exchangers
Few moving parts
The low pressure drop
Secure operation upto an environmental temperature of + 50°C.Suitable for hot climates
Integrated condensate drainage systems
Secure operation also at high humidity in compressed air -inlet
Guaranteed Constant Dewpoint and long service life
Low maintenance and always reliable
Maximum safety standards
|
|
|
Dryers for compressed air with refrigerant circuit of the “LB - Little Bear”, “GB - Great Bear" and “Pole Star” series. There are 22 models whose capacity ranges from 36m3/h up to 10.800 mc/h. Either the R 134A or R 407C or R404a ozone-friendly refrigerant is normally used. The program is completed with Filters for compressed air "FH" series, , Manual, Electronic and Capacitive condensate drains.
|
|
Clean and dry compressed air: it is vital to power up your busy production environment. Containing moisture, aerosols and dirt particles, untreated compressed air poses a substantial risk as it can damage your air system and end product.
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's CD dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
|
|
Compressed air always contains moisture, traces of compressor oil and dust particles.
These impurities can lead to serious problems. Corrosion pockets or deposits build up in air tools and equipment. This makes them operate less efficiently and reduces the quality of the products manufactured. Maintenance work becomes necessary and costly downtimes occur.
|
|
The demand for 100% clean and dry air is becoming more and more essential because of both environmental demand and in order to prolong the lifetime of your equipment requiring compressed air.
To ensure both clean and dry compressed air, JUN-AIR offers three types of dryers: adsorption dryers, membrane dryers and CO2 dryers, which are - unlike many types of dryers in the market - designed for continuous operation.
|
|
DHA Series and CDA Series Heat-Les™ Dryers (60-1,600 scfm)
Critical applications and hostile environments challenge common industrial dryer designs. DHA Series (-40°F) and CDA Series (-100°F) dryers deliver unrivaled performance and reliability through standard and customized orientations. Pre-configured dryer packages range from a basic fixed-cycle unit to a high pressure, corrosion-resistant model. Every unit we build incorporates our AMLOC® energy management system to assure long component life cycles and maximum energy savings
|
|
ADR 100 ADR 140
Capacity (l/min.) 10.000 14.000
Electric tension (Volt/Hz/Ph) 400/50/3 400/50/3
Air connection ('') 2 2
Dimensions (l x w x h, cm) 86.5x101.7x110 86.5x107.7x110
Weight (kg) 260 293
Coolant R 134 a R134 a
Ordernr: Code
39629 ADR 100 B
39630 ADR 140 B
|
|
KZP Series
Blower Purge Desiccant Air Dryers
(500 - 4,300 scfm)
KZP Series, Blower Purge Desiccant Dryers are 100% efficient at delivering full supply-side compressor capacity. As compressed air generation tends to be the most costly utility within a facility, KZP Series users benefit from the ability to purchase a less expensive air compressor and a 20% reduction in air compressor energy consumption. Eliminate purge air loss to align supply-side equipment with demand-side requirements to optimize your air system.
* Ambient air used for regeneration - no process gas lost to purge
* Quality process control valves provide dependable operation
* Optional Energy Management System for maximum energy savings
* Pre-mounted prefilter and afterfilter (other mounting options are available: duplex, block and bypass valves)
|
|
|
|
|
|
high quality air for laboratories, food processing, robotics, telecommunications, laser applications
electronic instrumentation and control
compressed air systems operated at temperatures of less than 3°C
sawmills, ready-mix concrete plants, quarries, chemical and pharmaceutical industries
ALC adsorption dryers provide hi|gh efficiency continuous operation. Upline and downline filtration with automatic purge are fitted as standard, enabling the dryers to provide dry, dust-free air.
Advantages of ALC dryers:
Dependable continuous operation at maximum capacity
Desiccant changes colour when saturated, enabling the dew point to be monitored
Low pressure drop
Columns pressurised regularly and progressively ensuring constant output pressure and long desiccant life
Tough, compact epoxy-coated steel casing
High quality silencers keep noise levels below 78 dB(A)
Upline fiitration: 0.01 micron with submicron filter, downline filtration: 1 micron
Simplicity and low maintenance costs. No-mess desiccant cartridges are quick to replace.
|
|
Mikropor VT/MB dryers are the industry leading non-cycling refrigerated dryer for compressed air. VT Refrigerated Air Dryers are designed for European market requirements. MB Refrigerated Air Dryers are designed for the North American market requirements.
With over 25 years of use around the world, Mikropor dryers have proven to be easy to maintain and very durable. With leading refrigeration components, the unique Mono-Bloc heat exchanger and environmentally friendly refrigerants, MB & VT dryers consistently deliver 38° F dewpoint.
FULL RANGE: Mikropor offers a variety of VT/MB dryers - equipped with the Mono-Block Heat Exchanger - to meet a full range of capacity and power requirements.
VT/MB dryers feature the high-performance, industrial strength, Mono-Block Heat Exchanger - the world's most unique and proven design that guarantees consistent dewpoint performance at 0-100% capacity.
|
|
|
Compressed air systems for commercial vehicles have to be protected against internal corrosion - and also against freezing under extreme climatic conditions - so as to maintain their functional reliability. The air dryer extracts the humidity contained in the ambient air from the compressed air; oil and impurities are separated via a filter integrated in the filter cartridge. MAHLE air dryers provide reliable protection against disturbances and premature wear of the entire compressed air system.
|
|
|
|
|
|
Drying Systems - LFT/LFE/LFA Series
Ultra Air Heatless Regenerative Dryers delivers a -40 F PDP, a dewpoint lower than that required by the Instrument Society of America. In colder climates, weather can negatively affect productivity by literally freezing and completely blocking outdoor air lines. Instrument air requires a quality of air that only a Regenerative type dryer can deliver. Therefore, whenever lower dewpoints are required for outdoor piping, instrument air, process air or gas drying, the Ultra Air Regenerative Dryings are the perfect solution.
Features:
Generous quantities of activated alumina desiccant
Centrally mounted pressure gauge and relief valves on each tower
ASME inspected and stamped and CRN registered pressure vessels (100 CFM and above)
Purge air mufflers to reduce exhaust noise
115-160, NEMA 4x electrical
Repressurization of regenerating tower before it goes on drying cycle to prevent desiccant dusting.
-40º F pressure dewpoint (lower dewpoint available)
Control air filter
Low pressure drops (3PSID maximum)
Fail safe mode
Dryer sequence lights
Reliable and proven inlet air control valves and purge valves assure years of reliable shifting of towers and proper dryer operation (Lifetime Warranty) LF Series 25-620 CFM.
1 year warranty
NEMA 4x
|
|
|
A full range of compressed air dryers including refrigeration and desiccant modular and twin tower dryers.
|
|
|
|
|
|
Compressed air is an important provider of energy for industry; what is often overlooked however is the need to provide quality treatment for this air. Compressed air contains condensate which, when cooled, will turn into water, causing extensive damage to both the compressed air network and the finished product itself.
WDRD refrigeration dryers actively remove this condensate to achieve near perfectly dry compressed air. The benefits are notable: less system downtime, reduced costs and maintenance, and an improved finished product. WDRD, thanks to its PlusPack heat exchanger (patent pending) and the most compact dimensions on the market, will prove a major asset in your factory.
* "Plug & Play" Design for Easy Installation and Operation
(WDRD10 - WDRD125)
* Small Space Saving Design
* Oversized Demister Separator Resulting in Excellent Liquid
Removal Over all Operating Conditions
* Low Pressure Differential Across The Dryer (1.45 PSIG Average)
* Environmentally Friendly Refrigerant
* Oversized Condenser to Operate in Ambients to 122°F (50°C)
* All Models Incorporate a Dewpoint Indicator
|
|
Air Dryer for Commercial Vehicles
Trucks installed with air-brakes apply the brake using compressed air supplied from the compressor, although the water content of the compressed air can cause rust and/or freezing in any equipment in the air brake system, leading to malfunctioning of the vehicles. The air dryer acts to remove any water content from the compressed air and delivers dried air into the air brake system. Nabtesco's air dryers have been adopted by all the heavy-duty truck manufacturers in Japan.
|
|
Refrigerated Air Dryer: IDFB, IDF
IDF refrigerated air dryer series, in compliance with the Montreal Protocol Regulations, uses refrigerants R134a and R407C to prevent any damage to the earth's ozone layer. (Medium size series use R22). Series IDF can accommodate an inlet temperature of 40°C. System efficiency is improved by using a high performance heat exchanger.
|
|
|
|
|
|
Legendary CHA Series Heat-Les™ Dryers (1,800-12,100 scfm)
CHA Series Heat-Les™ desiccant compressed air dryer is the most reliable, energy efficient, large-flow heatless dryer available. Standard designs are offered for flows ranging from 1,800 to 12,100 scfm, pressures from 60 to 150 psig, and pressure dew points of -40°F to -100°F. Other sizes and pressures are available upon request. These dryers can be used in continuous or intermittent service, downstream of oil lubricated or oil-free compressors, and are compatible with corrosive, toxic or explosive environments. Every unit we build incorporates our AMLOC® energy management system to assure long component life cycles and maximum energy savings.
Simple design with few moving parts for economical first cost and dependable operation.
Legendary Century Series control valves feature stainless steel internal parts designed specifically for desiccant dryer service and tested to 1,000,000 cycles, bubble-tight.
Patented AMLOC® Energy Management System for maximum energy savings.
Advanced Dryer Control System (ADC) includes a functioning schematic for easy reference to system operation.
Down-flow drying extends desiccant life 5 to 7 years and prevents desiccant attrition during upset (fluidization) conditions.
|
|
ADX Solutions - VRA - Vacuum Regenerated Air Dryer
Features:
* TSA fixed 8-hour cycle (energy saving variable cycle AutoDew available as option)
* Extensive range of flow capacities from 167 to 17,000 Nm³
* Zero purge loss
* Optimised activated alumina and silica gel layered desiccant bed
* Electric heater and centrifugal vacuum blower at 380/460/600V
* Pressure range 4 to 11 bar g (higher pressure operation available)
* Standard dew point -40°C PDP (-70°C and -20°C PDP available as options)
|
|
|
|
|
|
SECCANT Regeneration Dryer - Safe and Low Maintenance Drying of Air and Gases
High Pressure Dryer SECCANT
SECCANTReasons for drying compressed air and gases
Compressed air and gases contain moisture and other contaminants that, if not removed from the air stream, may cause serious damage to the compressor system, tools and test pieces. Costly repairs and maintenance can result from accumulated corrosion, icing and dirt. The development of a failsafe, cost effective regeneration dryer for operating pressures of up to 350 bar / 5000 psig is an answer to the rising demand for dry and clean high pressure compressed air and gases.
How high pressure dryers work
Drying of the air and gas stream is achieved through adsorption. The molecular sieve with very large surface area accumulates water molecules from the gas stream. This process is reversible, that is, molecular sieve saturated with water molecules can be regenerated by a desorption process. Regeneration is achieved using a partial stream (maximum 5%) of the already dried medium. The low requirement of air for regeneration is due to the large difference in pressure between the between the operating pressure of 90-350 bar / 1300-5000 psig and the regeneration pressure, which corresponds to atmospheric pressure of 1 bar / 14.5 psi absolute. The regenerating air is channelled through the saturated molecular sieve and regenerates the adsorber by means of the partial decrease in line pressure.
|
|
|
|
