|
|
Camfil Farr has an extended range of medium efficiency pleated panel filters with cardboard or metal frames. All of them are produced according to the highest Camfil Farr standards.
One example is our Camfil Farr 30/30® filters. The Camfil Farr 30/30 has the highest performance and lowest energy consumption in its calss available.
Our exclusive media is bonded to a welded wire grid and then formed into a radial pleat, allowing full use of the media. This configuration allows the 30/30 filter to hold more dirt and last longer. The 30/30 frame is made of water-resistant beverage board instead of recycled cardboard, so the 30/30 will stand up to the worst conditions an HVAC system will present. No filter distortion or blowouts.
|
|
|
Camfil Farr Megalam Panel Filters provide fine airborne particulate control to meet the requirements of today's high-tech clean rooms, clean benches and clean air devices. With configuration and performance flexibility, the Megalam Panel provides the highest level of protection for product processes and personnel.
|
|
Description
Effective separation of superfine dust and oil particles smaller than 1 pm. This filter complies with the required permissible maximum dust transmittance level of 0.5 % of the EUREVEN® filter class and is therefore classified into the BIA category M. We will send you a copy of the BIA test certificate on request. In terms of common filter classifications, the EUREVEN® filter satisfies the requirements of filter class F9. This means that this filter can replace in many cases high-performance bag filters of class
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
|
ACS carbon filters are used to adsorb gaseous odours and impurities from the air stream and are available pre-assembled as either cartridge filters or panel filters or alternatively supplied in loose bulk form as well as carbon coated foams and synthetic media. The cartridge shown here is particularly abrasion resistant whilst offering low air resistance. Along with standard grade carbon a comprehensive range of impregnated carbons is available in various particle sizes. For the more demanding of applications the range is completed by chemical adsorption and oxidation filters incorporating specially designed granules.
|
|
Honeycomb activated carbon filter mesh is made by loading activated carbon on polyurethane materials,which has carbon content of about 35-50% and excellent adsorption functions. It can be used for air purification such as getting rid of volatile organic compounds, dust in the air, smoke, adors and pollutants such as toluene , and formaldehyde. It is mainly used for air cleaner, air condition and etc. It is easy to be made into any shape ,has low resistance of airflow and pressure falloff.
Material characteristic:
Width: 3-20mm
Pore Size: small middle large
Benzene Adsorption Capacity: 25-32%
Gas Resistance: 1.0m/Sec
Pressure Falloff:4mm:42Pa
20mm:98Pa
|
|
Applications
Clean room technology
Production facilities, air-conditioning and ventilation technology
Consumer products and electronic devices
(e.g. cooker hoods, vacuum cleaners, mobile room air systems, laser copiers, laser printers)
Advantages
Clean room technology:
Reducing the number of rejected parts
Lowering production costs
Increase process reliability
Improving product quality
Avoiding corrosion
|
|
|
|
|
|
In addition to standard air cleaners with or without cyclone separators, MAHLE also provides customer-specific air filter elements and air filter housings for passenger cars and commercial vehicles. Air filter elements of various types are used for filtering the intake air. Metal-free filter cartridges with efficient filter media and high dust holding capacity guarantee dust efficiency of up to 99.9 percent. Although cellulose media have predominantly been used for filtration in the past, MAHLE has meanwhile introduced new developments aimed at achieving higher efficiency and dust holding capacities. To this end, multi-layer filter materials made from cellulose, meltblown and nanofibers as well as completely synthetic non-woven materials have already been optimized for mass production.
New developments - air cleaners with activated carbon adsorbers
Owing to the statutory requirements of the North American market, HC adsorbers in the air intake are necessary for reducing emissions. In response to this, MAHLE has integrated an activated carbon element in its air cleaner modules. Hydrocarbons are therefore adsorbed which can then escape via the intake system when the engine is switched off.
|
|
Motors Filters and Spare Parts
We offer filters for most collection systems. Please contact factory directly for your special filter needs.
|
|
Laird Technologies has various vent panels to fit specific application needs.
Laird Technologies’ shielding ventilation panels are available in a wide array of materials, platings and mounting configurations. Vent panels offer designers new versatility to meet EMI, environmental and mechanical system requirements. When custom designs are needed, Laird Technologies’ engineering staff helps construct efficiencies in performance, cost and manufacturability from the very beginning stages of the application.
|
|
|
|
|
|
Gas Turbines are a main power source today and high-efficiency filtration is essential for efficient operation. Mikropor Gas Turbine Air Intake Filters are used worldwide and deliver documented performance and very high efficiency over the life of the filters.
The air intake system for gas turbines must provide a clean, uniform airflow while preventing contaminants from fouling the compressor blades. However, turbines are used in many harsh environments, from coastal and offshore settings to desert conditions, and often require unique solutions for the variety of contaminants they face.
Mikropor meets this changing demand by matching the gas turbine micro-environment conditions with the right Mikropor filter - including Pulse-Jet, Static, Panel and V-Bank filters.
Mikropor Gas Turbine Filters offer:
- Documented results
- Very High initial efficiency from unique Mikropor Mikroglass technology
- Low Pressure Drop
- Range of media and products to meet different environmental requirements
- Long Service life due to durable construction and media selection
- Full Range of Efficiencies protects turbines harmful contaminants.
|
|
|
Pockets leaking in man-made fiber or glass fiber with chassis in pressopiegata sheet or plastic material. Besides the dimensions standard they are produced in varying of any measure.
|
|
TP single pockets - A thermally welded pocket construction that provides high burst strength and ensures no contaminant bypass.
* Rigid thermal welded pocket design, excellent for VAV systems and turbulent air streams
* Aerodynamic pocket separators for uniform air flow and maximum media usage
* Very low resistance results in greatly reduced operating costs
* High dust holding capacity
* Available in G3-F6 efficiencies as per EN 779-2002
|
|
Menardi offers the widest selection of filter bags available anywhere. We manufacture and supply filter bags for practically any application and for any OEM style baghouse. Our close relationship with filtration fabric producers means that we can even work with you to design a fabric specific to your demanding application.
Advanced Filtration Treatments
To ensure complete dust capture and release for the filter, Menardi has developed a complete range of surface treatments that reduce pressure drop, lower emissions and extend filter bag life.
Applications
Menardi has success with fiberglass filter bags on many rigorous applications including coal fired boilers, cement and lime kilns, carbon black, and metals manufacturing processing.
|
|
Mikropor Synthetic pocket filters are for HVAC applications and are:
- non-corroding
- leak-free and ultrasonically welded
- sealed to preclude dust breakthrough
- energy efficient due to low average pressure drops, optimized design and full use of surface area.
- moisture-resistant up to 100% relative humidity
- thermally stable up to 70°C (with occasional peaks up to 80°C)
- disposal & environmentally friendly
- incinerable
- constructed with efficient, progressive and 2-layered filter media with break-resistant synthetic/organic fibers and microfibers. Mikropor Pocket Filters use no glass fibers.
Media
- Yellow: F8 - 90-95% Efficiency
- Pink: F7 - 80-90% Efficiency
- Green: F6 - 60-80% Efficiency
- White: F5 - 40-60% Efficiency
Frames & Sizes
- Materials: Incinerable Polystyrene Monoblock Plastic
- Sizes:
287mm x 592mm - 3 & 4 pockets
490mm x 592mm - 6, 8, 10 pockets
592mm x 592mm - 6, 8, 10, 12 pockets
|
|
QualityPak Synthetic Bag Filters
The "Quality Pak" synthetic bag filter is a cost effective, high efficiency filter. Multiple pockets increases surface area and service life. Available in many face and depth dimensions as well as various pocket quantities for maximum performance and minimum cost. Synthetic media does not shed glass particles into the air stream. Available in ASHRAE 52.1 ratings 45%, 65%, 85%, and 95%.
|
|
Nano-Tio2 was deposited on the surface of filter in various material, that has better absorption than activated carbon. Nano-Tio2 visible-light-induced photocatalysis may decompose deleterious gas such as formaldehyde, benzene, ammonia, nicotinism, etc., and sterilize air which may contain germs suspended therin, deodorize air. Light accelerant is harmless to the human body, and last permanently. Photocatalyst Filter ismainly used in sterilization of air machine.
Odor decomposing rate is more than 96%.
Bactericidal rate is more than 99%.
|
|
TURBOMAX
Pocket filter leaking in microfiber of glass to elevated leaking surface.
Rigid pocket filter constituted from a plastic and inceneribile chassis. The leaking septum is in microfiber of glass in class of filtration from F5 to F8. Filter to wide surface 28 mq, bassisime losses of cargo, operating long-life
|
|
TURBOPOL
Rigid pocket filter in polypropylene
The rigid pocket filter Turbopol is constituted from a chassis in riciclabile polypropylene. The leaking septum is in polirpopilene 100% idrorepellente. The elevated resistor to the explosion renders the particularly effective filter in onerous atmospheres. Thanks to the intrinsic qualities of the product obtain the following advantages:
Lowlands losses of cargo
Increase of the ability to I accumulate powders
High efficiency begins them
Operating long-life
|
|
|
|
|
|
TURBOGLASS
Rigid pocket filter in microfiber of glass.
ll filter TURBOGLASS is constituted from a resistant plastic chassis to the heat, totally riciclabile. The leaking material is in microfiber of idrorepellente glass lacking in cellulose, in class of filtration from F5 to F9. The filter does not introduce to its inside some metallic member, as the assemblage of the chassis and the resistor of the leaking septum concurs to avoid ulterior reinforces. The glue chassis being completely on all sides, with sealing poliuretanico, resistant to acids, is lacking in any by pass of the air. The air crosses alone and exclusively the leaking septum. A gasket in polyurethane completes filter TURBOGLASS.
The leaking septum that it constitutes filter TURBOGLASS is 100% microfiber of glass. The microfiber of glass is folded with a system that allows to obtain a uniform spacing between the folds, for a better leaking efficiency and a better withholding of particles and consequently a greater one I accumulate of the powders. Such characteristic assures a resistor begins them much lowland and an elevated operating life of the filter.
The microfiber of glass having to its inside fibers in cellulose is not totally idrorepellente.
|
|
|
|
|
|
QualityCell Rigid Cell Filters
Today's highly efficient air handling systems maximize efficiency by varying airflow according to the needs of the occupied space. The "Quality Cell" Rigid Cell Filter is built with special plastic separators and heavy gauge metal backing to hold the pleated media stable at any airflow for maximum media utilization. The "Quality Cell" is constructed with polypropylene media and separators to discourage microbial growth and is offered in ASHRAE ratings of 45%, 65%, 85%, and 95% and Odor Ban carbon media.
QualityCell V Cell
The mini pleat "V" construction of the "Quality Cell" V cell incorporates 150 square feet of media in a 24 x 24 x 12 filter. This tremendous amount of media allows for lower pressure drops, longer service life, and high efficiency. The entire frame, media, and media separators are constructed of plastic making "Quality Cell" V cell resistant to moisture damage. High blowout resistance makes this an optimal choice for high air velocity applications. Available in ASHRAE 52.2 (MERV) ratings up to 14 (equivalent to 52.1 @ 95%).
|
|
Our line of Finite Conversion Elements are the high quality, exact fit alternative to high priced elements.
We offer an extensive line of replacement filter elements.
|
|
Xebec's criteria for the economical choice of a filter are:
* High flow capabilities
* Low differential pressure
* High dirt-holding capacity by integrating the prefilter medium with the final filtration layers
* Long service life
* ISO controlled manufacturing process
Three filter grades are available:
* Filter Element Grade AE
Efficiency 99.99% at 1 micron. Oil retention down to 0.5 ppm per ISO 8573.1.
* Filter Element Grade PE
Efficiency 99.9999% at 0.01 microns. Oil retention down to 0.01 ppm per ISO 8573.1.
* Filter Element Grade AC
Activated carbon element which adsorbs oil vapor down to 0.001 ppm. It is always preceded by a PE filter series to remove aerosols.
|
|
|
PTFE filter elements are produced by sintering pure PTFE granules,no other substances are used in the construction. These filter elements are usually offered when only 100% pure PTFE can be used. It is normally preferable to offer a K type disposable filter element, if suitable, as both pressure drop and life characteristics are superior to the PTFE elements. The advantage of PTFE is a higher maximum temperature, up to 200°C, and somewhat better chemical resistance. These filter elements should be ultrasonically cleaned to give best results.
|
|
-Aluminum foil mesh with high absorption efficiency for oil smoke;
-Size depending customers demand;
-Safety level: UL Certificate, Class 1 and Class 2
|
|
MIST COLLECTOR GT Fiberglass filter media
MODEL No mist
FILTRATION CLASS G3
INITIAL PRESSURE DROP ( Pa ) 40-55 Pa
FINAL PRESSURE DROP ( Pa ) 250 Pa
FIRE RESISTANCE Classe F1 Sec.DIN 53438
MAX OPERATING TEMPERATURE >120°C
RELATIVE HUMIDITY 100%
|
|
Glass Fibre Filter Media
The ACS glass fibre media are manufactured using computer controlled spunbonded technology producing media, that are of consistent high quality with a progressive density and high dust holding capacity with very low initial pressure loss. The media are suitable for use in high dust applications as primary filters, in H & V installations, as extract filters for paint overspray or as inlet filters for gas turbine installation
|
|
LydAir® MG are non-woven, wet laid filter media for use in pleated air filters. Lydair MG media are comprised primarily of glass micro fibers and are produced with a wet laid process similar to those used for the production of paper. Available efficiencies range from 45% ASHRAE to ULPA (99.995%+). Providing 100% mechanical efficiency, Lydair MG does not rely on an electrostatic charge and will not loose efficiency over time. Specially engineered to provide the highest available efficiency at a minimal resistance to air flow, LydAir® MG is chosen for applications where guaranteed efficiency and consistency is a must and reduced energy costs can provide a distinguishable competitive advantage.
LydAir® MG products may be laminated for applications requiring increased physical strength
|
|
Hi-efficiency filter
This product can filter effectively dust particles and bacteria above 0.3 micron under rating air flow , and can restrain the reproduction of bacteria.
This product can be widely used in ventilation project, operation rooms in hospitals, asepsis room, food factory, semi-conductor parts factory, pharmaceutical factory, air-conditioning for home, central air-conditioning, air fresher and other places with strict air cleanness.
|
|
HEPA grade filters
Microfiltrex designs and manufactures industry standard and bespoke HEPA grade filters for critical environments of handling, long life or resistance to radiation, temperature or chemical aggression. Using the complete range of metallic and non-metallic filter media, we can supply direct retrofits of any HEPA filter already in place.
In addition to HEPA rated filters, Microfiltrex also designs self-cleaning pulsed jet filtration systems to protect existent HEPA banks for gross dirt load, extending the life of the HEPA filter, reducing disposal costs and delivering the captured dust back to the user for processing/disposal.
|
|
|
|
