|
|
|
The ACS HG-series HEPA filters are specifically designed to collect airborne contaminants including toxic dust, filterable viruses, bacteria and mists and can be used equally effectively in both inlet and exhaust applications. The high efficiency of the HGV HEPA-series is achieved using the TFA principle in pleating the glass fibre paper to realise optimum geometry and filter area throughout.
|
|
GFS Wave Filter Media
GFS Wave media is the most versatile single-stage filtration media made for paint spray booths. Lab testing indicates 99.67% particulate removal efficiency and field testing boasts excellent performance and reliability!
Standard Features:
- Exceptional paint holding capability.
- Media Developed and designed for full depth loading with minimal face loading (low run-off)
- Excellent paint removal efficiency to minimize particulate emissions
- Standard and custom sizes are available to minimize particulate emissions
- Accomodates all paints and a wide array of spray applications from clear coats to high solids and beyound.
- Clean exhaust air stream. Exhaust chamber, ductwork and fan are protected from a wide range of coating materials (low penetration).
- Material complies with the requirements of UL 900, NFPA-33, OSHA, and New York rule.
|
|
|
LydAir® MB Synthetic media is available in efficiencies from MERV-10/F5 to MERV 16/F9. It is engineered for consistent processing and performance in stitched or ultrasonically sealed pocket and pleated filter designs. LydAir® MB provides high efficiency and dust-holding while minimizing airflow resistance.
|
|
High Efficiency Particulate Air Filters (HEPA ) are a popular filter type used in indoor air cleaners. They represent state of the art technology and are one of the most efficient types of air cleaner filters used for general air cleaning.
While near HEPA filters generally are considered to have efficiencies at 0.3 microns of less than 99.97% but greater than 90%, a HEPA filter must remove 99.97% of all particles of Atmospheric Dust Spot Test (ASHRAE Standard 52.76 Atmospheric) size 0.3 microns.
Mikropor manufactures mini-pleated HEPA & ULPA (Ultra Low Penetration Air) filters as per the EN 1822 Standard.
The dimensions, efficiencies, air flow requirements and the frame construction define the type of filter to be manufactured.
HEPA & ULPA filters are supplied with individual leak and efficiency tests..
|
|
|
|
|
|
The separation of fumes created during laser cutting requires a special filter medium for submicron particles. In such installations SINBRAN® filters have proved their efficiency over several thousand hours of operation, with emission levels below the detectable limits.
SINBRAN® filter elements are environmentally friendly and are, therefore, suitable for use in the pharmaceutical and food industries. Combined with our newly developed, innovative pre-coating process, SINBRAN® is suitable for the separation of aerosols of organic material, such as those created during laser cutting operations. In the past they could only be treated by complicated processes utilizing wet scrubbers, catalysts or thermal incineration. Dry operating filter units clogged irreversibly within a few days.
With our special pre-coating process (patent pending), an
auxiliary layer is created on the surface of the filter elements.
This coat protects the actual filter surface from adhesive
substances, while absorbing a large portion of hydrocarbons.
The system can also be used for the separation of adhesive
substances or particles.
|
|
Anticorrosion and impact-resistant breather filters supply contamination-free air to reservoirs. A wide range of replaceable filter elements adapted to the needs of the system ensures the degree of filtration required by the hydraulic filter is obtained.
|
|
ACS offers disposable panel filters with either glass fibre or pleated synthetic media infills to suit all applications. The panel filters are constructed within a cardboard surround with the media held in place with either perforated metal or cardboard facings.
- The GZ range are manufactured incorporating progressive density spunbonded glass fibre media ensuring low pressure loss together with high arrestance resulting in cost effective primary filters.
- The VZ range can be manufactured using either pleated synthetic media or high grade glass fibre media to achieve higher level efficiency panel filters, thereby providing a complete range of panel filters, offering optimum performance.
|
|
|
|
|
|
Mikropor Miko-Mat Disposable Panel Filters
The Mikro-Mat fiber glass mat media is formed in a graded density pattern, growing progressively from the the air intake side to the downstream side, allowing dirt to build-up by particle size, to ensure maximum filter life. The media design eliminates face loading.
Mikro-Mat Construction: The enclosure frame is made of two die-cut pieces of heavy-duty board bonded together to form a double wall. For both media, the frames can also be constructed from other types of materials including galvanized steel, stainless steet, aluminum, etc.). Custom sizes can be specified.
Mikropor Miko-Pleat Disposable Panel Filters
The Mikro-Pleat filtering media is made of non-woven synthetic fibers manufactured for high dust-holding capacities. It is treated with a fire retardent additive for safety purposes. The filter media is bonded to an expanded metal support grid (in a diamond pattern). The grid has 98% open face area to increase media performance. The pleated design provides uniform pleat configuration for maximum performance.
The Mikro-Pleat filtering media is more efficient in environments where more uniform and finer dust particleds are present.
|
|
|
A panel filter is a filter media fitted into a frame to be inserted into the dust collector. U.S. Air Filtration panel filters are available in permanent panel filters or disposable panel filters, and are made with media such as fiberglass, synthetic, tackified, and polyester. Panel filters are available with a pinch frame or die cut box frame in 1" or 2" thickness.
|
|
DP40
LEAKING CELLS WAVED TO WIDE LEAKING SURFACE
The filter is constituted from a chassis in double fustellato cardboard. The leaking septum is composed from a mixture of cotton and polyester. A net of support in galvanized aluminum completes the filter glue filter element.
Thanks to the intrinsic qualities of the product obtain the following advantages:
Lowlands losses of cargo
Increase of the ability I accumulate powders
Operating long-life
They are employed in air handling unit and systems to elevated capacity
|
|
NOVApleat is the next generation of extended surface pleated filters. The manufacturing process is fully automated ensuring consistent quality and uniform performance.
* Fully automated fabrication for consistent quality
* Square pleat tip provides added rigidity making filter extremely durable
* High capacity model available
* Center support strut eliminates breaching
* 100% metal free design
* Available in G3 and G4 efficiencies as per EN 779:2002
|
|
|
|
|
|
GQP Pleated Panel filters
Achieve MERV 13 rating with our "Green Quality Pleat" (GQP). Our GQP is a cost effective means of upgrading your air quality, while maintaining low pressure drop and long service life.
- Meets "LEED" standards for new and existing buildings.
- All the benefits of the pre-filter and final filter in one compact design.
- Simple easy upgrade for existing equipment.
- Cost effective design helps maintain user budgets.
- Available in all 2" and 4" depths - non-standard sizes available.
- High capacity design increases service life - minimizes maintenance and disposal cost
- Synthetic media does not support microbial growth.
EQP/DQP/MQP Pleated Panel filters
Better filtration is the first step in improving Indoor Air Quality. Pleated Panel Filters outperform ordinary furnace filters with higher efficiency and lower pressure drop allowing air-handling systems to stay cleaner and operate more efficiently. Our EQP (standard capacity) and DQP (high capacity) pleated filters are offered in ASHRAE 52.1 and 52.2 (MERV) ratings and are built to withstand rigorous conditions.
RETURN AIRE GRILLE FILTER
Return Air Grille Filters residential replacement filters are designed to fit existing air filter grilles. Return Air Grille Filters are designed with a 5" filter depth that provides 9 times the media area of a comparible 1" filter, which greatly reduces pressure drop while increasing service life. Return Air Grille Filters utilize a unique knife edge seal header to prevent bypass, and can last 6 months to a year in most home installations. Return Air Grille Filters are offered in MERV 8, 11 and fume control ratings.
|
|
|
|
|
|
QualitySeal Polyester Ring Panel and Link Filters
"Quality Seal" Ring Panel filters are constructed of two layers of polyester material heat sealed around an internal wire grid support. The graduated density and tackification of media combines high dust retention with good efficiency. The internal wire support is heavy gauge steel to withstand high air velocity. Polyester overlap around the support wire offers a self supporting positive seal to eliminate bypass. "Quality Seal" Link filters are a connected series of ring panel filters, preventing bypass between filters.
QualitySeal Polyester Pads and Rolls
We offer an array of "Quality Seal" polyester medias, each with a unique blend of fibers, binders, and tackifiers to meet a broad range of HVAC and paint filtration needs. Available in pre-cut pads and slit rolls, or in master rolls, "Quality Seal" polyester medias are an economical choice.
QualitySeal Polyester Pads and Rolls
"Quality Seal" Cube Filters offer up to five times the filter area of a flat panel filter of the same face dimensions. This means longer service life and less maintenance time. Polyester overlap around the support wire offers a self supporting positive seal to eliminate bypass. "Quality Seal" cube filters are offered in many types of polyester media for use in particulate and paint overspray collection.
|
|
In a unique high-temperature sintering procedure, glass filters are produced of pure borosilicate glass 3.3, that are used in many applications, where filtration is used and needed.
The product range varies from standard filter-crucibles, -funnels, -candles, conical funnels to special design sintered filters for analytical sensors, chromatography and radiology research.
The latest milling and separating technologies ensure the quality of the raw-materials made by our own production. Reliable processes and years of experience of our qualified staff as well as constant education of all colleagues guarantee the high quality of our production.
|
|
Filterdiscs are available in many round and rectangular shapes ranging from 5 mm up to 500 mm.
Many special design discs are manufactured by our produc- tion according to customers specifications
|
|
Next to a large variety of standard types, ROBU® produces many special designs also according to your specific requirements.
Round and rectangular discs of 450 x 450 mm and tubes up to 1.200 mm length are available.
|
|
|
Braden filters are standard on many OEM-supplied filter houses, because Braden manufactures the highest quality filters for Gas Turbine and Compressor Intake Systems available on the market today! Braden Filters are approved for all GT classes, including ultra-efficient large frame turbines. Our TriCelTM Final Barrier Filters combine high volumetric air flow and extremely low pressure drop along with the dust-holding capacities required by the newest generation of super efficient GTs. Call us for: prefilters, coalescers, barrier final filters and self-cleaning pulse filters.
|
|
|
ATI Dust Filters are narrow profile EMI dust and air filters. An aluminum frame surrounds aluminum tinsel media and is welded in place. Aluminum tinsel media filters the air and entraps dust particles. The aluminum frame and tinsel media combination performs as a gasket. Alco-Knit gaskets are supplied on select extrusion profiles. Dust filters are supplied in standard .172 through hole diameters for easy installation mounting. Depending upon location, filters may be vacuum cleaned in place or removed and blown with light compressed air or cleaned with mild detergent. ATI Dust Filters are primarily used at air intake locations requiring narrow space limitations to entrap dust particles, shield and cool air flow.
|
|
Can be applicable for seperating tiny dust particulate in general ventilation system
- Unique chemical fibre filter media,offer stable efficiency in useful lifetime
- Outside frame is made of zinc galvanizing plate or Aluminium alloys
- Optimize V-shape filter bag structure,low resistance,long useful life
Can be applicable for seprating tiny dust particulate and submicron flecks of dust
-Super-thin glass-fibre filter media,offer stable efficiency in useful lifetime
- Offer high and stable efficiency during the operating time,large dust capacity, superior performance compared with chemical fibre filter media.
- Optimize V-shape filter bag structure,low resistance,long useful life.
|
|
Outside filters
This filters are used in areas where the aesthetics of the pumping station is not important.
There are three types of outdoor filters depending on the material they are made of: reinforced Polyester with glass fiber, stainless steel and aluminum
|
|
|
|
|
|
|
ATI 3-Layer Filter is a superior dust filtration, EMI shielding filter for minimum air flow requirements. Aluminum extruded profiles surround three layers of aluminum screen and are welded in place. Three layers of wave formed aluminum wire screen, each with a decreased depth are layered together resembling the look of a continuous wave. The combined layers of aluminum screen entrap dust particles. Both sides of the 3-Layer Filter are protected by a rigid grill. Select from Alco-Multi Gasket, a combination of neoprene sponge and monel mesh, Alco-Knit or conductive gaskets for shielding and environmental requirements. Through hole locations are customized for easy surface mount installation with standard 8-32 rivnuts or .203 diameter holes. Plating options enhance shielding effectiveness. 3 Layer Filters can be vacuum cleaned in place, removed and blown with light compressed air or cleaned with mild detergent, ATI 3-Layer Filter is suited for use in enclosures, electronic equipment and portable military control stations.
|
|
Coarse / Pre Filters
Coars / Pre Filters are primary stage of filters used to arrest large dust particles of size down to 10 micron and to filters lints,soot,plant pollen,insects and dust from atmospheric air,Thease filters are classified under DIN EN 779 / ASHRAE 52.2-1999.These filters are used in virtually any air handling applications.
Better filteration is the first step in improving indoor Air Quality. Pleated panel filters outperform ordinary furnace filters with higher efficiency and lower pressure drop allowing air-handling systems
to stay cleaner and more efficiently
|
|
Sécur' Air - Box carry-filter of safety
3 dimensions of box for filters of standardized size: 3.6.2, 6.6.1 and 6.6.2.
Type of filters which can be used (to be ordered in addition):
. High effectiveness (F7 and F9): FR MP GD in 3.6.2 and 6.6.1 and 6.6.2.
. Activated carbon: FR CO in 3.6.2 and 6.6.2.
To use when it is imperative that the operator or the environment is not in contact with the compounds contaminents (particles or molecules) which are on the filter or in the box.
Air extracted in microbiological laboratory of safety (P3 or P4), drug company or chemical.
|
|
|
|
|
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process
|
|
compressed air filters ‘soak up’ oil and water and are said to run in a ‘wetted out’ or saturated state. This temporarily blocks the path of compressed air through the normally open filter structure and increases the operating pressure drop as the air flow has to force liquids through the fine matrix of the filtration media. This leads to the higher energy consumption.
Unlike typical filters, the Bossmanfilter's Microfilter elements are
does not soak up in liquids, ensuring the available open area is kept to a maximum for dirt Liquid aerosols coalesce within the anti re-entrainment barrier and fall into the filter bowl to be discharged via the drain.Solid particulate is captured and held within the open area of the filter media, eventually increasing the differential pressure to a point where it is more economical to replace the filter element.
|
|
HEPA FILTERS are manufactured in cleam room to ensure
consistent and predictable quality of air filtration.The filter media
is specially made of high quality fine fibre,which is water repellent
and high strength.These filters are manufactured in multiple fold
media spaced by hemmed edges of aluminium seperators and
packed in specially designedframes to provide rigidity and uniform
air flow.
Each HEPA Filter passes through stringent testing and finds reliability in critical applications like nuclearapplication,
semiconductor complexes,hospitals,pharmaceuticals,food processing,Biotechnology,electronic and Aerospace.Efficiency and Pressure drop are certified on each identification label.
|
|
|
|
|
|
The process is founded on the deposition of particles (fogs, dust, bacteria,...) contained in the air and gases, by a system of ionization and electrofiltration. The flow of air charged with particles crosses a cylindrical tube. An electrode ionizes the particles which then are collected and trapped by a metal knitting in periphery.
This principle makes it possible to purify, cleanse, recycle and deodorize the ambient air of public spaces, or industrialists (Industries of treatments of waste, of refining, the iron and steel industry, the nuclear plants, the tunnels, the undergrounds, the offices, the hotels, the restaurants, the hospitals, agribusiness industries, the diesel engines....).
According to the Ecomesure study realized in 2007, ACOFILTRE-Atec makes it possible to destroy 99.9% of the toxic particles contained in the ambient air and in particular in confined spaces. This electrostatic precipitator can collect particles lower than 0. 03 Microns. (study at disposal)
Contrary to the other systems, ACOFILTRE-Atec is not stopped and requires a cleaning only every 2 years, without change of parts nor necessary particular technical skills. It functions with low as at high temperature, until 900°c. (For example, the power stations of treatment of air competitors function only until 100°c!). In addition ACOFILTRE-Atec makes it possible to treat great flows without pressure loss thus generating serious energy saving. This system is incorporated very easily in ventilation ducts.
|
|
|
|
|
|
We'd like you to believe that our custom fabric filters will solve all the world's dust problems, .but there are some pieces of equipment designed to only use a cartridge filter. A pleated media provides a very large filter surface area within a compact package.
The advantage is that a filter doesn't take up much volume in the workspace. Commercial air intakes and vents work well with this type of filter. Working with many custom and off-the-shelf suppliers, we can easily cross-reference virtually any product or modify a design to solve specific problems. Please use our printable PDF Spec Sheet to note your filter's construction style, critical dimensions, gaskets, rings, etc. and we'll take it from there.
The cartridge's disadvantage is that large amounts of (wood, flour, etc.) dust can quickly fill in the pleats and essentially block all airflow. Small wood shop collectors that collect dust inside the cartridge are a case in point. High replacement costs and tedious maintenance regimens have led more than one user to modify their collector to use our filter bags. We'd be glad to help you make the comparison.
|
|
Retrofit Filter Cartridges
* Improve the performance or solve problems of existing collector systems. Farr filter cartridges are made with PolyTech™ media, the most advanced pulse-cleaned media ever made.
* The HemiPleat separator bead opens up the pleat uniformly, allowing more effective cleaning and lower pressure drop.
* Farr offers replacement upgrade cartridges to fit these and more:
American Air Filter® Torit®
MAC Equipment® UAS/Dust-Hog®
Pneumafil® Wheelabrator®
|
|
|
A full range of air cartridges, which comply with the stringent standards laid down by the companies in the field. These filtering elements are available both with standard filtering materials, as well as customized to meet specific customer requirements; using alternative materials such as polyester, microfibre, paper, stainless steel meshing etc.
|
|
|
|
