|
|
The Camfil Farr Hi-Flo® offers high efficiency grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei. The Hi-Flo is the filter of choice for the removal of nuisance contaminants such as pollens, paper dust and other atmospheric impurities.
The Camfil Farr Hi-Flo incorporates high lofted air laid micro fiber glass media to ensure reliable efficiency throughout the life of the filter. Equipped with a high quality filter material, with small fiber diameter and uniform lofting, it guarantees a consistent and reliable sub-micron particle capture throughout its lifetime. Synthetic micro mesh media backing ensures media protection and support in turbulent or varying airflows.
|
|
The Kermel Tech fibre has been specifically developed to cope with ever increasing thermal and chemical requirements in the field of hot gas filtration.
Kermel Tech offers exceptional resistance to both long-term elevated operating temperatures as well as shorter term high temperature peaks. It guarantees long service life and reliability of filter bag dust removal systems under rigorous conditions.
|
|
Polyamide fibres are synthetic fibres made from linear macromolecules obtained from the polycondensation of bi-functional components. The most industrially used polyamide fibres are Nylon 6 and Nylon 6.6.
Nylon 6.6 is produced by the condensation polymerization of hexamethylene diamine and adipic acid, it is the nylon for antonomasia and the most popular.
Nylon 6 is produced by the condensation polymerization of caprolactuam.
At first sight Nylon 6 and 6.6 do not differ from each other when compared at ambient temperature. But increasing the temperature the tenacity reduces progressively until it is completely zero at 215°C for Nylon 6 and at 255°C for Nylon 6.6.
Characteristics of polyamide fibre
- Resistance to wear
- High elastic recovery
- Easy to dye
- Good colour fastness
- Easy to maintain
- Limited dimensional stability
- High Creep
- Sensitive to chemical reagents
- Poor resistance to high temperatures
|
|
* rimmed
* pleated
* one or multiple layers
* also available with metal fibre felt
|
|
MIST COLLECTOR GT Fiberglass filter media
MODEL No mist
FILTRATION CLASS G3
INITIAL PRESSURE DROP ( Pa ) 40-55 Pa
FINAL PRESSURE DROP ( Pa ) 250 Pa
FIRE RESISTANCE Classe F1 Sec.DIN 53438
MAX OPERATING TEMPERATURE >120°C
RELATIVE HUMIDITY 100%
|
|
Glass Fibre Filter Media
The ACS glass fibre media are manufactured using computer controlled spunbonded technology producing media, that are of consistent high quality with a progressive density and high dust holding capacity with very low initial pressure loss. The media are suitable for use in high dust applications as primary filters, in H & V installations, as extract filters for paint overspray or as inlet filters for gas turbine installation
|
|
LydAir® MG are non-woven, wet laid filter media for use in pleated air filters. Lydair MG media are comprised primarily of glass micro fibers and are produced with a wet laid process similar to those used for the production of paper. Available efficiencies range from 45% ASHRAE to ULPA (99.995%+). Providing 100% mechanical efficiency, Lydair MG does not rely on an electrostatic charge and will not loose efficiency over time. Specially engineered to provide the highest available efficiency at a minimal resistance to air flow, LydAir® MG is chosen for applications where guaranteed efficiency and consistency is a must and reduced energy costs can provide a distinguishable competitive advantage.
LydAir® MG products may be laminated for applications requiring increased physical strength
|
|
| ... products without technical information |
| |
Nextel Ceramic Fibers
3M™ Nextel™ Continuous Ceramic Oxide Fibers 312, 440, 550, 610 and 720 represent a major advancement in refractory fiber technology. This family of metal oxide fibers can be readily converted into ceramic textile products which meet demanding performance requirements in high temperature operating environments. Nextel™ Ceramic Textiles are typically used in aerospace, outerspace and industrial applications.
Because the filaments are continuous and strong, Nextel™ Ceramic Textiles can be produced without the aid of other fibers or wire inserts. Rovings, yarns, fabrics, tapes, sleevings and sewing threads are typical products.
Features of 3M™ Nextel™ Fibers:
- Low elongation at operating temperatures
- Low shrinkage at operating temperatures
- Good chemical resistance
- Low thermal conductivity
- Thermal shock resistance
- Low porosity
- Unique electrical properties
|
|
Made from 3M™ Nextel™ Fibers, these chopped fibers are used in composite applications. The fibers, commonly chopped to 1/8", 1/4" and 1/2" lengths, are widely known for their role in ceramic underbody tiles which protect NASA's Space Shuttles.
NOTE: These fibers are considered non-respirable. Fibers with diameters greater than 3 microns are considered nonrespirable in humans. 3M™ Nextel™ 312, 440, 550, 610 and 720 Ceramic fibers are 7-13 microns in diameter and therefore pose no known chronic health effects.
|
|
|
|
|
|
ZRCI Refractory Sheet Types RS-Cloth and RS-Tape are fiber reinforced alumina composites in a highly flexible form. They are received dried, when wetted with water or Al-HARD Hardener they become extremely flexible. They can be wrapped into many simple or complex shapes and will stick to themselves. When dried they become an extremely hard, strong, self supporting composite structures. RS-Putty can be used to burnish any surface and provide a very smooth hard finish. After a low temperature bake-out of 300°C (570°F) RS-Cloth And Tape are unaffected by moisture.
They offer the strength, durability, flexibility and versatility required by many high temperature applications up to 1300°C (2373°F). Their high alumina content makes Refractory Sheet RS-Cloth and RS-Tape highly resistant to many environments including Hot Glass handling, molten aluminum and chemical and petroleum processing. After they are baked out they are not affected by water as well as many types of fuel oils. When hardened with AL-Hard Refractory Sheet RS-Cloth and RS-Tape become "rock hard" for greater strength.
|
|
| ... products without technical information |
| |
Bekaert Fibre Technologies (BFT) develops, manufactures and markets very thin metal fibres and metal fibre based products.
These metal fibres, in the range of 1 to 80µ thickness, are up to 60 times thinner than human hair and are available in various alloys.
Thanks to permanent innovation, Bekaert Fibre technologies continues to be successful in a wide variety of applications and products. The most important applications are Porous Media, Filter Elements, Conductive Plastics, Heat-Resistant and Electrically Conductive Textiles, Airbag and Burner Pads.
Fibres for concrete reinforcement : Dramix®, Wiremix®, and Dramix®Duo
for industrial flooring, housing, tunnelling and precast. Steel fibres replace in concrete the traditional mesh reinforcement.
Duomix® fibres: polypropylene fibres for crack control at the early stage in concrete.
|
|
• Power supply: from 24 to 230Vac;
from 12 to 110Vdc (with converter)
• Rotation speed: from 1s to 800h
• Available contact: from 1 to 20
• Available cams: screw adjustable, pins
cam, fix cams cutted or injected as
per customer diagram
• Mounting: wall mounted, panel mounted,
DIN rail 35mm
|
|
Wide range of versions:
• Power supply: from 24 to 230Vac;
from 12 to 110Vdc (with converter)
• Mono and multiscale
• Mounting: wall mounted, panel moun
ted, DIN rail 35mm
• Connections: screw, 8 pins, 11 pins,
faston
|
|
Wide range of versions:
• Mono and multivoltage
• Monoscale, biscale and multiscale
• Mono and multifunction
• Mounting: wall mounted, panel mounted, DIN rail 35mm
• Dimensions: modular 17,5 and 22,5mm, frontal 38x38, 38x48, 48x48mm
• Connections: screw, 8 pins, 11 pins, faston
|
|
SB1// D94.61:
• For automatic defrosting of industrial refrigeration plant, commercial
visicoolers and display counters.
FEATURES:
Pre-set number of defrost cycles per day: 1, 2, 3, 4, 6.
Adjustable defrost period with variable profile cam.
Independent power supplies for synchronous motor and for switches
High contact rating (SPDT).
Safety guard for wiring terminals in accordance with CEI 23 – 11 (for
SB1).
ENEC – 03 approval
SB3// D94.63:
• For automatic defrosting of industrial refrigeration plant, commercial
visicoolers and display counters.
FEATURES:
From 1 to 12 defrost cycles per day thanks to non detachable tabs.
Defrost time easily adjustable from 1 to 56 minutes.
Fan delay easily adjustable from 0 to 15 minutes (for SB3.82).
Independent power supplies for synchronous motor and for switches.
High contact rating (SPDT).
Safety guard for wiring terminals in accordance with CEI 23 – 11 (for
SB3).
ENEC – 03 approval.
|
|
• AC Gearmotor and stepper motor
• Many possibilities of coupling among motors and gearmotors
(as shown in our catalogue).
AC Motors
• Power supply: from 12 to 230Vac, 50 and 60 HZ
• Running torque: from 8 to 600 Ncm
• Output shaft speed: from 0,07 to 75 rpm
|
|
• Many possibilities of coupling among motors and gearmotors (as shown in our catalogue).
Gearmotors
• Power supply: from 12 to 230Vac; 12 - 24 Vcc
• Ratios: from 25/3 to 22500
• Max efficiency power: max 4,8 W
|
|
• Functions: Phase sequence-unbalancemissing; current sensitive relay
• With fixed or adjustable threshold
• Adjustable response time and hysteresis
• Power supply: mono, dual, multivoltage
• Dimensions: modular 17,5, 22,5, 45, 55, 70mm
• Mounting: wall mounted, DIN rail 35mm
|
|
• Functions: emergency stop, two hand, contacts expansion, many
configurations available
• Power supply: 24Vac/Vdc;115,230Vac
• Safety category: 2, 4, IIIA, IIIC
• Dimensions: modular 22,5, 45mm
• As per CEE machine directive 89/392/CEE
• Norms: IEC 204-1, EN 60204-1, DIN/VDE 0113
|
|
Digital high counting speed counter
• Power supply: mono or multivoltage from 24 to 230Vac, 24Vdc
• Display: 1, 2, 3, 4 digits
• Wide range of functions
• With or without display
• With or without memory
• Mounting: wall mounted, panel mounted, DIN rail 35mm
• Dimensions: modular 45mm, frontal 48x48, 48x96 mm
• Connections: screw, faston
|
|
• Functions: emergency stop, two hand, contacts expansion, many
configurations available
• Power supply: 24Vac/Vdc;115,230Vac
• Safety category: 2, 4, IIIA, IIIC
• Dimensions: modular 22,5, 45mm
• As per CEE machine directive 89/392/CEE
• Norms: IEC 204-1, EN 60204-1, DIN/VDE 0113
|
|
AC synchronous motor and Stepper motor
• Unidirectional and bidirectional
• Power supply: from 12 to 230Vac
• Running torque: from 0,08 to 4 Ncm
• Output shaft speed: from 375 to 600 rpm
Stepper Motor
• Bipolar stepper motor
• Supply voltage: 12 Vdc
• Full step: 24
• Running torque: fix at 4 Ncm among motors and gearmotors
|
|
Wide range of versions for all industrial
automation fields:
• Industrial washing and dry cleaning
• Driers; industrial ironing machines
• Water cleaning; bottling; packing
• Industrial process machines in general
• Genset controller.
|
|
• Output torque: from 80 to 600 Ncm
• Ratios: from 20/3 to 18,000,000
• Revolution time: from 1s to 800h
• Frictions: unidirectional, bidirectional
|
|
|
|
see the results for the following category : 
