|
|
The Camfil Farr Hi-Flo® offers high efficiency grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei. The Hi-Flo is the filter of choice for the removal of nuisance contaminants such as pollens, paper dust and other atmospheric impurities.
Camfil Farr have a wide range of bag filters with best performance on the market.
|
|
This after-filter retains polluting particles thanks to the following main filtration effects: diffusion, inertia and direct interception.
It is recommended for those machining processes producing fine mists from soluble oil mixed with dusts (especially of conducting materials: e.g. cast iron processes, pressure die-casting etc.).
Our after-filter is available in various models with two different levels of efficiency:
EU9 and EU13. The last one is able to retain also some smokes.
The fibreglass after-filter can be used in combination with the three kinds of air filters (turbine single and double centrifuge) and with all our modular filtration units.
|
|
Varian’s Gas Clean Filter System prevents contaminants entering your GC. Contaminants in carrier gas would result in damage to the column, loss of sensitivity, and unnecessary instrument downtime.
The Varian Gas Clean Filter System, which is positioned immediately before your GC, consists of two elements: the connecting unit and a filter. The uniquely designed filter and connecting unit allow for quick replacement of saturated filters while preventing air from entering your system.
Varian Gas Clean Filters are available for three different impurities; oxygen, moisture and hydrocarbons.
|
|
PCC Series Large Flow Filtration for Air and Gas
(1,600 scfm and larger)
Fabricated from high-quality carbon steel, PCC Series Filters are welded to ASME standards to provide large flow applications with exceptional air quality and low pressure drop. Designed specifically for use with our high performance air and gas filter cartridges, these filters can be used alone or as prefilters and afterfilters. D urable and dependable, PCC Series protects your compressed air and gas system and enhances dryer performance.
Flanged lid allows easy filter cartridge access. No need to disconnect drain valve or other tubing when changing cartridges
Sturdy vessel support legs simplify piping installations
Multi-element, carbon steel housing design 1,600 to 15,000 scfm
Easy to read differential pressure gauge standard on all models
Low housing pressure drop saves dollars (1 psi pressure drop costs, on average, $67 per year per 100 scfm at 6¢ per kWh).
|
|
Features :
• Modern Design and Appearance
• 0.5 Micron Element
• Light Weight
• High Flow Capacity with Minimal Pressure Drop
|
|
Our firm has reached a high level of specialization and is especially equipped to manufacture metal filters in stainless steel, bronze and brass wire and in bronze ans stainless steel powder. With over 30 years' experience, our firm can today offer the market many types of filters to solve all types of requirements. There are many fields of application which besides the main function of filtering liquids, may include:
damping discharge noise emitted by pneumatic equipment
acting as flame-cutters
absorbing gas and liquid spills
separating two liquids with different surface tension
COPOR has certified quality system UNI-EN ISO 9001-2000.
|
|
Vertical or Horizontal constructions mounted on legs or skirts.
Designed to international Pressure Vessel Codes and Standards.
These filters have multiple cartridges securely mounted with the vessel.
Cartridges offered can be of various types of construction depending on the application i.e. Pleated, wound or all metal construction.
Access to the internals can be via a Quick Opening Closure or Bolted Cover.
Flow passes through the cartridges in an in - to out flow direction.
We are able to offer elements that will accept a high differential pressure before mechanical damage can occur.
|
|
Cartridge filters
Automatic compressed air cleaning filters
Bagging filters with polypropylene bags
Self-cleaning filters with closed-circuit storage of waste in collectors
|
|
FILTER DFO
Kongskilde Self Cleaning Cartridge Filters are used for the separation of dust from air in the paper and plastic industry.
Kongskilde supplies air filtration solutions that make manufacturing plants a cleaner, safer environment for employees all over the world.
If a single filter or a multifaceted filter system is required, Kongskilde has the solution.
|
|
Camfil Farr Gigapleat filters are a range of unique products based on the use of adsorbents that are incorporated in a non-woven fiber web. The adsorbents may be made from a very high quality carbon or ion-exchange resin. Variants are available for the removal of acids, bases and condensables.
The media is pleated into flat panels and the panels are mounted in a holding frame (cell, panel or header type). Camfil Farr expertise in pleating concepts and techniques ensures that the optimum combination of factors is obtained. In particular high efficiency and capacity values are achieved at low pressure loss.
|
|
The Camfil Farr Opakfil Green® provides high efficiency filtration in a light weight and compact format. OpakfilFor use in any air conditioning application and preparatory filtration in cleanrooms.
opakfil_greenIt can remove all contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei which makes it a very good choice for improving your indoor air quality.
|
|
The Camfil Farr Hi-Flo® offers high efficiency grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei. The Hi-Flo is the filter of choice for the removal of nuisance contaminants such as pollens, paper dust and other atmospheric impurities.
The Camfil Farr Hi-Flo incorporates high lofted air laid micro fiber glass media to ensure reliable efficiency throughout the life of the filter. Equipped with a high quality filter material, with small fiber diameter and uniform lofting, it guarantees a consistent and reliable sub-micron particle capture throughout its lifetime. Synthetic micro mesh media backing ensures media protection and support in turbulent or varying airflows.
|
|
Our firm has reached a high level of specialization and is especially equipped to manufacture metal filters in stainless steel, bronze and brass wire and in bronze ans stainless steel powder. With over 30 years' experience, our firm can today offer the market many types of filters to solve all types of requirements. There are many fields of application which besides the main function of filtering liquids, may include:
damping discharge noise emitted by pneumatic equipment
acting as flame-cutters
absorbing gas and liquid spills
separating two liquids with different surface tension
COPOR has certified quality system UNI-EN ISO 9001-2000.
|
|
Our firm has reached a high level of specialization and is especially equipped to manufacture metal filters in stainless steel, bronze and brass wire and in bronze ans stainless steel powder. With over 30 years' experience, our firm can today offer the market many types of filters to solve all types of requirements. There are many fields of application which besides the main function of filtering liquids, may include:
damping discharge noise emitted by pneumatic equipment
acting as flame-cutters
absorbing gas and liquid spills
separating two liquids with different surface tension
COPOR has certified quality system UNI-EN ISO 9001-2000.
|
|
TURBOGLASS
Rigid pocket filter in microfiber of glass.
ll filter TURBOGLASS is constituted from a resistant plastic chassis to the heat, totally riciclabile. The leaking material is in microfiber of idrorepellente glass lacking in cellulose, in class of filtration from F5 to F9. The filter does not introduce to its inside some metallic member, as the assemblage of the chassis and the resistor of the leaking septum concurs to avoid ulterior reinforces. The glue chassis being completely on all sides, with sealing poliuretanico, resistant to acids, is lacking in any by pass of the air. The air crosses alone and exclusively the leaking septum. A gasket in polyurethane completes filter TURBOGLASS.
The leaking septum that it constitutes filter TURBOGLASS is 100% microfiber of glass. The microfiber of glass is folded with a system that allows to obtain a uniform spacing between the folds, for a better leaking efficiency and a better withholding of particles and consequently a greater one I accumulate of the powders. Such characteristic assures a resistor begins them much lowland and an elevated operating life of the filter.
The microfiber of glass having to its inside fibers in cellulose is not totally idrorepellente.
|
|
TURBOMAX
Pocket filter leaking in microfiber of glass to elevated leaking surface.
Rigid pocket filter constituted from a plastic and inceneribile chassis. The leaking septum is in microfiber of glass in class of filtration from F5 to F8. Filter to wide surface 28 mq, bassisime losses of cargo, operating long-life
|
|
TURBOPOL
Rigid pocket filter in polypropylene
The rigid pocket filter Turbopol is constituted from a chassis in riciclabile polypropylene. The leaking septum is in polirpopilene 100% idrorepellente. The elevated resistor to the explosion renders the particularly effective filter in onerous atmospheres. Thanks to the intrinsic qualities of the product obtain the following advantages:
Lowlands losses of cargo
Increase of the ability to I accumulate powders
High efficiency begins them
Operating long-life
|
|
|
The ten After Filter-Exhauster combinations are designed to capture dust particles as small as 0.3 microns using cotton sateen cloth filter tubes as the filter media. Equipped with top mounted Exhausters which pull contaminated air to the filter tubes, releasing clean air into the work area, where permitted, or into the atmosphere. They are completely weatherproofed for outdoor applications, when equipped with vent cover. Recommended Exhauster sizes and specifications are to be found in the chart below. Electrically operated, manually controlled shakers are standard on the FT 40S, FT 140S, FT 64S, and FT 164S series, Optional on FT 24S Series.
|
|
Baghouse Filter
Ducon supplies pulse-air and reverse air type baghouse filters for industrial and utility applications. Over the years Ducon has provided hundreds of successfully operating installations for a variety of industries, such as: coal, cement, steel, power, mining and chemical. Ducon's Bag Filters are state of the art, high efficiency, modular filters designed to handle gas volumes from several hundred to several thousand cubic feet per minute. All Ducon Bag Filters are custom designed for optimum air-to-cloth ratios, longer bag life and higher particulate removal efficiencies. For large power plant application Ducon supplies reverse air baghouses utilizing 35 feet long bags. Ducon can provide bags with a wide choice of materials including: Polyester, NOMAX, Acrylic, Teflon, Glass, Ryton, fiberglass, or sintered metal. Ducon baghouse can provide over 90% mercury removal from coal-fired boiler exhaust gases.
Features
- MODULAR DESIGN
- OVER 99.9% EFFICIENCY
- TOP OR SIDE BAG REMOVAL
- POLYESTER, NOMAX, RYTON AND FIBERGLASS BAGS
- SINTERED METAL BAGS FOR UPTO 1500 DEG F TEMP.
- NO INTERNAL MOVING PARTS
- CORROSION RESISTANT CAGES
- LONG BAG LIFE GUARANTEE
- RUGGED CONSTRUCTION
- EXPLOSION VENTS DESIGNS
- DURABLE CASINGS & QUICK ACCESS DOORS
- PLC CONTROL CLEANING
- MINIMUM SITE PREPARATION
- BIN VENTS FOR CONVEYING
- DOUBLE DUMP VALVES FOR MATERIAL DISCHARGE
- REPLACEABLE BAFFLE PLATE
- TURN-KEY INSTALLATIONS
|
|
|
The filter type FBI is a filtering unit with a counter current cleaning system employed to separate pulverized solid products, which are suspended in the air or in other gaseous products. The filter is equipped with a tank to accumulate pressurized air and the sleeves' cleaning system, both contained inside the filter body. The cleaning system is controlled and managed by a cyclic electronic timer with a ?P incorporated. The filter is supplied with the work and pause sequences programmed and may be reprogrammed according to the client's requirement. It is also equipped with a three digit display to visualize the inlet differential pressure. The efficiency of the filter type FBI is within the values prescribed by the current anti-pollution italian law (d.P.R. 203/88). Its construction is also in conformity with european directive and italian law (d. Lgs. 277/91) On noise reduction in the working environment. The filter shape is cylindrical with the sleeves' extraction from the top. Its engineering is a result of the research and experience in the dry filtering with the use of sleeves and optimization of space in the plants. The air-product mixture is suctioned in the filter. The heavier product particles drop to the bottom by gravitational force whilst the lighter rise to the top and are filtered by the filtering sleeves wich are supported by steel frames. All filters may be executed in carbon steel, stainless steel Aisi 304 or Aisi 316, and aluminium.
|
|
|
A modular self-cleaning cartridge collector with the markets most efficient cleaning system gives outstanding filterlife. The modular design makes it possible to tailor-make systems depending on application condition. Made for heavy applications usage.
|
|
|
AP&T´s niche tools and production solutions are available in product areas like deep drawing, fire extinguishers, heat exchangers, air duct parts, pressure vessels and filter housings in blank thickness from 0,5 to 0,9 mm.
|
|
PTM sterilizing grade cartridge filters are manufactured for the specific needs of the pharmaceutical industry. Manufactured with inherently hydrophobic PTFE membrane, these cartridges are designed for use in the filtration of aggressive solvents, and as compressed gas and vent filters. Each cartridge module is individually bubble point tested using 60/40 IPA and water before it is released from manufacture. The cartridge surface area, filter core design, pleat configuration and pleat packing density have been optimized to provide increased cartridge life resulting in lower filtration operating costs. Rugged construction ensures repeatable steaming and testing. PTM grade cartridges are 100% integrity tested.
|
|
Thanks to the advances we have made in research and technology, here at ICT Filtración we have managed to reduce atmospheric emissions following filtering processes to levels far below those required by current European legislation.
Our heat-sealed bags, with reinforcement bonded using ultrasound, ensure comprehensive particle retention.
|
|
Camfil Farr offers a wide range of housings in different versions i.e. galvanised or staniless steel. All Camfil Farr housings are always best in class products.
Example of advatages:
* Easy to install
* Modular construction
* No tools needed to change filters
* Gasket to seal between door and filter
* Clamping device for the filter
* Stable and secure design
|
|
Anticorrosion and impact-resistant breather filters supply contamination-free air to reservoirs. A wide range of replaceable filter elements adapted to the needs of the system ensures the degree of filtration required by the hydraulic filter is obtained.
|
|
TURBOCARTRIDGE
Cartridge filter for systems turbogas.
Cartridges TURBOCARTRIDGE are constituted from a metallic chassis and a septum leaking in cellulose and synthetic fibers idrorepellente, in class of filtration second F7 EN 779. The chassis is planned in steel mesh and introduces a limited number of welding in order to avoid possible oxidations. The real advantages in the passage to cartridge TURBOCARTRIDGE are: better leaking efficiency, greater ability to I accumulate powders, minor loss of cargo, operating long-life and cost reduction of maintenance.
|
|
In addition to standard air cleaners with or without cyclone separators, MAHLE also provides customer-specific air filter elements and air filter housings for passenger cars and commercial vehicles. Air filter elements of various types are used for filtering the intake air. Metal-free filter cartridges with efficient filter media and high dust holding capacity guarantee dust efficiency of up to 99.9 percent. Although cellulose media have predominantly been used for filtration in the past, MAHLE has meanwhile introduced new developments aimed at achieving higher efficiency and dust holding capacities. To this end, multi-layer filter materials made from cellulose, meltblown and nanofibers as well as completely synthetic non-woven materials have already been optimized for mass production.
New developments - air cleaners with activated carbon adsorbers
Owing to the statutory requirements of the North American market, HC adsorbers in the air intake are necessary for reducing emissions. In response to this, MAHLE has integrated an activated carbon element in its air cleaner modules. Hydrocarbons are therefore adsorbed which can then escape via the intake system when the engine is switched off.
|
|
|
Alco Metal Mount Frames are a fabricated EMI aluminum frame gaskets. Metal Mount Frames have a mesh and or elastomer gasket secured into the groove or outside edge of the extrusion. Alco-Knit Gaskets are supplied in standard wire alloys in several configurations and size to meet specific shielding requirements. Elastomer core gaskets may be applied for environmental pressure sealing. Alco Metal Mount Frames are fabricated with specific hole size, location, slots and countersinks for alignment. Ready-to-mount frames are attached to other surfaces using rivets, fasteners or spot welded in place. Frames are supplied unfinished or Chromate Coated per MIL-C-5541 Class 1or 3 to enhance shielding performance and corrosion resistance. Alco Metal Mount Frames are fabricated to customer drawings.
|
|
|
|
