|
|
Lubricator
L03 EconOmist
Features
• Proportional Oil Delivery over a Wide Range of Air Flows
• Precision Needle Valve Assures Repeatable Oil Delivery and Provides Simple Adjustment of Delivery Rate
• Ideal for Low and Ligh flow Applications with Changing Air Flow
• Transparent Sight Dome for 360° Visibility
Lubricator
L18
Features
• Integral Sight Dome and Adjustment Knob
• 1/2" NPT / BSPP-G Over-port
• Fillable Under Pressure
• Quick-disconnect Bowl / Bowl Guard
• Manual Drain
• High Flow Capacities
|
|
|
A range extended for the air conditioning: AS2 - AS3 - AS5 complete Unit FRL, governor automatically-controlled, filters, membrane drier, pressurization progressive, gate valve. Flow from 150 to 10.500 possible Nl/min. Many accessories for all applications
|
|
The FRL range is a complete line of components for the treatment of the compressed-air.
FILTER: Thread from 1/8 to 1". Filtration Grade from 5µm to 50µm. Maximum Pressure 15 bar.
REGULATOR: Thread from 1/8 to 1". Regulation Range from 0-2 to 0-12 bar. Max. Pressure 15 bar.
FILTER REGULATOR: Thread from 1/8 to 1''. Regulation Range from 0-2 to 0-12 bar. Filtration Grade from 5µm to 50µm. Max. Presssure 15 bar.
Condensate Exhaust System: Semi automatic - Manual or Automatic to vacuum-operated.
QUICK EXHAUST REGULATOR: Thread 1/8-1/4. Regulation Range from 0-2 to 0-12 bar. Max. Pressure 15 bar.
LUBRICATOR: Thread from 1/8 to 1''. Max. Pressure 15 bar. Oil Loading System: Manual or Automatic to vaccum-operated.
SHOT OFF VALVE: Thread from 1/8 to 1''. Max Pressure 15 bar. Drive System Manual, Pneumatic, Electropneumatic.
SOFT START VALVE: Thread from 1/8 to 1''. Max. Inlet Pressure 3-10 bar. Drive Sytem Electropneumatic.
FR-L, V-FR-L, F-R-L, V-R-L, F-L are available.
|
|
C3
of plastic, modular design
5 and 20 µm, G1/4 - G1
outlet 0 - 8 bar, max. 8500 l/min
|
|
Assembled Combinations
Sizes Available: Miniature Series 1/8", 1/4" NPT and Compact Series 1/4", 3/8", 1/2" NPT
An assortment of filter, regulator, and lubricator combinations available.
|
|
|
|
|
|
Filters, Regulators, and Lubricators (FRLs)
27 Modular Series Assemblies and Accessories
Filter, Regulator, Lubricator, trio (pictured)
- traditional trio design
- gauge packaged uninstalled for installation on either side
- bowl guard supplied standard
- filter, regulator, and lubricator options available
27 Series combo units offer pre-assembled units for fast installations. The integral filter/regulator offers space saving design. Duo and trio assemblies utilize the modular clamping system to ease installation.
Other Filters, Regulators, and Lubricator Products offered by Coilhose Pneumatics:
Economy Regulators
Pre-Set In-Line Pressure Regulators
Adjustable In-Line Pressure Regulators
In-Line Series F, R, Ls
Miniature Series F (also in Coalescing), R, Ls
Miniature Pro Line F, R, L, Assemblies and Accessories
25 Series F, R, L, A and A
26 Series F (also in C), R, L, A and A
27 Series Modular Series F(also in C), R, L, A and A
Heavy Duty Series F (also in C), R, L, A and Accessories
General Purpose Series F (also in C), R, L, A and A
Dessiccant Air Dryers
Mechanical Condensate Drains
Solid State Automatic Drain
Pressure Gauges
Vacuum and Hydraulic Gauges
|
|
The enhanced ARO-Flo products come in four series, varying in port size and maximum standard cubic feet per minute (scfm) for optimal fit to the application and tools used:
-Miniature 1000 Series with 1/8” and 1/4” ports, and a maximum flow of 27 Liters/sec.
-All-new Compact 1500 Series with 1/4” and 3/8” ports, and a maximum flow of 109 scfm.
-Standard 2000 Series with 3/8”, 1/2”, and 3/4” ports, and a maximum flow of 104 Liters/sec.
-Heavy-Duty 3000 Series with 3/4” and 1” ports, and a maximum flow of 180 Liters/sec.
Key advantages of the upgraded ARO-Flo products are optimal performance and improved safety.
Safety
• Tested to ISO standards
• Locking Bowls
Performance
• Top tier flow performance
• Industry’s largest integral gauge
• 5 micron standard filter
Modularity
• Fully modular units and accessories
• Easy installation and maintenance
|
|
airfit comfort (G3/8 - G1/2 - G3/4)
Operating comfort at the highest level. Down to the smallest detail.
That was the main challenge for HOERBIGER-ORIGA in the development of a new G1/2 series. The result is called airfit comfort - and it lives up to its name.
Advantages:
optimum price/performance ratio
high operating reliability
fast bowl change with bayonet fitting
direct wall-mounting possible
connects to G3/4 air lines using special adapter
corrosion resistant through high quality surface treatment of the zinc die-cast housing
modular design for easy interlock between components
comprehensive range of accessories
all environmentally relevant materials are identified
|
|
MD4
Modular Filters, Regulators, Lubricators with space saving design allowing for use in smaller spaces while providing high flow capacity.
MD4 series have modular clamps that can be disconnected from the front instead of the bottom, making filter element replacement and general maintenance much easier. There is also an option for an adsorber that is designed to remove vapors from the air line that cannot be removed by a coalescing filter. It allows for air to be free of oil and hydrocarbons.
|
|
Max. primary pressure: Transparant bowl 12 Bar/170 PSI
Metal bowl 18 Bar/255 PSI
Temperature: 0-60° C
Water separation capacity: min 90 %
Effective bowl volume: Filter: 20 cc
Lubricator: 45 cc
Material: Housing: Zinc
Transparent bowl: Polycarbonate
Metal bowl: Zinc
Filterelement: Plastic
Top cover: Glassreinforced Polyamid
Diaghragm: Chloroprenerubber with nylon reinforcement
Other parts: Brass, nitrile rubbe
|
|
Max. primary pressure: Metal bowl 18 Bar/255 PSI
Temperature: 0-60 oC
Water separation capacity: min 90 %
Effective bowl volume: Filter 45 cc
Lubricator 120 cc
Material: Housing: Zinc
Metal bowl: Zinc
Filterelement: Plastic
Top cover: Glassreinforced polyamid
Diaghragm: Chloroprenerubber with nylon reinforcement
Other parts: Brass, nitrile rubber
|
|
|
Norgren carries a complete range of air preparation products to fit any application. The most recent addition is the Excelon Pro, a no tools required, light weight FRL. Visit www.norgren.com/excelonpro for more information. All accessories are also available.
|
|
A range extended for the air conditioning:
Complete unit FRL, governor automatically-controlled, filters, membrane drier, pressurization progressive, gate valve. Flow from 150 to 10.500 possible Nl/min.
Many accessories for all applications
|
|
Type FRCLM Series Combined Filter-Regulator-Lubricator Modular Unit (Assembled)
500 - 2800 l/min @ 7 bar
These fully assembled units comprise a conventional combined filter- regulator and lubricator (FRL) in modular configuration.
FEATURES
- Manual filter drain fitted as standard
- Auto drain option
- Push-to-lock non rising regulator control knob
- Constant lubricator oil flow & very low pick-up pressure
- Rugged metal bowl guards
TECHNICAL SPECIFICATIONS
- Medium: Compressed air
- Temperature Range: -10ºC to 60ºC
- Pressure range
- Standard: Input 0.5 to 10 bar
- Output 0.5 to 10 bar
- Options: 0.2 to 2 bar
0.2 to 4 bar
0.5 to 7 bar
- Filtration
- Standard: 40 µm
- Options: 5, 25, 50, 100 µm
- Max Input Pressure: 10 bar
- Gauge Ports: G1/8 (Two)
|
|
|
|
|
|
FRL's - 50 Series
High flow capacity FRL line - Filters, Regulators and Lubricators.
Features:
High Flow
High Pressure
T Handle Adjustment Regulator
Pilot Regulators to 2-1/2 NPT
Rugged Design
Metal Bowls with Sight Glass
1/4 to 1-1/2 NPT Size Range
Assemblies Available
FRL's - FlexiBlok FRL 14/22/32/42 Series
The Numatics 14, 22, 32, and 42 Series FlexiBlok¨ line is a series of high performance air preparation products. Introduced in 1997, the FlexiBlok¨ line is made from sturdy but light weight aluminum; perfect for applications such as robotic arms which cannot afford extra weight and less expensive to ship than zinc. The block head design with integrated mounting holes eliminates costly mounting plates and adapters, making the product easier to use and install. Private labeling is easy thanks to the special templates which snap securely in the front and back of the heads. These templates can be customized with names and/or logos; perfect for OEM applications.
The 14,22,32 series conforms to ISO 1179-1 and 228-1 requirements.
The 42 series will soon also conform to these requirements.
|
|
THREE-UNIT CLOSE NIPPLED COMBINATION
14A Miniature Series
FEATURES:
Unique Deflector Plate Ensuring Maximum Water & Dirt Separation
Solid Control Piston with Lip Seal for Extended Life
Non-Rising Adjusting Knob
Proportional Oil Delivery Over a Wide Range of Air Flows
Generates Oil Particles of 5 Micron or Smaller Downstream to Lubricate Systems Having Complex Piping Arrangements
|
|
Air Line Lubricator
Sizes Available: Miniature Series 1/8", 1/4" NPT, Compact Series 1/4", 3/8", 1/2" NPT, Large Series 1", 1-1/2" NPT
Air line mist lubricator distributes oil into the compressed air line, significantly increasing the life of downstream equipment such as valves and actuators.
Bowl available in transparent polycarbonate or metal zinc die cast.
Bowl capacity: Miniature: 17cc, Compact: 160 cc, Large: 1 litre
|
|
The 09L Hi-Flow Mist Air Lubricator is designed to provide lubrication for most general applications in a pneumatic system. Units should be installed close to the application ensuring effective distribution of oil to pneumatic components.
FEATURES:
Metal Bowl With Sight Gauge & Manual Drain - Standard
Proportional Oil Delivery Over a Wide Range of Air Flows
Bowl Can Be Filled While Air Line is Under Pressure
Transparent Sight Dome for 360° Visibility
|
|
| ... products without technical information |
| |
ain areas of application are for mechanical engineering applications with demanding requirements for a defined lubrication: Ensuring a high degree of efficiency with minimal wear and long life, particularly in relation to tool spindles.
How it works: A flow of air inside a narrow tube teases a droplet of oil apart to form streaks that are then transported to the lubrication point. A nozzle continually supplies the bearing with oil in the form of fine droplets. The transporting air stream is practically oil-free upon leaving the bearing.
|
|
SKF Air-driven Hydraulic Pumps, THAP series
30, 150, 300 and 400 MPa (4 350, 21 750, 43 500 and 58 000 psi)
The THAP Air-driven Hydraulic Pumps are available in four different pressure versions. They can be used for mounting OK Couplings, large pressure joints such as bearings, flywheels, couplings and railway wheels. The pumps consist of a high-pressure hydraulic pump, driven by an air piston.
The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets, which consists of pump, pressure gauge, adapter block, highpressure pipe and connection nipples.
|
|
|
|